Add support for the frontend DAI of the capture interface which is in
charge of receiving decoded data from "audin-decoder-i2s" and move them to
an internal FIFO before they are block-transferring to RAM.
This component could ideally handle multiple input sources (SPDIF, I2S,
PCM, HDMI), but for the time being only I2S is added and has been tested.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
---
sound/soc/meson/Kconfig | 9 +
sound/soc/meson/Makefile | 2 +
sound/soc/meson/audin-fifo.c | 432 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 443 insertions(+)
diff --git a/sound/soc/meson/Kconfig b/sound/soc/meson/Kconfig
index 0a1d166bed3477efdaffa8538150f7aca33a29e6..50307e54f96fda0f9c114c3bff6aae4094018934 100644
--- a/sound/soc/meson/Kconfig
+++ b/sound/soc/meson/Kconfig
@@ -19,6 +19,14 @@ config SND_MESON_GX_AUDIN_DECODER_I2S
Select Y or M to add support for the I2S audio input decoder found
in the Amlogic GX SoC family
+config SND_MESON_GX_AUDIN_FIFO
+ tristate "Amlogic GX AUDIN FIFO"
+ select REGMAP_MMIO
+ imply SND_MESON_AIU
+ help
+ Select Y or M to add support for the frontend capture interfaces
+ embedded in the Amlogic GX SoC family
+
config SND_MESON_AXG_FIFO
tristate
select REGMAP_MMIO
@@ -116,6 +124,7 @@ config SND_MESON_GX_SOUND_CARD
select SND_MESON_CARD_UTILS
imply SND_MESON_AIU
imply SND_MESON_GX_AUDIN_DECODER_I2S
+ imply SND_MESON_GX_AUDIN_FIFO
help
Select Y or M to add support for the GXBB/GXL SoC sound card
diff --git a/sound/soc/meson/Makefile b/sound/soc/meson/Makefile
index a5a8e5b5a3bb8ca8ca0f27e1a29865e0dab64b73..085ddcdc87639d5d79aa39152eafc030f2643e2e 100644
--- a/sound/soc/meson/Makefile
+++ b/sound/soc/meson/Makefile
@@ -11,6 +11,7 @@ snd-soc-meson-aiu-y += aiu-fifo.o
snd-soc-meson-aiu-y += aiu-fifo-i2s.o
snd-soc-meson-aiu-y += aiu-fifo-spdif.o
snd-soc-meson-gx-audin-decoder-i2s-y := audin-decoder-i2s.o
+snd-soc-meson-gx-audin-fifo-y := audin-fifo.o
snd-soc-meson-axg-fifo-y := axg-fifo.o
snd-soc-meson-axg-frddr-y := axg-frddr.o
snd-soc-meson-axg-toddr-y := axg-toddr.o
@@ -31,6 +32,7 @@ snd-soc-meson-t9015-y := t9015.o
obj-$(CONFIG_SND_MESON_AIU) += snd-soc-meson-aiu.o
obj-$(CONFIG_SND_MESON_GX_AUDIN_DECODER_I2S) += snd-soc-meson-gx-audin-decoder-i2s.o
+obj-$(CONFIG_SND_MESON_GX_AUDIN_FIFO) += snd-soc-meson-gx-audin-fifo.o
obj-$(CONFIG_SND_MESON_AXG_FIFO) += snd-soc-meson-axg-fifo.o
obj-$(CONFIG_SND_MESON_AXG_FRDDR) += snd-soc-meson-axg-frddr.o
obj-$(CONFIG_SND_MESON_AXG_TODDR) += snd-soc-meson-axg-toddr.o
diff --git a/sound/soc/meson/audin-fifo.c b/sound/soc/meson/audin-fifo.c
new file mode 100644
index 0000000000000000000000000000000000000000..62f0b03cdfc33056e3be7aaf7333ab71086a9c25
--- /dev/null
+++ b/sound/soc/meson/audin-fifo.c
@@ -0,0 +1,432 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2026 BayLibre, SAS.
+// Author: Valerio Setti <vsetti@baylibre.com>
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <sound/pcm_params.h>
+#include <linux/dma-mapping.h>
+#include <linux/hrtimer.h>
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+
+/* FIFO registers */
+#define AUDIN_FIFO_START 0x00
+#define AUDIN_FIFO_END 0x04
+#define AUDIN_FIFO_PTR 0x08
+
+/* FIFOx CTRL registers and bits */
+#define AUDIN_FIFO_CTRL 0x14
+#define AUDIN_FIFO_CTRL_EN BIT(0)
+#define AUDIN_FIFO_CTRL_RST BIT(1)
+#define AUDIN_FIFO_CTRL_LOAD BIT(2)
+#define AUDIN_FIFO_CTRL_DIN_SEL_OFF 3
+#define AUDIN_FIFO_CTRL_DIN_SEL_MASK GENMASK(5, 3)
+#define AUDIN_FIFO_CTRL_ENDIAN_MASK GENMASK(10, 8)
+#define AUDIN_FIFO_CTRL_CHAN_MASK GENMASK(14, 11)
+#define AUDIN_FIFO_CTRL_UG BIT(15)
+
+/* FIFOx_CTRL1 registers and bits */
+#define AUDIN_FIFO_CTRL1 0x18
+#define AUDIN_FIFO_CTRL1_DIN_POS_2 BIT(7)
+#define AUDIN_FIFO_CTRL1_DIN_BYTE_NUM_MASK GENMASK(3, 2)
+#define AUDIN_FIFO_CTRL1_DIN_POS_01_MASK GENMASK(1, 0)
+
+/* This is the size of the FIFO (i.e. 64*64 bytes). */
+#define AUDIN_FIFO_I2S_BLOCK 4096
+
+static const struct snd_pcm_hardware audin_fifo_pcm_hw = {
+ .info = (SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_MMAP |
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_PAUSE),
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .rate_min = 5512,
+ .rate_max = 192000,
+ .channels_min = 2,
+ .channels_max = 2,
+ .period_bytes_min = 2 * AUDIN_FIFO_I2S_BLOCK,
+ .period_bytes_max = AUDIN_FIFO_I2S_BLOCK * USHRT_MAX,
+ .periods_min = 2,
+ .periods_max = UINT_MAX,
+
+ /* No real justification for this */
+ .buffer_bytes_max = 1 * 1024 * 1024,
+};
+
+struct audin_fifo_drvdata {
+ struct clk *input_clk;
+};
+
+struct audin_fifo_dai_data {
+ /*
+ * The AUDIN peripheral has an IRQ to signal when data is received, but
+ * it cannot grant a periodic behavior. The reason is that the register
+ * which holds the address which triggers the IRQ must be updated
+ * continuously. This create a risk of overflow if for any reason the
+ * ISR execution is delayed. Using a periodic time is therefore simpler
+ * and more reliable.
+ */
+ struct hrtimer polling_timer;
+ ktime_t poll_time_ns;
+ struct snd_pcm_substream *substream;
+};
+
+static int audin_fifo_dai_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_component *component = dai->component;
+ (void) dai;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ snd_soc_component_update_bits(component, AUDIN_FIFO_CTRL,
+ AUDIN_FIFO_CTRL_EN,
+ AUDIN_FIFO_CTRL_EN);
+ break;
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ case SNDRV_PCM_TRIGGER_STOP:
+ snd_soc_component_update_bits(component, AUDIN_FIFO_CTRL,
+ AUDIN_FIFO_CTRL_EN, 0);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int audin_fifo_dai_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_component *component = dai->component;
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ dma_addr_t dma_end = runtime->dma_addr + runtime->dma_bytes - 8;
+ unsigned int val;
+
+ /* Setup memory boundaries */
+ snd_soc_component_write(component, AUDIN_FIFO_START, runtime->dma_addr);
+ snd_soc_component_write(component, AUDIN_FIFO_PTR, runtime->dma_addr);
+ snd_soc_component_write(component, AUDIN_FIFO_END, dma_end);
+
+ /* Load new addresses */
+ val = AUDIN_FIFO_CTRL_LOAD | AUDIN_FIFO_CTRL_UG;
+ snd_soc_component_update_bits(component, AUDIN_FIFO_CTRL, val, val);
+
+ /* Reset */
+ snd_soc_component_update_bits(dai->component, AUDIN_FIFO_CTRL,
+ AUDIN_FIFO_CTRL_RST,
+ AUDIN_FIFO_CTRL_RST);
+
+ return 0;
+}
+
+static int audin_fifo_dai_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_component *component = dai->component;
+ struct audin_fifo_dai_data *data = snd_soc_dai_dma_data_get_capture(dai);
+ unsigned int val;
+
+ if (params_width(params) != 16) {
+ dev_err(dai->dev, "Unsupported width %u\n",
+ params_physical_width(params));
+ return -EINVAL;
+ }
+
+ /*
+ * FIFO is filled line by line and each of them is 8 bytes. The
+ * problem is that each line is filled starting from the end,
+ * so we need to properly reorder them before moving to the
+ * RAM. This is the value required to properly re-order samples stored
+ * in 16 bit format.
+ */
+ val = FIELD_PREP(AUDIN_FIFO_CTRL_ENDIAN_MASK, 6);
+ snd_soc_component_update_bits(component, AUDIN_FIFO_CTRL,
+ AUDIN_FIFO_CTRL_ENDIAN_MASK, val);
+
+ /*
+ * The I2S input decoder passed 24 bits of left-justified data
+ * but for the time being we only 16 bit formatted samples which means
+ * that we drop the LSB.
+ */
+ val = FIELD_PREP(AUDIN_FIFO_CTRL1_DIN_POS_01_MASK, 1);
+ snd_soc_component_update_bits(component, AUDIN_FIFO_CTRL1,
+ AUDIN_FIFO_CTRL1_DIN_POS_01_MASK,
+ val);
+
+ /* Set sample size to 2 bytes (16 bit) */
+ val = FIELD_PREP(AUDIN_FIFO_CTRL1_DIN_BYTE_NUM_MASK, 1);
+ snd_soc_component_update_bits(component, AUDIN_FIFO_CTRL1,
+ AUDIN_FIFO_CTRL1_DIN_BYTE_NUM_MASK,
+ val);
+
+ /*
+ * This is a bit counterintuitive. Even though the platform has a single
+ * pin for I2S input which would mean that we can only support 2
+ * channels, doing so would cause samples to be stored in a weird way
+ * into the FIFO: all the samples from the 1st channel on the 1st half
+ * of the FIFO, then samples from the 2nd channel in the other half. Of
+ * course extra work would be required to properly interleave them
+ * before returning to the userspace.
+ * Setting a single channel mode instead solves the problem: samples
+ * from 1st and 2nd channel are stored interleaved and sequentially in
+ * the FIFO.
+ */
+ val = FIELD_PREP(AUDIN_FIFO_CTRL_CHAN_MASK, 1);
+ snd_soc_component_update_bits(component, AUDIN_FIFO_CTRL,
+ AUDIN_FIFO_CTRL_CHAN_MASK, val);
+
+ /* Setup the period for the polling timer and start it. */
+ data->poll_time_ns = NSEC_PER_SEC * params_period_size(params) /
+ params_rate(params);
+
+ hrtimer_start(&data->polling_timer, data->poll_time_ns,
+ HRTIMER_MODE_REL);
+
+ return 0;
+}
+
+static int audin_fifo_dai_hw_free(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct audin_fifo_dai_data *data = snd_soc_dai_dma_data_get_capture(dai);
+ (void) substream;
+
+ hrtimer_cancel(&data->polling_timer);
+
+ return 0;
+}
+
+static int audin_fifo_dai_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct audin_fifo_dai_data *data = snd_soc_dai_dma_data_get_capture(dai);
+ int ret;
+
+ snd_soc_set_runtime_hwparams(substream, &audin_fifo_pcm_hw);
+
+ ret = snd_pcm_hw_constraint_step(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
+ AUDIN_FIFO_I2S_BLOCK);
+ if (ret) {
+ dev_err(dai->dev, "Failed to set runtime constraint %d\n", ret);
+ return ret;
+ }
+
+ ret = snd_pcm_hw_constraint_step(substream->runtime, 0,
+ SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
+ AUDIN_FIFO_I2S_BLOCK);
+ if (ret) {
+ dev_err(dai->dev, "Failed to set runtime constraint %d\n", ret);
+ return ret;
+ }
+
+ data->substream = substream;
+
+ return ret;
+}
+
+static int audin_fifo_dai_pcm_new(struct snd_soc_pcm_runtime *rtd,
+ struct snd_soc_dai *dai)
+{
+ int ret;
+
+ ret = dma_coerce_mask_and_coherent(dai->dev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err(dai->dev, "Failed to set DMA mask %d\n", ret);
+ return ret;
+ }
+
+ ret = snd_pcm_set_managed_buffer_all(rtd->pcm, SNDRV_DMA_TYPE_DEV,
+ dai->dev,
+ audin_fifo_pcm_hw.buffer_bytes_max,
+ audin_fifo_pcm_hw.buffer_bytes_max);
+ if (ret) {
+ dev_err(dai->dev, "Failed to set PCM managed buffer %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static enum hrtimer_restart dai_timer_cb(struct hrtimer *timer)
+{
+ struct audin_fifo_dai_data *data =
+ container_of(timer, struct audin_fifo_dai_data, polling_timer);
+ snd_pcm_period_elapsed(data->substream);
+ hrtimer_forward_now(timer, data->poll_time_ns);
+ return HRTIMER_RESTART;
+}
+
+static int audin_fifo_dai_probe(struct snd_soc_dai *dai)
+{
+ struct audin_fifo_dai_data *data;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ hrtimer_setup(&data->polling_timer, dai_timer_cb, CLOCK_MONOTONIC,
+ HRTIMER_MODE_REL);
+
+ snd_soc_dai_dma_data_set_capture(dai, data);
+
+ return 0;
+}
+
+static int audin_fifo_dai_remove(struct snd_soc_dai *dai)
+{
+ kfree(snd_soc_dai_dma_data_get_capture(dai));
+
+ return 0;
+}
+
+const struct snd_soc_dai_ops audin_fifo_dai_ops = {
+ .trigger = audin_fifo_dai_trigger,
+ .prepare = audin_fifo_dai_prepare,
+ .hw_params = audin_fifo_dai_hw_params,
+ .hw_free = audin_fifo_dai_hw_free,
+ .startup = audin_fifo_dai_startup,
+ .pcm_new = audin_fifo_dai_pcm_new,
+ .probe = audin_fifo_dai_probe,
+ .remove = audin_fifo_dai_remove,
+};
+
+static struct snd_soc_dai_driver audin_fifo_dai_drv[] = {
+ {
+ .name = "FIFO",
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_CONTINUOUS,
+ .rate_min = 5512,
+ .rate_max = 192000,
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ },
+ .ops = &audin_fifo_dai_ops,
+ },
+};
+
+static snd_pcm_uframes_t
+audin_fifo_component_pointer(struct snd_soc_component *component,
+ struct snd_pcm_substream *substream)
+{
+ unsigned int start, ptr;
+
+ start = snd_soc_component_read(component, AUDIN_FIFO_START);
+ ptr = snd_soc_component_read(component, AUDIN_FIFO_PTR);
+
+ return bytes_to_frames(substream->runtime, ptr - start);
+}
+
+static const char * const audin_fifo_fifo_input_sel_texts[] = {
+ "SPDIF", "I2S", "PCM", "HDMI", "Demodulator"
+};
+
+static SOC_ENUM_SINGLE_DECL(audin_fifo_input_sel_enum, AUDIN_FIFO_CTRL,
+ AUDIN_FIFO_CTRL_DIN_SEL_OFF,
+ audin_fifo_fifo_input_sel_texts);
+
+static const struct snd_kcontrol_new audin_fifo_input_sel_mux =
+ SOC_DAPM_ENUM("SRC SEL", audin_fifo_input_sel_enum);
+
+static const struct snd_soc_dapm_widget audin_fifo_dapm_widgets[] = {
+ SND_SOC_DAPM_AIF_IN("I2S IN", NULL, 0, SND_SOC_NOPM, 0, 0),
+ SND_SOC_DAPM_MUX("SRC SEL", SND_SOC_NOPM, 0, 0,
+ &audin_fifo_input_sel_mux),
+};
+
+static const struct snd_soc_dapm_route audin_fifo_dapm_routes[] = {
+ { "SRC SEL", "I2S", "I2S IN" },
+ { "Capture", NULL, "SRC SEL" },
+};
+
+static const struct snd_soc_component_driver audin_fifo_component = {
+ .dapm_widgets = audin_fifo_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(audin_fifo_dapm_widgets),
+ .dapm_routes = audin_fifo_dapm_routes,
+ .num_dapm_routes = ARRAY_SIZE(audin_fifo_dapm_routes),
+ .pointer = audin_fifo_component_pointer,
+};
+
+static const struct regmap_config audin_fifo_regmap_cfg = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = 0x1b,
+};
+
+static int audin_fifo_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ void __iomem *regs;
+ struct regmap *map;
+ struct audin_fifo_drvdata *data;
+ int ret;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (data == NULL)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, data);
+
+ regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
+
+ map = devm_regmap_init_mmio(dev, regs, &audin_fifo_regmap_cfg);
+ if (IS_ERR(map)) {
+ dev_err(dev, "Failed to init regmap: %ld\n", PTR_ERR(map));
+ return PTR_ERR(map);
+ }
+
+ data->input_clk = devm_clk_get_enabled(dev, "i2s_input_clk");
+ if (IS_ERR(data->input_clk)) {
+ dev_err(dev, "can't get the i2s input clock\n");
+ return PTR_ERR(data->input_clk);
+ }
+
+ ret = snd_soc_register_component(dev, &audin_fifo_component,
+ audin_fifo_dai_drv,
+ ARRAY_SIZE(audin_fifo_dai_drv));
+ if (ret) {
+ dev_err(dev, "failed to register component\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static void audin_fifo_remove(struct platform_device *pdev)
+{
+ struct audin_fifo_drvdata *data = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(data->input_clk);
+ snd_soc_unregister_component(&pdev->dev);
+}
+
+static const struct of_device_id audin_fifo_of_match[] = {
+ { .compatible = "amlogic,meson-gxbb-audin-fifo", .data = NULL },
+ {}
+};
+MODULE_DEVICE_TABLE(of, audin_fifo_of_match);
+
+static struct platform_driver audin_fifo_pdrv = {
+ .probe = audin_fifo_probe,
+ .remove = audin_fifo_remove,
+ .driver = {
+ .name = "meson-gx-audin-fifo",
+ .of_match_table = audin_fifo_of_match,
+ },
+};
+module_platform_driver(audin_fifo_pdrv);
+
+MODULE_DESCRIPTION("Meson AUDIN FIFO Driver");
+MODULE_AUTHOR("Valerio Setti <vsetti@baylibre.com>");
+MODULE_LICENSE("GPL");
--
2.39.5© 2016 - 2026 Red Hat, Inc.