[PATCH] pmdomain: imx: Make IMX8M/IMX9 BLK_CTRL tristate

Zhipeng Wang posted 1 patch 2 months ago
There is a newer version of this series
drivers/pmdomain/imx/Kconfig | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
[PATCH] pmdomain: imx: Make IMX8M/IMX9 BLK_CTRL tristate
Posted by Zhipeng Wang 2 months ago
Convert IMX8M_BLK_CTRL and IMX9_BLK_CTRL from bool to tristate
to allow building as loadable modules.

Add prompt strings to make these options visible and configurable
in menuconfig, keeping them enabled by default on appropriate platforms.

Also remove the IMX_GPCV2_PM_DOMAINS dependency from IMX9_BLK_CTRL
since i.MX93 doesn't use GPCv2 power domains.

Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
---
 drivers/pmdomain/imx/Kconfig | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/pmdomain/imx/Kconfig b/drivers/pmdomain/imx/Kconfig
index 00203615c65e..9168d183b0c5 100644
--- a/drivers/pmdomain/imx/Kconfig
+++ b/drivers/pmdomain/imx/Kconfig
@@ -10,15 +10,18 @@ config IMX_GPCV2_PM_DOMAINS
 	default y if SOC_IMX7D
 
 config IMX8M_BLK_CTRL
-	bool
-	default SOC_IMX8M && IMX_GPCV2_PM_DOMAINS
+	tristate "i.MX8M BLK CTRL driver"
+	depends on SOC_IMX8M
+	depends on IMX_GPCV2_PM_DOMAINS
 	depends on PM_GENERIC_DOMAINS
 	depends on COMMON_CLK
+	default y
 
 config IMX9_BLK_CTRL
-	bool
-	default SOC_IMX9 && IMX_GPCV2_PM_DOMAINS
+	tristate "i.MX93 BLK CTRL driver"
+	depends on SOC_IMX9
 	depends on PM_GENERIC_DOMAINS
+	default y
 
 config IMX_SCU_PD
 	bool "IMX SCU Power Domain driver"
-- 
2.34.1
Re: [PATCH] pmdomain: imx: Make IMX8M/IMX9 BLK_CTRL tristate
Posted by Frank Li 2 months ago
On Fri, Apr 10, 2026 at 06:27:35PM +0900, Zhipeng Wang wrote:
> Convert IMX8M_BLK_CTRL and IMX9_BLK_CTRL from bool to tristate
> to allow building as loadable modules.
>
> Add prompt strings to make these options visible and configurable
> in menuconfig, keeping them enabled by default on appropriate platforms.
>
> Also remove the IMX_GPCV2_PM_DOMAINS dependency from IMX9_BLK_CTRL
> since i.MX93 doesn't use GPCv2 power domains.

Does it cause build failure at GPCv2 platform? Or previous dependency
actually wrong.

Frank
>
> Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
> ---
>  drivers/pmdomain/imx/Kconfig | 11 +++++++----
>  1 file changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/pmdomain/imx/Kconfig b/drivers/pmdomain/imx/Kconfig
> index 00203615c65e..9168d183b0c5 100644
> --- a/drivers/pmdomain/imx/Kconfig
> +++ b/drivers/pmdomain/imx/Kconfig
> @@ -10,15 +10,18 @@ config IMX_GPCV2_PM_DOMAINS
>  	default y if SOC_IMX7D
>
>  config IMX8M_BLK_CTRL
> -	bool
> -	default SOC_IMX8M && IMX_GPCV2_PM_DOMAINS
> +	tristate "i.MX8M BLK CTRL driver"
> +	depends on SOC_IMX8M
> +	depends on IMX_GPCV2_PM_DOMAINS
>  	depends on PM_GENERIC_DOMAINS
>  	depends on COMMON_CLK
> +	default y
>
>  config IMX9_BLK_CTRL
> -	bool
> -	default SOC_IMX9 && IMX_GPCV2_PM_DOMAINS
> +	tristate "i.MX93 BLK CTRL driver"
> +	depends on SOC_IMX9
>  	depends on PM_GENERIC_DOMAINS
> +	default y
>
>  config IMX_SCU_PD
>  	bool "IMX SCU Power Domain driver"
> --
> 2.34.1
>