From: Teguh Sobirin <teguh@sobir.in>

The AYN Odin 2 Mini is a high-performance Android-based handheld gaming
console powered by the Qualcomm Snapdragon 8 Gen 2 processor featuring a
5-inch mini-led touchscreen.

Signed-off-by: Teguh Sobirin <teguh@sobir.in>
Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/Makefile                  |  1 +
 .../boot/dts/qcom/qcs8550-ayntec-odin2mini.dts     | 44 ++++++++++++++++++++++
 2 files changed, 45 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 4ba8e730641949..aceb84a060f80e 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -184,6 +184,7 @@ qcs8300-ride-el2-dtbs := qcs8300-ride.dtb monaco-el2.dtbo
 
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs8300-ride-el2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-ayntec-odin2mini.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs9100-ride-r3.dtb
 
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-ayntec-odin2mini.dts b/arch/arm64/boot/dts/qcom/qcs8550-ayntec-odin2mini.dts
new file mode 100644
index 00000000000000..cc894bdd0c9020
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8550-ayntec-odin2mini.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Teguh Sobirin.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "qcs8550-ayntec-common.dtsi"
+
+&{/} {
+	model = "AYN Odin 2 Mini";
+	compatible = "ayntec,odin2mini", "qcom,qcs8550", "qcom,sm8550";
+
+	vdd_disp_2v8: vdd-disp-2v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_disp_2v8";
+
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		gpio = <&tlmm 142 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+/* There is an hdmi bridge on i2c_hub_0@48, but it is not currently supported */
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sm8550/ayntec/odin2mini/adsp.mbn",
+			"qcom/sm8550/ayntec/odin2mini/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&spk_amp_l {
+	firmware-name = "qcom/sm8550/ayntec/odin2mini/aw883xx_acf.bin";
+};
+
+&spk_amp_r {
+	firmware-name = "qcom/sm8550/ayntec/odin2mini/aw883xx_acf.bin";
+};
+

-- 
2.53.0