The PTP subsystem has grown beyond the original IEEE 1588/NIC use case
and today contains both network-oriented PHC drivers and various
emulated/virtual clock implementations.

Prepare for clearer ownership and future maintenance by moving the
emulated/virtual/non-NIC PTP clock drivers into a dedicated subdirectory,
with its own Kconfig and Makefile.

The network/IEEE 1588 oriented drivers remain in drivers/ptp/ alongside
the PTP core infrastructure:

  - drivers/ptp/          : PTP core infrastructure and IEEE 1588 /
                            network-oriented clock drivers.

  - drivers/ptp/emulated/ : emulated/virtual/non-NIC implementations
                            that expose high-precision time sources via
                            the PTP interface but are not tied to the
                            NIC/packet-timestamping pipeline.

No functional changes are intended; this is a refactor only.

Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
---
 drivers/ptp/Kconfig                         | 68 ++++-----------------
 drivers/ptp/Makefile                        | 11 ++--
 drivers/ptp/emulated/Kconfig                | 61 ++++++++++++++++++
 drivers/ptp/emulated/Makefile               | 11 ++++
 drivers/ptp/{ => emulated}/ptp_kvm_arm.c    |  0
 drivers/ptp/{ => emulated}/ptp_kvm_common.c |  0
 drivers/ptp/{ => emulated}/ptp_kvm_x86.c    |  0
 drivers/ptp/{ => emulated}/ptp_s390.c       |  0
 drivers/ptp/{ => emulated}/ptp_vmclock.c    |  0
 drivers/ptp/{ => emulated}/ptp_vmw.c        |  0
 10 files changed, 87 insertions(+), 64 deletions(-)
 create mode 100644 drivers/ptp/emulated/Kconfig
 create mode 100644 drivers/ptp/emulated/Makefile
 rename drivers/ptp/{ => emulated}/ptp_kvm_arm.c (100%)
 rename drivers/ptp/{ => emulated}/ptp_kvm_common.c (100%)
 rename drivers/ptp/{ => emulated}/ptp_kvm_x86.c (100%)
 rename drivers/ptp/{ => emulated}/ptp_s390.c (100%)
 rename drivers/ptp/{ => emulated}/ptp_vmclock.c (100%)
 rename drivers/ptp/{ => emulated}/ptp_vmw.c (100%)

diff --git a/drivers/ptp/Kconfig b/drivers/ptp/Kconfig
index b93640ca08b7..4cb199332546 100644
--- a/drivers/ptp/Kconfig
+++ b/drivers/ptp/Kconfig
@@ -20,11 +20,16 @@ config PTP_1588_CLOCK
 	  time stamping units, it can be possible to achieve
 	  synchronization to within a few hundred nanoseconds.
 
-	  This driver adds support for PTP clocks as character
-	  devices. If you want to use a PTP clock, then you should
-	  also enable at least one clock driver as well.
+	  This infrastructure adds support for PTP clocks as character
+	  devices. It has since evolved into a general-purpose PTP
+	  clock framework also used by high-precision clocks exposed
+	  by platforms, hypervisors or special hardware, beyond the
+	  traditional NIC/IEEE 1588 use case.
 
-	  To compile this driver as a module, choose M here: the module
+	  If you want to use any PTP clock device, enable this option
+	  and at least one clock driver.
+
+	  To compile the core as a module, choose M here: the module
 	  will be called ptp.
 
 config PTP_1588_CLOCK_OPTIONAL
@@ -119,35 +124,6 @@ config PTP_1588_CLOCK_PCH
 	  To compile this driver as a module, choose M here: the module
 	  will be called ptp_pch.
 
-config PTP_1588_CLOCK_KVM
-	tristate "KVM virtual PTP clock"
-	depends on PTP_1588_CLOCK
-	depends on (KVM_GUEST && X86) || (HAVE_ARM_SMCCC_DISCOVERY && ARM_ARCH_TIMER)
-	default y
-	help
-	  This driver adds support for using kvm infrastructure as a PTP
-	  clock. This clock is only useful if you are using KVM guests.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called ptp_kvm.
-
-config PTP_1588_CLOCK_VMCLOCK
-	tristate "Virtual machine PTP clock"
-	depends on X86_TSC || ARM_ARCH_TIMER
-	depends on PTP_1588_CLOCK && ARCH_SUPPORTS_INT128
-	default PTP_1588_CLOCK_KVM
-	help
-	  This driver adds support for using a virtual precision clock
-	  advertised by the hypervisor. This clock is only useful in virtual
-	  machines where such a device is present.
-
-	  Unlike the KVM virtual PTP clock, the VMCLOCK device offers support
-	  for reliable timekeeping even across live migration. So this driver
-	  is enabled by default whenever the KVM PTP clock is.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called ptp_vmclock.
-
 config PTP_1588_CLOCK_IDT82P33
 	tristate "IDT 82P33xxx PTP clock"
 	depends on PTP_1588_CLOCK && I2C
@@ -195,18 +171,6 @@ config PTP_1588_CLOCK_MOCK
 	  To compile this driver as a module, choose M here: the module
 	  will be called ptp_mock.
 
-config PTP_1588_CLOCK_VMW
-	tristate "VMware virtual PTP clock"
-	depends on ACPI && HYPERVISOR_GUEST && X86
-	depends on PTP_1588_CLOCK
-	help
-	  This driver adds support for using VMware virtual precision
-	  clock device as a PTP clock. This is only useful in virtual
-	  machines running on VMware virtual infrastructure.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called ptp_vmw.
-
 config PTP_1588_CLOCK_OCP
 	tristate "OpenCompute TimeCard as PTP clock"
 	depends on PTP_1588_CLOCK
@@ -241,18 +205,6 @@ config PTP_DFL_TOD
 	  To compile this driver as a module, choose M here: the module
 	  will be called ptp_dfl_tod.
 
-config PTP_S390
-	tristate "S390 PTP driver"
-	depends on PTP_1588_CLOCK
-	depends on S390
-	help
-	  This driver adds support for S390 time steering via the PtP
-	  interface. This works by adding a in-kernel clock delta value,
-	  which is always added to time values used in the kernel. The PtP
-	  driver provides the raw clock value without the delta to
-	  userspace. That way userspace programs like chrony could steer
-	  the kernel clock.
-
 config PTP_NETC_V4_TIMER
 	tristate "NXP NETC V4 Timer PTP Driver"
 	depends on PTP_1588_CLOCK
@@ -263,4 +215,6 @@ config PTP_NETC_V4_TIMER
 	  synchronization. It also supports periodic output signal (e.g. PPS)
 	  and external trigger timestamping.
 
+source "drivers/ptp/emulated/Kconfig"
+
 endmenu
diff --git a/drivers/ptp/Makefile b/drivers/ptp/Makefile
index bdc47e284f14..bcea2d3d4efd 100644
--- a/drivers/ptp/Makefile
+++ b/drivers/ptp/Makefile
@@ -1,24 +1,21 @@
 # SPDX-License-Identifier: GPL-2.0
 #
-# Makefile for PTP 1588 clock support.
+# Makefile for PTP clock support.
 #
 
+subdir-ccflags-y += -I$(srctree)/drivers/ptp
+
 ptp-y					:= ptp_clock.o ptp_chardev.o ptp_sysfs.o ptp_vclock.o
-ptp_kvm-$(CONFIG_X86)			:= ptp_kvm_x86.o ptp_kvm_common.o
-ptp_kvm-$(CONFIG_HAVE_ARM_SMCCC)	:= ptp_kvm_arm.o ptp_kvm_common.o
 obj-$(CONFIG_PTP_1588_CLOCK)		+= ptp.o
 obj-$(CONFIG_PTP_1588_CLOCK_DTE)	+= ptp_dte.o
 obj-$(CONFIG_PTP_1588_CLOCK_INES)	+= ptp_ines.o
 obj-$(CONFIG_PTP_1588_CLOCK_PCH)	+= ptp_pch.o
-obj-$(CONFIG_PTP_1588_CLOCK_KVM)	+= ptp_kvm.o
-obj-$(CONFIG_PTP_1588_CLOCK_VMCLOCK)	+= ptp_vmclock.o
 obj-$(CONFIG_PTP_1588_CLOCK_QORIQ)	+= ptp_qoriq.o
 obj-$(CONFIG_PTP_1588_CLOCK_IDTCM)	+= ptp_clockmatrix.o
 obj-$(CONFIG_PTP_1588_CLOCK_FC3W)	+= ptp_fc3.o
 obj-$(CONFIG_PTP_1588_CLOCK_IDT82P33)	+= ptp_idt82p33.o
 obj-$(CONFIG_PTP_1588_CLOCK_MOCK)	+= ptp_mock.o
-obj-$(CONFIG_PTP_1588_CLOCK_VMW)	+= ptp_vmw.o
 obj-$(CONFIG_PTP_1588_CLOCK_OCP)	+= ptp_ocp.o
 obj-$(CONFIG_PTP_DFL_TOD)		+= ptp_dfl_tod.o
-obj-$(CONFIG_PTP_S390)			+= ptp_s390.o
 obj-$(CONFIG_PTP_NETC_V4_TIMER)		+= ptp_netc.o
+obj-$(CONFIG_PTP_1588_CLOCK)		+= emulated/
diff --git a/drivers/ptp/emulated/Kconfig b/drivers/ptp/emulated/Kconfig
new file mode 100644
index 000000000000..3e11f78dfbd8
--- /dev/null
+++ b/drivers/ptp/emulated/Kconfig
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Emulated PTP clock drivers configuration
+#
+
+menu "Emulated PTP clock drivers"
+
+config PTP_1588_CLOCK_KVM
+	tristate "KVM virtual PTP clock"
+	depends on PTP_1588_CLOCK
+	depends on (KVM_GUEST && X86) || (HAVE_ARM_SMCCC_DISCOVERY && ARM_ARCH_TIMER)
+	default y
+	help
+	  This driver adds support for using kvm infrastructure as a PTP
+	  clock. This clock is only useful if you are using KVM guests.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ptp_kvm.
+
+config PTP_1588_CLOCK_VMCLOCK
+	tristate "Virtual machine PTP clock"
+	depends on X86_TSC || ARM_ARCH_TIMER
+	depends on PTP_1588_CLOCK && ARCH_SUPPORTS_INT128
+	default PTP_1588_CLOCK_KVM
+	help
+	  This driver adds support for using a virtual precision clock
+	  advertised by the hypervisor. This clock is only useful in virtual
+	  machines where such a device is present.
+
+	  Unlike the KVM virtual PTP clock, the VMCLOCK device offers support
+	  for reliable timekeeping even across live migration. So this driver
+	  is enabled by default whenever the KVM PTP clock is.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ptp_vmclock.
+
+config PTP_1588_CLOCK_VMW
+	tristate "VMware virtual PTP clock"
+	depends on ACPI && HYPERVISOR_GUEST && X86
+	depends on PTP_1588_CLOCK
+	help
+	  This driver adds support for using VMware virtual precision
+	  clock device as a PTP clock. This is only useful in virtual
+	  machines running on VMware virtual infrastructure.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ptp_vmw.
+
+config PTP_S390
+	tristate "S390 PTP driver"
+	depends on PTP_1588_CLOCK
+	depends on S390
+	help
+	  This driver adds support for S390 time steering via the PtP
+	  interface. This works by adding a in-kernel clock delta value,
+	  which is always added to time values used in the kernel. The PtP
+	  driver provides the raw clock value without the delta to
+	  userspace. That way userspace programs like chrony could steer
+	  the kernel clock.
+
+endmenu
diff --git a/drivers/ptp/emulated/Makefile b/drivers/ptp/emulated/Makefile
new file mode 100644
index 000000000000..577917df3dc9
--- /dev/null
+++ b/drivers/ptp/emulated/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for emulated PTP clocks.
+#
+
+ptp_kvm-$(CONFIG_X86)			:= ptp_kvm_x86.o ptp_kvm_common.o
+ptp_kvm-$(CONFIG_HAVE_ARM_SMCCC)	:= ptp_kvm_arm.o ptp_kvm_common.o
+obj-$(CONFIG_PTP_1588_CLOCK_KVM)	+= ptp_kvm.o
+obj-$(CONFIG_PTP_1588_CLOCK_VMCLOCK)	+= ptp_vmclock.o
+obj-$(CONFIG_PTP_1588_CLOCK_VMW)	+= ptp_vmw.o
+obj-$(CONFIG_PTP_S390)			+= ptp_s390.o
diff --git a/drivers/ptp/ptp_kvm_arm.c b/drivers/ptp/emulated/ptp_kvm_arm.c
similarity index 100%
rename from drivers/ptp/ptp_kvm_arm.c
rename to drivers/ptp/emulated/ptp_kvm_arm.c
diff --git a/drivers/ptp/ptp_kvm_common.c b/drivers/ptp/emulated/ptp_kvm_common.c
similarity index 100%
rename from drivers/ptp/ptp_kvm_common.c
rename to drivers/ptp/emulated/ptp_kvm_common.c
diff --git a/drivers/ptp/ptp_kvm_x86.c b/drivers/ptp/emulated/ptp_kvm_x86.c
similarity index 100%
rename from drivers/ptp/ptp_kvm_x86.c
rename to drivers/ptp/emulated/ptp_kvm_x86.c
diff --git a/drivers/ptp/ptp_s390.c b/drivers/ptp/emulated/ptp_s390.c
similarity index 100%
rename from drivers/ptp/ptp_s390.c
rename to drivers/ptp/emulated/ptp_s390.c
diff --git a/drivers/ptp/ptp_vmclock.c b/drivers/ptp/emulated/ptp_vmclock.c
similarity index 100%
rename from drivers/ptp/ptp_vmclock.c
rename to drivers/ptp/emulated/ptp_vmclock.c
diff --git a/drivers/ptp/ptp_vmw.c b/drivers/ptp/emulated/ptp_vmw.c
similarity index 100%
rename from drivers/ptp/ptp_vmw.c
rename to drivers/ptp/emulated/ptp_vmw.c
-- 
2.43.5