All resources that the driver needs have managed API now. Switch to
using them to make code clearer and drop ti_ads7950_remove().

Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 drivers/iio/adc/ti-ads7950.c | 70 ++++++++++++++------------------------------
 1 file changed, 22 insertions(+), 48 deletions(-)

diff --git a/drivers/iio/adc/ti-ads7950.c b/drivers/iio/adc/ti-ads7950.c
index 0b98c8e7385d..882b280d9e0b 100644
--- a/drivers/iio/adc/ti-ads7950.c
+++ b/drivers/iio/adc/ti-ads7950.c
@@ -506,10 +506,8 @@ static int ti_ads7950_probe(struct spi_device *spi)
 	spi->bits_per_word = 16;
 	spi->mode |= SPI_CS_WORD;
 	ret = spi_setup(spi);
-	if (ret) {
-		dev_err(&spi->dev, "Error in spi setup\n");
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(&spi->dev, ret, "Error in spi setup\n");
 
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
 	if (!indio_dev)
@@ -517,8 +515,6 @@ static int ti_ads7950_probe(struct spi_device *spi)
 
 	st = iio_priv(indio_dev);
 
-	spi_set_drvdata(spi, indio_dev);
-
 	st->spi = spi;
 
 	info = spi_get_device_match_data(spi);
@@ -559,7 +555,9 @@ static int ti_ads7950_probe(struct spi_device *spi)
 	spi_message_init_with_transfers(&st->scan_single_msg,
 					st->scan_single_xfer, 3);
 
-	mutex_init(&st->slock);
+	ret = devm_mutex_init(&spi->dev, &st->slock);
+	if (ret)
+		return ret;
 
 	/* Use hard coded value for reference voltage in ACPI case */
 	if (ACPI_COMPANION(&spi->dev)) {
@@ -573,24 +571,22 @@ static int ti_ads7950_probe(struct spi_device *spi)
 		st->vref_mv = ret / 1000;
 	}
 
-	ret = iio_triggered_buffer_setup(indio_dev, NULL,
-					 &ti_ads7950_trigger_handler, NULL);
-	if (ret) {
-		dev_err(&spi->dev, "Failed to setup triggered buffer\n");
-		goto error_destroy_mutex;
-	}
+	ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, NULL,
+					      &ti_ads7950_trigger_handler,
+					      NULL);
+	if (ret)
+		return dev_err_probe(&spi->dev, ret,
+				     "Failed to setup triggered buffer\n");
 
 	ret = ti_ads7950_init_hw(st);
-	if (ret) {
-		dev_err(&spi->dev, "Failed to init adc chip\n");
-		goto error_cleanup_ring;
-	}
+	if (ret)
+		return dev_err_probe(&spi->dev, ret,
+				     "Failed to init adc chip\n");
 
-	ret = iio_device_register(indio_dev);
-	if (ret) {
-		dev_err(&spi->dev, "Failed to register iio device\n");
-		goto error_cleanup_ring;
-	}
+	ret = devm_iio_device_register(&spi->dev, indio_dev);
+	if (ret)
+		return dev_err_probe(&spi->dev, ret,
+				     "Failed to register iio device\n");
 
 	/* Add GPIO chip */
 	st->chip.label = dev_name(&st->spi->dev);
@@ -605,33 +601,12 @@ static int ti_ads7950_probe(struct spi_device *spi)
 	st->chip.get = ti_ads7950_get;
 	st->chip.set = ti_ads7950_set;
 
-	ret = gpiochip_add_data(&st->chip, st);
-	if (ret) {
-		dev_err(&spi->dev, "Failed to init GPIOs\n");
-		goto error_iio_device;
-	}
+	ret = devm_gpiochip_add_data(&spi->dev, &st->chip, st);
+	if (ret)
+		return dev_err_probe(&spi->dev, ret,
+				     "Failed to init GPIOs\n");
 
 	return 0;
-
-error_iio_device:
-	iio_device_unregister(indio_dev);
-error_cleanup_ring:
-	iio_triggered_buffer_cleanup(indio_dev);
-error_destroy_mutex:
-	mutex_destroy(&st->slock);
-
-	return ret;
-}
-
-static void ti_ads7950_remove(struct spi_device *spi)
-{
-	struct iio_dev *indio_dev = spi_get_drvdata(spi);
-	struct ti_ads7950_state *st = iio_priv(indio_dev);
-
-	gpiochip_remove(&st->chip);
-	iio_device_unregister(indio_dev);
-	iio_triggered_buffer_cleanup(indio_dev);
-	mutex_destroy(&st->slock);
 }
 
 static const struct spi_device_id ti_ads7950_id[] = {
@@ -674,7 +649,6 @@ static struct spi_driver ti_ads7950_driver = {
 		.of_match_table = ads7950_of_table,
 	},
 	.probe		= ti_ads7950_probe,
-	.remove		= ti_ads7950_remove,
 	.id_table	= ti_ads7950_id,
 };
 module_spi_driver(ti_ads7950_driver);

-- 
2.53.0.1213.gd9a14994de-goog