From: Florin Leotescu <florin.leotescu@nxp.com>

The EMC2305 fan controller supports multiple independent PWM fan
outputs. Some systems require fans to enter a defined safe state
during system shutdown or reboot handoff, until firmware or the next
boot stage reconfigures the controller.

Add an optional "fan-shutdown-percent" property to fan child nodes
allowing the PWM duty cycle applied during shutdown to be configured
per fan output.

Signed-off-by: Florin Leotescu <florin.leotescu@nxp.com>
---
 .../devicetree/bindings/hwmon/microchip,emc2305.yaml      | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/microchip,emc2305.yaml b/Documentation/devicetree/bindings/hwmon/microchip,emc2305.yaml
index d3f06ebc19fa..8c2548539d7f 100644
--- a/Documentation/devicetree/bindings/hwmon/microchip,emc2305.yaml
+++ b/Documentation/devicetree/bindings/hwmon/microchip,emc2305.yaml
@@ -54,6 +54,12 @@ patternProperties:
           The fan number used to determine the associated PWM channel.
         maxItems: 1
 
+      fan-shutdown-percent:
+        description:
+          PWM duty cycle in percent applied to the fan during shutdown.
+        minimum: 0
+        maximum: 100
+
     required:
       - reg
 
@@ -80,12 +86,14 @@ examples:
             fan@0 {
                 reg = <0x0>;
                 pwms = <&fan_controller 26000 PWM_POLARITY_INVERTED 1>;
+                fan-shutdown-percent = <100>;
                 #cooling-cells = <2>;
             };
 
             fan@1 {
                 reg = <0x1>;
                 pwms = <&fan_controller 26000 0 1>;
+                fan-shutdown-percent = <50>;
                 #cooling-cells = <2>;
             };
 
-- 
2.34.1