From: Angela Czubak <acz@semihalf.com>
Detect SPI HID devices described in ACPI.
Signed-off-by: Angela Czubak <acz@semihalf.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jingyuan Liang <jingyliang@chromium.org>
---
drivers/hid/spi-hid/Kconfig | 15 +++
drivers/hid/spi-hid/Makefile | 1 +
drivers/hid/spi-hid/spi-hid-acpi.c | 253 +++++++++++++++++++++++++++++++++++++
drivers/hid/spi-hid/spi-hid-core.c | 26 +---
drivers/hid/spi-hid/spi-hid.h | 45 +++++++
5 files changed, 315 insertions(+), 25 deletions(-)
diff --git a/drivers/hid/spi-hid/Kconfig b/drivers/hid/spi-hid/Kconfig
index 836fdefe8345..114b1e00da39 100644
--- a/drivers/hid/spi-hid/Kconfig
+++ b/drivers/hid/spi-hid/Kconfig
@@ -10,6 +10,21 @@ menuconfig SPI_HID
if SPI_HID
+config SPI_HID_ACPI
+ tristate "HID over SPI transport layer ACPI driver"
+ depends on ACPI
+ select SPI_HID_CORE
+ help
+ Say Y here if you use a keyboard, a touchpad, a touchscreen, or any
+ other HID based devices which are connected to your computer via SPI.
+ This driver supports ACPI-based systems.
+
+ If unsure, say N.
+
+ This support is also available as a module. If so, the module
+ will be called spi-hid-acpi. It will also build/depend on the
+ module spi-hid.
+
config SPI_HID_CORE
tristate
endif
diff --git a/drivers/hid/spi-hid/Makefile b/drivers/hid/spi-hid/Makefile
index 733e006df56e..3ca326602643 100644
--- a/drivers/hid/spi-hid/Makefile
+++ b/drivers/hid/spi-hid/Makefile
@@ -8,3 +8,4 @@
obj-$(CONFIG_SPI_HID_CORE) += spi-hid.o
spi-hid-objs = spi-hid-core.o
CFLAGS_spi-hid-core.o := -I$(src)
+obj-$(CONFIG_SPI_HID_ACPI) += spi-hid-acpi.o
diff --git a/drivers/hid/spi-hid/spi-hid-acpi.c b/drivers/hid/spi-hid/spi-hid-acpi.c
new file mode 100644
index 000000000000..298e3ba44d8a
--- /dev/null
+++ b/drivers/hid/spi-hid/spi-hid-acpi.c
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * HID over SPI protocol, ACPI related code
+ *
+ * Copyright (c) 2021 Microsoft Corporation
+ * Copyright (c) 2026 Google LLC
+ *
+ * This code was forked out of the HID over SPI core code, which is partially
+ * based on "HID over I2C protocol implementation:
+ *
+ * Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@gmail.com>
+ * Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France
+ * Copyright (c) 2012 Red Hat, Inc
+ *
+ * which in turn is partially based on "USB HID support for Linux":
+ *
+ * Copyright (c) 1999 Andreas Gal
+ * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
+ * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
+ * Copyright (c) 2007-2008 Oliver Neukum
+ * Copyright (c) 2006-2010 Jiri Kosina
+ */
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/reset.h>
+#include <linux/uuid.h>
+
+#include "spi-hid.h"
+
+/* Config structure is filled with data from ACPI */
+struct spi_hid_acpi_config {
+ struct spihid_ops ops;
+
+ struct spi_hid_conf property_conf;
+ u32 post_power_on_delay_ms;
+ u32 minimal_reset_delay_ms;
+ struct acpi_device *adev;
+};
+
+/* HID SPI Device: 6e2ac436-0fcf41af-a265-b32a220dcfab */
+static guid_t spi_hid_guid =
+ GUID_INIT(0x6E2AC436, 0x0FCF, 0x41AF,
+ 0xA2, 0x65, 0xB3, 0x2A, 0x22, 0x0D, 0xCF, 0xAB);
+
+static int spi_hid_acpi_populate_config(struct spi_hid_acpi_config *conf,
+ struct acpi_device *adev)
+{
+ acpi_handle handle = acpi_device_handle(adev);
+ union acpi_object *obj;
+
+ conf->adev = adev;
+
+ /* Revision 3 for HID over SPI V1, see specification. */
+ obj = acpi_evaluate_dsm_typed(handle, &spi_hid_guid, 3, 1, NULL,
+ ACPI_TYPE_INTEGER);
+ if (!obj) {
+ acpi_handle_err(handle,
+ "Error _DSM call to get HID input report header address failed");
+ return -ENODEV;
+ }
+ conf->property_conf.input_report_header_address = obj->integer.value;
+ ACPI_FREE(obj);
+
+ obj = acpi_evaluate_dsm_typed(handle, &spi_hid_guid, 3, 2, NULL,
+ ACPI_TYPE_INTEGER);
+ if (!obj) {
+ acpi_handle_err(handle,
+ "Error _DSM call to get HID input report body address failed");
+ return -ENODEV;
+ }
+ conf->property_conf.input_report_body_address = obj->integer.value;
+ ACPI_FREE(obj);
+
+ obj = acpi_evaluate_dsm_typed(handle, &spi_hid_guid, 3, 3, NULL,
+ ACPI_TYPE_INTEGER);
+ if (!obj) {
+ acpi_handle_err(handle,
+ "Error _DSM call to get HID output report header address failed");
+ return -ENODEV;
+ }
+ conf->property_conf.output_report_address = obj->integer.value;
+ ACPI_FREE(obj);
+
+ obj = acpi_evaluate_dsm_typed(handle, &spi_hid_guid, 3, 4, NULL,
+ ACPI_TYPE_BUFFER);
+ if (!obj) {
+ acpi_handle_err(handle,
+ "Error _DSM call to get HID read opcode failed");
+ return -ENODEV;
+ }
+ if (obj->buffer.length == 1) {
+ conf->property_conf.read_opcode = obj->buffer.pointer[0];
+ } else {
+ acpi_handle_err(handle,
+ "Error _DSM call to get HID read opcode, too long buffer");
+ ACPI_FREE(obj);
+ return -ENODEV;
+ }
+ ACPI_FREE(obj);
+
+ obj = acpi_evaluate_dsm_typed(handle, &spi_hid_guid, 3, 5, NULL,
+ ACPI_TYPE_BUFFER);
+ if (!obj) {
+ acpi_handle_err(handle,
+ "Error _DSM call to get HID write opcode failed");
+ return -ENODEV;
+ }
+ if (obj->buffer.length == 1) {
+ conf->property_conf.write_opcode = obj->buffer.pointer[0];
+ } else {
+ acpi_handle_err(handle,
+ "Error _DSM call to get HID write opcode, too long buffer");
+ ACPI_FREE(obj);
+ return -ENODEV;
+ }
+ ACPI_FREE(obj);
+
+ /* Value not provided in ACPI,*/
+ conf->post_power_on_delay_ms = 5;
+ conf->minimal_reset_delay_ms = 150;
+
+ if (!acpi_has_method(handle, "_RST")) {
+ acpi_handle_err(handle, "No reset method for acpi handle");
+ return -EINVAL;
+ }
+
+ /* FIXME: not reading hid-over-spi-flags, multi-SPI not supported */
+
+ return 0;
+}
+
+static int spi_hid_acpi_power_none(struct spihid_ops *ops)
+{
+ return 0;
+}
+
+static int spi_hid_acpi_power_down(struct spihid_ops *ops)
+{
+ struct spi_hid_acpi_config *conf = container_of(ops,
+ struct spi_hid_acpi_config,
+ ops);
+
+ return acpi_device_set_power(conf->adev, ACPI_STATE_D3);
+}
+
+static int spi_hid_acpi_power_up(struct spihid_ops *ops)
+{
+ struct spi_hid_acpi_config *conf = container_of(ops,
+ struct spi_hid_acpi_config,
+ ops);
+ int error;
+
+ error = acpi_device_set_power(conf->adev, ACPI_STATE_D0);
+ if (error) {
+ dev_err(&conf->adev->dev, "Error could not power up ACPI device: %d.", error);
+ return error;
+ }
+
+ if (conf->post_power_on_delay_ms)
+ msleep(conf->post_power_on_delay_ms);
+
+ return 0;
+}
+
+static int spi_hid_acpi_assert_reset(struct spihid_ops *ops)
+{
+ return 0;
+}
+
+static int spi_hid_acpi_deassert_reset(struct spihid_ops *ops)
+{
+ struct spi_hid_acpi_config *conf = container_of(ops,
+ struct spi_hid_acpi_config,
+ ops);
+
+ return device_reset(&conf->adev->dev);
+}
+
+static void spi_hid_acpi_sleep_minimal_reset_delay(struct spihid_ops *ops)
+{
+ struct spi_hid_acpi_config *conf = container_of(ops,
+ struct spi_hid_acpi_config,
+ ops);
+ fsleep(1000 * conf->minimal_reset_delay_ms);
+}
+
+static int spi_hid_acpi_probe(struct spi_device *spi)
+{
+ struct device *dev = &spi->dev;
+ struct acpi_device *adev;
+ struct spi_hid_acpi_config *config;
+ int error;
+
+ adev = ACPI_COMPANION(dev);
+ if (!adev) {
+ dev_err(dev, "Error could not get ACPI device.");
+ return -ENODEV;
+ }
+
+ config = devm_kzalloc(dev, sizeof(struct spi_hid_acpi_config),
+ GFP_KERNEL);
+ if (!config)
+ return -ENOMEM;
+
+ if (acpi_device_power_manageable(adev)) {
+ config->ops.power_up = spi_hid_acpi_power_up;
+ config->ops.power_down = spi_hid_acpi_power_down;
+ } else {
+ config->ops.power_up = spi_hid_acpi_power_none;
+ config->ops.power_down = spi_hid_acpi_power_none;
+ }
+ config->ops.assert_reset = spi_hid_acpi_assert_reset;
+ config->ops.deassert_reset = spi_hid_acpi_deassert_reset;
+ config->ops.sleep_minimal_reset_delay =
+ spi_hid_acpi_sleep_minimal_reset_delay;
+
+ error = spi_hid_acpi_populate_config(config, adev);
+ if (error) {
+ dev_err(dev, "%s: unable to populate config data.", __func__);
+ return error;
+ }
+
+ return spi_hid_core_probe(spi, &config->ops, &config->property_conf);
+}
+
+static const struct acpi_device_id spi_hid_acpi_match[] = {
+ { "ACPI0C51", 0 },
+ { "PNP0C51", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, spi_hid_acpi_match);
+
+static struct spi_driver spi_hid_acpi_driver = {
+ .driver = {
+ .name = "spi_hid_acpi",
+ .owner = THIS_MODULE,
+ .acpi_match_table = spi_hid_acpi_match,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ .dev_groups = spi_hid_groups,
+ },
+ .probe = spi_hid_acpi_probe,
+ .remove = spi_hid_core_remove,
+};
+
+module_spi_driver(spi_hid_acpi_driver);
+
+MODULE_DESCRIPTION("HID over SPI ACPI transport driver");
+MODULE_AUTHOR("Angela Czubak <aczubak@google.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hid/spi-hid/spi-hid-core.c b/drivers/hid/spi-hid/spi-hid-core.c
index 802615565541..d48175c764b9 100644
--- a/drivers/hid/spi-hid/spi-hid-core.c
+++ b/drivers/hid/spi-hid/spi-hid-core.c
@@ -43,6 +43,7 @@
#include <linux/wait.h>
#include <linux/workqueue.h>
+#include "spi-hid.h"
#include "spi-hid-core.h"
#define CREATE_TRACE_POINTS
@@ -110,31 +111,6 @@ struct spi_hid_output_report {
u8 *content;
};
-/* struct spi_hid_conf - Conf provided to the core */
-struct spi_hid_conf {
- u32 input_report_header_address;
- u32 input_report_body_address;
- u32 output_report_address;
- u8 read_opcode;
- u8 write_opcode;
-};
-
-/**
- * struct spihid_ops - Ops provided to the core
- * @power_up: do sequencing to power up the device
- * @power_down: do sequencing to power down the device
- * @assert_reset: do sequencing to assert the reset line
- * @deassert_reset: do sequencing to deassert the reset line
- * @sleep_minimal_reset_delay: minimal sleep delay during reset
- */
-struct spihid_ops {
- int (*power_up)(struct spihid_ops *ops);
- int (*power_down)(struct spihid_ops *ops);
- int (*assert_reset)(struct spihid_ops *ops);
- int (*deassert_reset)(struct spihid_ops *ops);
- void (*sleep_minimal_reset_delay)(struct spihid_ops *ops);
-};
-
static struct hid_ll_driver spi_hid_ll_driver;
static void spi_hid_populate_read_approvals(const struct spi_hid_conf *conf,
diff --git a/drivers/hid/spi-hid/spi-hid.h b/drivers/hid/spi-hid/spi-hid.h
new file mode 100644
index 000000000000..f5a5f4d54beb
--- /dev/null
+++ b/drivers/hid/spi-hid/spi-hid.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2021 Microsoft Corporation
+ * Copyright (c) 2026 Google LLC
+ */
+
+#ifndef SPI_HID_H
+#define SPI_HID_H
+
+#include <linux/spi/spi.h>
+#include <linux/sysfs.h>
+
+/* struct spi_hid_conf - Conf provided to the core */
+struct spi_hid_conf {
+ u32 input_report_header_address;
+ u32 input_report_body_address;
+ u32 output_report_address;
+ u8 read_opcode;
+ u8 write_opcode;
+};
+
+/**
+ * struct spihid_ops - Ops provided to the core
+ * @power_up: do sequencing to power up the device
+ * @power_down: do sequencing to power down the device
+ * @assert_reset: do sequencing to assert the reset line
+ * @deassert_reset: do sequencing to deassert the reset line
+ * @sleep_minimal_reset_delay: minimal sleep delay during reset
+ */
+struct spihid_ops {
+ int (*power_up)(struct spihid_ops *ops);
+ int (*power_down)(struct spihid_ops *ops);
+ int (*assert_reset)(struct spihid_ops *ops);
+ int (*deassert_reset)(struct spihid_ops *ops);
+ void (*sleep_minimal_reset_delay)(struct spihid_ops *ops);
+};
+
+int spi_hid_core_probe(struct spi_device *spi, struct spihid_ops *ops,
+ struct spi_hid_conf *conf);
+
+void spi_hid_core_remove(struct spi_device *spi);
+
+extern const struct attribute_group *spi_hid_groups[];
+
+#endif /* SPI_HID_H */
--
2.53.0.1185.g05d4b7b318-goog© 2016 - 2026 Red Hat, Inc.