From: Angela Czubak <acz@semihalf.com>
Create spi-hid folder and add Kconfig and Makefile for spi-hid driver.
Add basic device structure, definitions, and probe/remove functions.
Signed-off-by: Dmitry Antipov <dmanti@microsoft.com>
Signed-off-by: Angela Czubak <acz@semihalf.com>
Signed-off-by: Jingyuan Liang <jingyliang@chromium.org>
---
drivers/hid/Kconfig | 2 +
drivers/hid/Makefile | 2 +
drivers/hid/spi-hid/Kconfig | 15 +++
drivers/hid/spi-hid/Makefile | 9 ++
drivers/hid/spi-hid/spi-hid-core.c | 213 +++++++++++++++++++++++++++++++++++++
5 files changed, 241 insertions(+)
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 920a64b66b25..c6ae23bfb75d 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -1434,6 +1434,8 @@ source "drivers/hid/bpf/Kconfig"
source "drivers/hid/i2c-hid/Kconfig"
+source "drivers/hid/spi-hid/Kconfig"
+
source "drivers/hid/intel-ish-hid/Kconfig"
source "drivers/hid/amd-sfh-hid/Kconfig"
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 361a7daedeb8..6b43e789b39a 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -169,6 +169,8 @@ obj-$(CONFIG_USB_KBD) += usbhid/
obj-$(CONFIG_I2C_HID_CORE) += i2c-hid/
+obj-$(CONFIG_SPI_HID_CORE) += spi-hid/
+
obj-$(CONFIG_INTEL_ISH_HID) += intel-ish-hid/
obj-$(CONFIG_AMD_SFH_HID) += amd-sfh-hid/
diff --git a/drivers/hid/spi-hid/Kconfig b/drivers/hid/spi-hid/Kconfig
new file mode 100644
index 000000000000..836fdefe8345
--- /dev/null
+++ b/drivers/hid/spi-hid/Kconfig
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (c) 2021 Microsoft Corporation
+#
+
+menuconfig SPI_HID
+ tristate "SPI HID support"
+ default y
+ depends on SPI
+
+if SPI_HID
+
+config SPI_HID_CORE
+ tristate
+endif
diff --git a/drivers/hid/spi-hid/Makefile b/drivers/hid/spi-hid/Makefile
new file mode 100644
index 000000000000..92e24cddbfc2
--- /dev/null
+++ b/drivers/hid/spi-hid/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the SPI HID input drivers
+#
+# Copyright (c) 2021 Microsoft Corporation
+#
+
+obj-$(CONFIG_SPI_HID_CORE) += spi-hid.o
+spi-hid-objs = spi-hid-core.o
diff --git a/drivers/hid/spi-hid/spi-hid-core.c b/drivers/hid/spi-hid/spi-hid-core.c
new file mode 100644
index 000000000000..d7b4d4adad95
--- /dev/null
+++ b/drivers/hid/spi-hid/spi-hid-core.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * HID over SPI protocol implementation
+ *
+ * Copyright (c) 2021 Microsoft Corporation
+ * Copyright (c) 2026 Google LLC
+ *
+ * This code is partly based on "HID over I2C protocol implementation:
+ *
+ * Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@gmail.com>
+ * Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France
+ * Copyright (c) 2012 Red Hat, Inc
+ *
+ * which in turn is partly based on "USB HID support for Linux":
+ *
+ * Copyright (c) 1999 Andreas Gal
+ * Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
+ * Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
+ * Copyright (c) 2007-2008 Oliver Neukum
+ * Copyright (c) 2006-2010 Jiri Kosina
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/hid-over-spi.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+
+/* struct spi_hid_conf - Conf provided to the core */
+struct spi_hid_conf {
+ u32 input_report_header_address;
+ u32 input_report_body_address;
+ u32 output_report_address;
+ u8 read_opcode;
+ u8 write_opcode;
+};
+
+/**
+ * struct spihid_ops - Ops provided to the core
+ * @power_up: do sequencing to power up the device
+ * @power_down: do sequencing to power down the device
+ * @assert_reset: do sequencing to assert the reset line
+ * @deassert_reset: do sequencing to deassert the reset line
+ * @sleep_minimal_reset_delay: minimal sleep delay during reset
+ */
+struct spihid_ops {
+ int (*power_up)(struct spihid_ops *ops);
+ int (*power_down)(struct spihid_ops *ops);
+ int (*assert_reset)(struct spihid_ops *ops);
+ int (*deassert_reset)(struct spihid_ops *ops);
+ void (*sleep_minimal_reset_delay)(struct spihid_ops *ops);
+};
+
+/* Driver context */
+struct spi_hid {
+ struct spi_device *spi; /* spi device. */
+ struct hid_device *hid; /* pointer to corresponding HID dev. */
+
+ struct spihid_ops *ops;
+ struct spi_hid_conf *conf;
+
+ enum hidspi_power_state power_state;
+
+ u32 regulator_error_count;
+ int regulator_last_error;
+ u32 bus_error_count;
+ int bus_last_error;
+ u32 dir_count; /* device initiated reset count. */
+};
+
+static const char *spi_hid_power_mode_string(enum hidspi_power_state power_state)
+{
+ switch (power_state) {
+ case HIDSPI_ON:
+ return "d0";
+ case HIDSPI_SLEEP:
+ return "d2";
+ case HIDSPI_OFF:
+ return "d3";
+ default:
+ return "unknown";
+ }
+}
+
+static irqreturn_t spi_hid_dev_irq(int irq, void *_shid)
+{
+ return IRQ_HANDLED;
+}
+
+static ssize_t bus_error_count_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct spi_hid *shid = dev_get_drvdata(dev);
+
+ return sysfs_emit(buf, "%d (%d)\n",
+ shid->bus_error_count, shid->bus_last_error);
+}
+static DEVICE_ATTR_RO(bus_error_count);
+
+static ssize_t regulator_error_count_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct spi_hid *shid = dev_get_drvdata(dev);
+
+ return sysfs_emit(buf, "%d (%d)\n",
+ shid->regulator_error_count,
+ shid->regulator_last_error);
+}
+static DEVICE_ATTR_RO(regulator_error_count);
+
+static ssize_t device_initiated_reset_count_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct spi_hid *shid = dev_get_drvdata(dev);
+
+ return sysfs_emit(buf, "%d\n", shid->dir_count);
+}
+static DEVICE_ATTR_RO(device_initiated_reset_count);
+
+static struct attribute *spi_hid_attrs[] = {
+ &dev_attr_bus_error_count.attr,
+ &dev_attr_regulator_error_count.attr,
+ &dev_attr_device_initiated_reset_count.attr,
+ NULL /* Terminator */
+};
+
+static const struct attribute_group spi_hid_group = {
+ .attrs = spi_hid_attrs,
+};
+
+const struct attribute_group *spi_hid_groups[] = {
+ &spi_hid_group,
+ NULL
+};
+EXPORT_SYMBOL_GPL(spi_hid_groups);
+
+int spi_hid_core_probe(struct spi_device *spi, struct spihid_ops *ops,
+ struct spi_hid_conf *conf)
+{
+ struct device *dev = &spi->dev;
+ struct spi_hid *shid;
+ int error;
+
+ if (spi->irq <= 0)
+ return dev_err_probe(dev, spi->irq ?: -EINVAL, "Missing IRQ\n");
+
+ shid = devm_kzalloc(dev, sizeof(*shid), GFP_KERNEL);
+ if (!shid)
+ return -ENOMEM;
+
+ shid->spi = spi;
+ shid->power_state = HIDSPI_ON;
+ shid->ops = ops;
+ shid->conf = conf;
+
+ spi_set_drvdata(spi, shid);
+
+ /*
+ * At the end of probe we initialize the device:
+ * 0) assert reset, bias the interrupt line
+ * 1) sleep minimal reset delay
+ * 2) request IRQ
+ * 3) power up the device
+ * 4) deassert reset (high)
+ * After this we expect an IRQ with a reset response.
+ */
+
+ shid->ops->assert_reset(shid->ops);
+
+ shid->ops->sleep_minimal_reset_delay(shid->ops);
+
+ error = devm_request_threaded_irq(dev, spi->irq, NULL, spi_hid_dev_irq,
+ IRQF_ONESHOT, dev_name(&spi->dev), shid);
+ if (error) {
+ dev_err(dev, "%s: unable to request threaded IRQ.", __func__);
+ return error;
+ }
+
+ error = shid->ops->power_up(shid->ops);
+ if (error) {
+ dev_err(dev, "%s: could not power up.", __func__);
+ return error;
+ }
+
+ shid->ops->deassert_reset(shid->ops);
+
+ dev_dbg(dev, "%s: d3 -> %s.", __func__,
+ spi_hid_power_mode_string(shid->power_state));
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(spi_hid_core_probe);
+
+void spi_hid_core_remove(struct spi_device *spi)
+{
+ struct spi_hid *shid = spi_get_drvdata(spi);
+ struct device *dev = &spi->dev;
+ int error;
+
+ shid->ops->assert_reset(shid->ops);
+ error = shid->ops->power_down(shid->ops);
+ if (error)
+ dev_err(dev, "failed to disable regulator.");
+}
+EXPORT_SYMBOL_GPL(spi_hid_core_remove);
+
+MODULE_DESCRIPTION("HID over SPI transport driver");
+MODULE_AUTHOR("Dmitry Antipov <dmanti@microsoft.com>");
+MODULE_LICENSE("GPL");
--
2.53.0.1185.g05d4b7b318-goog