The various snps,reset-* properties are deprecated, so convert them into
their replacements.

Signed-off-by: Diederik de Haas <diederik@cknow-tech.com>
---
 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
index 90ce6f0e1dcf..92d044ec696b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
@@ -85,10 +85,6 @@ &gmac0_tx_bus2
 		     &gmac0_rx_bus2
 		     &gmac0_rgmii_clk
 		     &gmac0_rgmii_bus>;
-	snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	/* Reset time is 15ms, 50ms for rtl8211f */
-	snps,reset-delays-us = <0 15000 50000>;
 	tx_delay = <0x3c>;
 	rx_delay = <0x2f>;
 	status = "okay";
@@ -100,6 +96,9 @@ rgmii_phy0: ethernet-phy@1 {
 		reg = <1>;
 		pinctrl-0 = <&gmac0_rstn_gpio0_c5_pin>;
 		pinctrl-names = "default";
+		reset-assert-us = <15000>;
+		reset-deassert-us = <50000>;
+		reset-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
 	};
 };
 
-- 
2.53.0