The HP Omen 16-n0xxx (board ID: 8A44) has the same WMI interface as
other Victus S boards, but requires additional quirks for correctly
switching thermal profile.
Create a new quirk omen_v1_legacy_thermal_params which allows a board to
use Omen V1 thermal values, but rely on the older legacy
HP_OMEN_EC_THERMAL_PROFILE_OFFSET. Add the DMI board name to
victus_s_thermal_profile_boards[] table and map it to the newly added
quirk.
Testing on board 8A44 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: Prasoon Dev <prasoon5050@outlook.com>
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
---
drivers/platform/x86/hp/hp-wmi.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/platform/x86/hp/hp-wmi.c b/drivers/platform/x86/hp/hp-wmi.c
index 24164f294420..3284cf0d74cb 100644
--- a/drivers/platform/x86/hp/hp-wmi.c
+++ b/drivers/platform/x86/hp/hp-wmi.c
@@ -121,6 +121,13 @@ static const struct thermal_profile_params omen_v1_thermal_params = {
.ec_tp_offset = HP_VICTUS_S_EC_THERMAL_PROFILE_OFFSET,
};
+static const struct thermal_profile_params omen_v1_legacy_thermal_params = {
+ .performance = HP_OMEN_V1_THERMAL_PROFILE_PERFORMANCE,
+ .balanced = HP_OMEN_V1_THERMAL_PROFILE_DEFAULT,
+ .low_power = HP_OMEN_V1_THERMAL_PROFILE_DEFAULT,
+ .ec_tp_offset = HP_OMEN_EC_THERMAL_PROFILE_OFFSET,
+};
+
static const struct thermal_profile_params omen_v1_no_ec_thermal_params = {
.performance = HP_OMEN_V1_THERMAL_PROFILE_PERFORMANCE,
.balanced = HP_OMEN_V1_THERMAL_PROFILE_DEFAULT,
@@ -181,6 +188,10 @@ static const char * const victus_thermal_profile_boards[] = {
/* DMI Board names of Victus 16-r and Victus 16-s laptops */
static const struct dmi_system_id victus_s_thermal_profile_boards[] __initconst = {
+ {
+ .matches = { DMI_MATCH(DMI_BOARD_NAME, "8A44") },
+ .driver_data = (void *)&omen_v1_legacy_thermal_params,
+ },
{
.matches = { DMI_MATCH(DMI_BOARD_NAME, "8BBE") },
.driver_data = (void *)&victus_s_thermal_params,
--
2.53.0