ALSA controls should return 1 if the value in the control changed but the
control put operation micfil_range_set() only returns 0 or a negative
error code, causing ALSA to not generate any change events.

Use snd_soc_component_update_bits() function to replace the
regmap_update_bits(), for snd_soc_component_update_bits() has the
capability of return check status.

Also enable pm runtime before calling the function
snd_soc_component_update_bits() to make the regmap cache data align with
the value in hardware.

Fixes: ef1a7e02fdb7 ("ASoC: fsl_micfil: Set channel range control")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
 sound/soc/fsl/fsl_micfil.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c
index 1c826e0cb1d5..0cfdd6343291 100644
--- a/sound/soc/fsl/fsl_micfil.c
+++ b/sound/soc/fsl/fsl_micfil.c
@@ -210,15 +210,23 @@ static int micfil_range_set(struct snd_kcontrol *kcontrol,
 		(struct soc_mixer_control *)kcontrol->private_value;
 	unsigned int shift = mc->shift;
 	int max_range, new_range;
+	int ret;
 
 	new_range = ucontrol->value.integer.value[0];
 	max_range = micfil_get_max_range(micfil);
 	if (new_range > max_range)
 		dev_warn(&micfil->pdev->dev, "range makes channel %d data unreliable\n", shift / 4);
 
-	regmap_update_bits(micfil->regmap, REG_MICFIL_OUT_CTRL, 0xF << shift, new_range << shift);
+	ret = pm_runtime_resume_and_get(cmpnt->dev);
+	if (ret)
+		return ret;
 
-	return 0;
+	ret = snd_soc_component_update_bits(cmpnt, REG_MICFIL_OUT_CTRL, 0xF << shift,
+					    new_range << shift);
+
+	pm_runtime_put_autosuspend(cmpnt->dev);
+
+	return ret;
 }
 
 static int micfil_set_quality(struct fsl_micfil *micfil)
-- 
2.34.1