The MSM HDMI PHYs have been using the ad-hoc approach / API instead of
using the generic API framework. Move MSM HDMI PHY drivers to
drivers/phy/qualcomm and rework them to use generic PHY framework. This
way all the QMP-related code is kept at the same place.
Also MSM8974 HDMI PHY, 28nm DSI PHY and apq8964 SATA PHY now can use
common helpers for the UNI PLL.

This also causes some design changes. Currently on MSM8996 the HDMI PLL
implements clock's set_rate(), while other HDMI PHY drivers used the
ad-hoc PHY API for setting the PLL rate (this includes in-tree MSM8960
driver and posted, but not merged, MSM8974 driver). This might result in
the PLL being set to one rate, while the rest of the PHY being tuned to
work at another rate. Adopt the latter idea and always use
phy_configure() to tune the PHY and set the PLL rate.

Merge strategy: Merge the first patch (either through drm/msm or through
the PHY tree), merge the rest of the patches in the next cycle.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
Changes in v8:
- Rebased on linux-next, fixing conflicts
- Added missing ids for APQ8084 and MSM8998 (Sashiko)
- Switched to pm_runtime_put() (Sashiko)
- Fixed several missed *1000 after pixclk -> tmds_char_rate conversion
  (Sashiko)
- Fixed several math overflows (Sashiko)
- Link to v7: https://patch.msgid.link/20260324-fd-hdmi-phy-v7-0-b41dde8d83b8@oss.qualcomm.com

Changes in v7:
- Fixed the build issue between msm8974 patches.
- Dropped even more writel / readl wrappers (now from QMP PHYs)
- Link to v6: https://lore.kernel.org/r/20260319-fd-hdmi-phy-v6-0-cefc08a55470@oss.qualcomm.com

Changes in v6:
- Changed MSM8974 HDMI PHY driver to use FIELD_PREP / FIELD_GET (Konrad)
- Fixed rate recalculation for MSM8974 HDMI PHY (Konrad)
- Dropped register read/write wrappers
- Link to v5: https://lore.kernel.org/r/20260314-fd-hdmi-phy-v5-0-58122ae96d3b@oss.qualcomm.com

Changes in v5:
- Kept only a single place which handles extp clk (after PHY power on,
  before PHY power off) (Neil)
- Inlined pm_runtime calls in the HDMI TX driver, replaced
  pm_runtime_resume_and_get() with pm_runtime_get_sync(), since
  atomic_pre_enable() can not fail.
- Renamed registers defines to drop the REG_ prefix.
- Link to v4: https://lore.kernel.org/r/20250520-fd-hdmi-phy-v4-0-fcbaa652ad75@oss.qualcomm.com

Changes in v3-v4:
- Rebased on top of linux-next, solving conflicts
- Squashed add-and-remove patches into a single git mv patch
- Dropped HDMI PHY header patch (merged upstream)

Changes in v2:
- Changed msm8960 / apq8064 to calculate register data instead of using
  fixed tables. This extends the list of supported modes.
  (Implementation is based on mdss-hdmi-pll-28lpm.c from msm-4.14).

- Fixed the reprogramming of PLL rate on apq8064.

- Merged all non-QMP HDMI PHY drivers into a common PHY_QCOM_HDMI
  driver (suggested by Rob Clark)

---
Dmitry Baryshkov (4):
      drm/msm/hdmi: switch to generic PHY subsystem
      phy: qcom: apq8064-sata: extract UNI PLL register defines
      phy: qcom-uniphy: add more registers from display PHYs
      phy: qualcomm: add MSM8974 HDMI PHY support

 drivers/gpu/drm/msm/Makefile                     |   7 -
 drivers/gpu/drm/msm/hdmi/hdmi.c                  |  59 +-
 drivers/gpu/drm/msm/hdmi/hdmi.h                  |  80 +--
 drivers/gpu/drm/msm/hdmi/hdmi_bridge.c           |  80 ++-
 drivers/gpu/drm/msm/hdmi/hdmi_phy.c              | 226 -------
 drivers/gpu/drm/msm/hdmi/hdmi_phy_8960.c         |  51 --
 drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c         | 761 ----------------------
 drivers/gpu/drm/msm/hdmi/hdmi_phy_8998.c         | 765 -----------------------
 drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c         | 141 -----
 drivers/gpu/drm/msm/hdmi/hdmi_phy_8x74.c         |  44 --
 drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c         | 460 --------------
 drivers/gpu/drm/msm/registers/display/hdmi.xml   | 537 ----------------
 drivers/phy/qualcomm/Kconfig                     |  24 +
 drivers/phy/qualcomm/Makefile                    |  14 +
 drivers/phy/qualcomm/phy-qcom-apq8064-sata.c     |  23 +-
 drivers/phy/qualcomm/phy-qcom-hdmi-28hpm.c       | 353 +++++++++++
 drivers/phy/qualcomm/phy-qcom-hdmi-28lpm.c       | 478 ++++++++++++++
 drivers/phy/qualcomm/phy-qcom-hdmi-45nm.c        | 186 ++++++
 drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.c      | 213 +++++++
 drivers/phy/qualcomm/phy-qcom-hdmi-preqmp.h      |  59 ++
 drivers/phy/qualcomm/phy-qcom-qmp-hdmi-base.c    | 187 ++++++
 drivers/phy/qualcomm/phy-qcom-qmp-hdmi-msm8996.c | 440 +++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp-hdmi-msm8998.c | 489 +++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp-hdmi.h         |  49 ++
 drivers/phy/qualcomm/phy-qcom-uniphy.h           |  74 +++
 25 files changed, 2611 insertions(+), 3189 deletions(-)
---
base-commit: d894dddf2a144f0e1d1cd7a8225c744dc906cdd5
change-id: 20240109-fd-hdmi-phy-44b8319fbcc7

Best regards,
--  
With best wishes
Dmitry