From: Rudraksha Gupta <guptarud@gmail.com>

Add the I2C controller node for GSBI5 (gpio24/gpio25) alongside
its pinctrl default and sleep states.

Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
---
 arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 35 ++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index fd28401cebb5..2088baef6c30 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -185,6 +185,24 @@ i2c3-pins {
 				};
 			};
 
+			i2c5_default_state: i2c5-default-state {
+				i2c5-pins {
+					pins = "gpio24", "gpio25";
+					function = "gsbi5";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			i2c5_sleep_state: i2c5-sleep-state {
+				i2c5-pins {
+					pins = "gpio24", "gpio25";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+			};
+
 			i2c7_default_state: i2c7-default-state {
 				i2c7-pins {
 					pins = "gpio32", "gpio33";
@@ -664,6 +682,23 @@ gsbi5_serial: serial@16440000 {
 
 				status = "disabled";
 			};
+
+			gsbi5_i2c: i2c@16480000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16480000 0x1000>;
+				pinctrl-0 = <&i2c5_default_state>;
+				pinctrl-1 = <&i2c5_sleep_state>;
+				pinctrl-names = "default", "sleep";
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI5_QUP_CLK>,
+					 <&gcc GSBI5_H_CLK>;
+				clock-names = "core",
+					      "iface";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+			};
 		};
 
 		gsbi7: gsbi@16600000 {

-- 
2.53.0

On 4/1/26 10:28 AM, Rudraksha Gupta via B4 Relay wrote:
> From: Rudraksha Gupta <guptarud@gmail.com>
> 
> Add the I2C controller node for GSBI5 (gpio24/gpio25) alongside
> its pinctrl default and sleep states.
> 
> Assisted-by: Claude:claude-opus-4.6
> Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
> ---
>  arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 35 ++++++++++++++++++++++++++++++++
>  1 file changed, 35 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
> index fd28401cebb5..2088baef6c30 100644
> --- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
> +++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
> @@ -185,6 +185,24 @@ i2c3-pins {
>  				};
>  			};
>  
> +			i2c5_default_state: i2c5-default-state {
> +				i2c5-pins {

You can drop this inner layer (i2c5-pins {}) and store the properties
directly under the -state {} node

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad