This series adds support for the Analog Devices AD5706R, a 4-channel
16-bit current output digital-to-analog converter with SPI interface.

The AD5706R features:
  - 4 independent current output DAC channels
  - Configurable output ranges (50mA, 150mA, 200mA, 300mA)
  - Hardware and software LDAC trigger with configurable edge selection
  - Toggle and dither modes per channel
  - Internal or external voltage reference selection
  - PWM-controlled LDAC
  - Dynamic change SPI speed

The driver exposes standard IIO raw/scale/offset channel attributes for
DAC output control, sampling frequency for PWM-based LDAC timing, and
extended attributes for device configuration including output range
selection, trigger mode, and multiplexer output.

This driver is developed and tested on the Cora Z7S platform using
the AXI SPI Engine and AXI CLKGEN IP cores. The 'clocks' property
enables dynamic SPI clock rate management via the CLKGEN.

Datasheet: https://www.analog.com/en/products/ad5706r.html

Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
---
Changes in v4:
- dt-bindings:
  - Reverted pwm and gpio entries.
  - Added missing power supply properties
  - Clocks not added back as they were driver specific, not device
    properties
- driver:
  - Added missing includes
  - Converted to use regmap with custom SPI bus implementation.
    spi_write_then_read not applied as suggested, prevents future
    need to change SPI speed
  - removed driver speciifc mutex/guards in favor of regmap internal
    locking
  - Minor style cleanups
- Link to v3: https://lore.kernel.org/r/20260318-dev_ad5706r-v3-0-5d078f41e988@analog.com

Changes in v3:
- Added MAINTAINERS entry, files added on each patch
- dt-bindings:
  - Added allOf and ref to spi-peripheral-props.yaml
  - Changed additionalProperties to unevaluatedProperties
  - Added avdd-supply property and added it to required
- driver:
  - Removed redundant includes, added respective includes of APIs used
  - Simplified bit manipulation in SPI read/write, used feedback from v2
  - Fixed inconsistent trailing commas in device ID tables
  - Removed zero initialization in spi_device_id
- Link to v2: https://lore.kernel.org/r/20260311-dev_ad5706r-v2-0-f367063dbd1b@analog.com

Changes in v2:
- Stripped driver down to basic DAC functionality (read/write raw,
  read-only scale) as suggested.
- Removed PWM (LDAC), GPIO (reset/shutdown), clock generator,
  SPI engine frequency switching, debugfs streaming, and all
  custom ext_info sysfs attributes
- Removed regmap, IIO_BUFFER, and iio/sysfs.h dependencies
- Simplified SPI read/write to use standard spi_sync_transfer
  without clock mode logic
- Scale reports default 50mA range as read-only using
  IIO_VAL_FRACTIONAL_LOG2; writable range selection deferred
  to future follow-up series
- Simplified DT binding to only require compatible, reg, and
  spi-max-frequency
- Link to v1: https://lore.kernel.org/r/20260220-dev_ad5706r-v1-0-7253bbd74889@analog.com

---
Alexis Czezar Torreno (2):
      dt-bindings: iio: dac: Add ADI AD5706R
      iio: dac: ad5706r: Add support for AD5706R DAC

 .../devicetree/bindings/iio/dac/adi,ad5706r.yaml   | 105 +++++++++
 MAINTAINERS                                        |   8 +
 drivers/iio/dac/Kconfig                            |  10 +
 drivers/iio/dac/Makefile                           |   1 +
 drivers/iio/dac/ad5706r.c                          | 244 +++++++++++++++++++++
 5 files changed, 368 insertions(+)
---
base-commit: 3674f3ca92730d9a07b42b311f1337d83c4d5605
change-id: 20260220-dev_ad5706r-2105e1dd29ab

Best regards,
-- 
Alexis Czezar Torreno <alexisczezar.torreno@analog.com>