Follow pattern of pmk8350 to add missing pmk8550 VADC to hamoa.
Register address of 0x9000 matches example schema for spmi-adc5-gen3.

Signed-off-by: Aleksandrs Vinarskis <alex@vinarskis.com>
---
 arch/arm64/boot/dts/qcom/hamoa-pmics.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/hamoa-pmics.dtsi b/arch/arm64/boot/dts/qcom/hamoa-pmics.dtsi
index 6a31a0adf8be472badea502a916cdbc9477e9f2b..58c0dd3ccca70bce3424f83bfd5a52b1fef35c2e 100644
--- a/arch/arm64/boot/dts/qcom/hamoa-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/hamoa-pmics.dtsi
@@ -218,6 +218,17 @@ pon_resin: resin {
 			};
 		};
 
+		pmk8550_vadc: adc@9000 {
+			compatible = "qcom,spmi-adc5-gen3";
+			reg = <0x9000>, <0x9100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0x0 0x90 0x1 IRQ_TYPE_EDGE_RISING>,
+				     <0x0 0x91 0x1 IRQ_TYPE_EDGE_RISING>;
+			#io-channel-cells = <1>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		pmk8550_rtc: rtc@6100 {
 			compatible = "qcom,pmk8350-rtc";
 			reg = <0x6100>, <0x6200>;

-- 
2.53.0

On 4/1/26 9:33 AM, Aleksandrs Vinarskis wrote:
> Follow pattern of pmk8350 to add missing pmk8550 VADC to hamoa.
> Register address of 0x9000 matches example schema for spmi-adc5-gen3.
> 
> Signed-off-by: Aleksandrs Vinarskis <alex@vinarskis.com>
> ---
>  arch/arm64/boot/dts/qcom/hamoa-pmics.dtsi | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/hamoa-pmics.dtsi b/arch/arm64/boot/dts/qcom/hamoa-pmics.dtsi
> index 6a31a0adf8be472badea502a916cdbc9477e9f2b..58c0dd3ccca70bce3424f83bfd5a52b1fef35c2e 100644
> --- a/arch/arm64/boot/dts/qcom/hamoa-pmics.dtsi
> +++ b/arch/arm64/boot/dts/qcom/hamoa-pmics.dtsi
> @@ -218,6 +218,17 @@ pon_resin: resin {
>  			};
>  		};
>  
> +		pmk8550_vadc: adc@9000 {
> +			compatible = "qcom,spmi-adc5-gen3";
> +			reg = <0x9000>, <0x9100>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			interrupts = <0x0 0x90 0x1 IRQ_TYPE_EDGE_RISING>,
> +				     <0x0 0x91 0x1 IRQ_TYPE_EDGE_RISING>;
> +			#io-channel-cells = <1>;
> +			#thermal-sensor-cells = <1>;

You can probably add the DIE_TEMP/XO_THERM channels here directly

Konrad