[PATCH v5 0/6] Enable new features for flipkart-rimob

Cristian Cozzolino via B4 Relay posted 6 patches 1 day, 1 hour ago
.../bindings/display/panel/novatek,nt35532.yaml    |  80 +++
MAINTAINERS                                        |   6 +
.../arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts | 138 +++-
drivers/gpu/drm/panel/Kconfig                      |  10 +
drivers/gpu/drm/panel/Makefile                     |   1 +
drivers/gpu/drm/panel/panel-novatek-nt35532.c      | 796 +++++++++++++++++++++
6 files changed, 1030 insertions(+), 1 deletion(-)
[PATCH v5 0/6] Enable new features for flipkart-rimob
Posted by Cristian Cozzolino via B4 Relay 1 day, 1 hour ago
This series enables a set of miscellaneous features for Billion Capture+ 
(a handset using the MSM8953 SoC released in 2017):
- Panel and GPU
- Touchscreen
- WiFi + Bluetooth
- Hall sensor 

Patches 1 and 2 provide a driver for Novatek NT35532 and its corresponding
devicetree bindings, required for enabling panel in DTS. The remaining 
patches are all DTS changes, aimed to enable the features listed above.

To: Neil Armstrong <neil.armstrong@linaro.org>
To: Jessica Zhang <jesszhan0024@gmail.com>
To: David Airlie <airlied@gmail.com>
To: Simona Vetter <simona@ffwll.ch>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To: Maxime Ripard <mripard@kernel.org>
To: Thomas Zimmermann <tzimmermann@suse.de>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konradybcio@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-msm@vger.kernel.org
Cc: ~postmarketos/upstreaming@lists.sr.ht
Cc: phone-devel@vger.kernel.org 

Signed-off-by: Cristian Cozzolino <cristian_ci@protonmail.com>
---
Changes in v5:
- Based on dts-coding-style.html ("Nodes without unit addresses shall be
  ordered alpha-numerically by the node name. For a few node types, they 
  can be ordered by the main property, e.g. pin configuration states
  ordered by value of “pins” property."), sort pinctrl states by GPIO 
  index (Konrad);
- Pick up tags;
- Link to v4: https://lore.kernel.org/r/20260327-rimob-new-features-v4-0-06edff9c4509@protonmail.com

Changes in v4:
- (patch 1/6): added a new compatible (since it's not possible to
  identify panel vendor/id), matching user of this device and leaving
  novatek,nt35532 as fallback (Dmitry);
- (patch 2/6):
  - according to bindings changes, make panel driver handling multiple
    panels paired with NT35532 and use specific compatible/data;
  - due to changes applied to panel code, remove tag received previously
    by Dmitry.
- (patch 3/6): 
  - use a specific panel compatible, according to bindings changes;
  - remove 'output-high' property from panel pinctrl, since panel is not
    reset.
- Link to v3: https://lore.kernel.org/r/20260321-rimob-new-features-v3-0-d4b8ee867de7@protonmail.com

Changes in v3:
- (patch 1/6): removed avdd, avee and vci supplies from 'required' properties;
- (patch 2/6):
  - removed "select VIDEOMODE_HELPERS" from nt35532 Kconfig entry, since 
    its functions are not used (but this option is enabled and its code 
    compiled anyway) by nt35532 panel driver;
  - pick up tags (Dmitry).
- (patch 3/6): replaced a506_zap.mdt with a506_zap.mbn firmware name
  in gpu_zap_shader (Dmitry); 
- (patch 5/6): pick up tags (Konrad);
- (patch 6/6): pick up tags (Konrad);
- Link to v2: https://lore.kernel.org/r/20260318-rimob-new-features-v2-0-c1bf8917449e@protonmail.com

Changes in v2:
- (patch 1/6): define power supplies in the bindings as per datasheet  
  and update example;
- (patch 2/6): add blank lines where required between mipi dsi write
  sequences in nt35532_on() function and make use of names for mipi dcs
  commands, instead of hex numbers, to improve readibility (Dmitry); 
- (patch 3/6): move pinctrl lines ibto panel node and get rid of
  sleep/reset state, since panel just uses one pinctrl state for
  default/sleep (Dmitry). Also, update power supplies according to
  bindings; 
- (patch 4/6): pick up tags (Konrad,Dmitry);
- (patch 6/6): squash hall sensor node into gpio-keys (Dmitry);
- Link to v1: https://lore.kernel.org/r/20260308-rimob-new-features-v1-0-aa2c330572c0@protonmail.com

---
Cristian Cozzolino (6):
      dt-bindings: display: panel: Add Novatek NT35532 LCD DSI
      drm/panel: Add driver for Novatek NT35532
      arm64: dts: qcom: msm8953-flipkart-rimob: Enable display and GPU
      arm64: dts: qcom: msm8953-flipkart-rimob: Enable WiFi/Bluetooth
      arm64: dts: qcom: msm8953-flipkart-rimob: Enable touchscreen
      arm64: dts: qcom: msm8953-flipkart-rimob: Enable Hall sensor

 .../bindings/display/panel/novatek,nt35532.yaml    |  80 +++
 MAINTAINERS                                        |   6 +
 .../arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts | 138 +++-
 drivers/gpu/drm/panel/Kconfig                      |  10 +
 drivers/gpu/drm/panel/Makefile                     |   1 +
 drivers/gpu/drm/panel/panel-novatek-nt35532.c      | 796 +++++++++++++++++++++
 6 files changed, 1030 insertions(+), 1 deletion(-)
---
base-commit: cf7c3c02fdd0dfccf4d6611714273dcb538af2cb
change-id: 20260303-rimob-new-features-037944b3a620

Best regards,
-- 
Cristian Cozzolino <cristian_ci@protonmail.com>