From: Guodong Xu <guodong@riscstar.com>

SpacemiT K3 reuses most of the PDMA IP design found on K1, with one difference
being the extended DRCMR base address. This patch adds "spacemit,k3-pdma"
compatible string and it defines a new mmp_pdma_ops for k3 pdma.

Signed-off-by: Guodong Xu <guodong@riscstar.com>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
---
 drivers/dma/mmp_pdma.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/dma/mmp_pdma.c b/drivers/dma/mmp_pdma.c
index 6112369006ee..386e85cd4882 100644
--- a/drivers/dma/mmp_pdma.c
+++ b/drivers/dma/mmp_pdma.c
@@ -52,6 +52,7 @@
 #define DCSR_EORINTR	BIT(9)	/* The end of Receive */
 
 #define DRCMR_BASE		0x0100
+#define DRCMR_EXT_BASE_K3	0x1000
 #define DRCMR_EXT_BASE_DEFAULT	0x1100
 #define DRCMR_REQ_LIMIT		64
 #define DRCMR_MAPVLD	BIT(7)	/* Map Valid (read / write) */
@@ -1207,6 +1208,20 @@ static const struct mmp_pdma_ops spacemit_k1_pdma_ops = {
 	.drcmr_ext_base = DRCMR_EXT_BASE_DEFAULT,
 };
 
+static const struct mmp_pdma_ops spacemit_k3_pdma_ops = {
+	.write_next_addr = write_next_addr_64,
+	.read_src_addr = read_src_addr_64,
+	.read_dst_addr = read_dst_addr_64,
+	.set_desc_next_addr = set_desc_next_addr_64,
+	.set_desc_src_addr = set_desc_src_addr_64,
+	.set_desc_dst_addr = set_desc_dst_addr_64,
+	.get_desc_src_addr = get_desc_src_addr_64,
+	.get_desc_dst_addr = get_desc_dst_addr_64,
+	.run_bits = (DCSR_RUN | DCSR_LPAEEN | DCSR_EORIRQEN | DCSR_EORSTOPEN),
+	.dma_width = 64,
+	.drcmr_ext_base = DRCMR_EXT_BASE_K3,
+};
+
 static const struct of_device_id mmp_pdma_dt_ids[] = {
 	{
 		.compatible = "marvell,pdma-1.0",
@@ -1214,6 +1229,9 @@ static const struct of_device_id mmp_pdma_dt_ids[] = {
 	}, {
 		.compatible = "spacemit,k1-pdma",
 		.data = &spacemit_k1_pdma_ops
+	}, {
+		.compatible = "spacemit,k3-pdma",
+		.data = &spacemit_k3_pdma_ops
 	}, {
 		/* sentinel */
 	}

-- 
2.53.0