Describe the ADSP remoteproc node along with its dependencies, including
the IPCC mailbox, AOSS QMP and SMP2P links used for communication.
The Eliza SoC features a USB 3.1 Gen 2 controller connected to a QMP
combo PHY and an SNPS eUSB2 PHY. Describe them.
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/eliza.dtsi | 261 ++++++++++++++++++++++++++++++++++++
1 file changed, 261 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/eliza.dtsi b/arch/arm64/boot/dts/qcom/eliza.dtsi
index 4a7a0ac40ce6..37baa4b240d6 100644
--- a/arch/arm64/boot/dts/qcom/eliza.dtsi
+++ b/arch/arm64/boot/dts/qcom/eliza.dtsi
@@ -6,10 +6,13 @@
#include <dt-bindings/clock/qcom,eliza-gcc.h>
#include <dt-bindings/clock/qcom,eliza-tcsr.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interconnect/qcom,eliza-rpmh.h>
#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom,rpmhpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -596,6 +599,30 @@ llcc_lpi_mem: llcc-lpi@ff800000 {
};
};
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ smp2p_adsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_adsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
soc: soc@0 {
compatible = "simple-bus";
@@ -624,6 +651,17 @@ gcc: clock-controller@100000 {
#power-domain-cells = <1>;
};
+ ipcc: mailbox@406000 {
+ compatible = "qcom,eliza-ipcc", "qcom,ipcc";
+ reg = <0x0 0x00406000 0x0 0x1000>;
+
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ #mbox-cells = <2>;
+ };
+
qupv3_2: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x008c0000 0x0 0x2000>;
@@ -862,6 +900,55 @@ tcsr: clock-controller@1fbf000 {
#reset-cells = <1>;
};
+ remoteproc_adsp: remoteproc@3000000 {
+ compatible = "qcom,eliza-adsp-pas";
+ reg = <0x0 0x03000000 0x0 0x10000>;
+
+ interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack",
+ "shutdown-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_LCX>,
+ <&rpmhpd RPMHPD_LMX>;
+ power-domain-names = "lcx",
+ "lmx";
+
+ interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+ memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+ };
+ };
+
lpass_ag_noc: interconnect@7e40000 {
compatible = "qcom,eliza-lpass-ag-noc";
reg = <0x0 0x07e40000 0x0 0xe080>;
@@ -883,6 +970,167 @@ lpass_lpicx_noc: interconnect@7420000 {
#interconnect-cells = <2>;
};
+ usb_hsphy: phy@88e3000 {
+ compatible = "qcom,eliza-snps-eusb2-phy",
+ "qcom,sm8550-snps-eusb2-phy";
+ reg = <0x0 0x088e3000 0x0 0x154>;
+ #phy-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+ status = "disabled";
+ };
+
+ usb_dp_qmpphy: phy@88e8000 {
+ compatible = "qcom,eliza-qmp-usb3-dp-phy",
+ "qcom,sm8650-qmp-usb3-dp-phy";
+ reg = <0x0 0x088e8000 0x0 0x4000>;
+
+ clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&tcsr TCSR_USB3_CLKREF_EN>,
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "usb3_pipe";
+
+ resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+ <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+ reset-names = "phy",
+ "common";
+
+ power-domains = <&gcc GCC_USB3_PHY_GDSC>;
+
+ #clock-cells = <1>;
+ #phy-cells = <1>;
+
+ orientation-switch;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_dp_qmpphy_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_dp_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb_dwc3_ss>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_dp_qmpphy_dp_in: endpoint {
+ };
+ };
+ };
+ };
+
+ usb: usb@a600000 {
+ compatible = "qcom,eliza-dwc3", "qcom,snps-dwc3";
+ reg = <0x0 0x0a600000 0x0 0xfc100>;
+
+ interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "dwc_usb3",
+ "pwr_event",
+ "hs_phy_irq",
+ "dp_hs_phy_irq",
+ "dm_hs_phy_irq",
+ "ss_phy_irq";
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "xo";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>,
+ <200000000>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ phys = <&usb_hsphy>,
+ <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+ phy-names = "usb2-phy",
+ "usb3-phy";
+
+ interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
+ iommus = <&apps_smmu 0x40 0x0>;
+
+ power-domains = <&gcc GCC_USB30_PRIM_GDSC>;
+ required-opps = <&rpmhpd_opp_nom>;
+
+ snps,hird-threshold = /bits/ 8 <0x0>;
+ snps,usb2-gadget-lpm-disable;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,dis-u1-entry-quirk;
+ snps,dis-u2-entry-quirk;
+ snps,is-utmi-l1-suspend;
+ snps,usb3_lpm_capable;
+ snps,usb2-lpm-disable;
+ snps,has-lpm-erratum;
+ tx-fifo-resize;
+
+ dma-coherent;
+ usb-role-switch;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_dwc3_ss: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+ };
+ };
+ };
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,eliza-pdc", "qcom,pdc";
reg = <0x0 0x0b220000 0x0 0x40000>,
@@ -957,6 +1205,19 @@ tsens2: thermal-sensor@c22a000 {
#thermal-sensor-cells = <1>;
};
+ aoss_qmp: power-management@c300000 {
+ compatible = "qcom,eliza-aoss-qmp", "qcom,aoss-qmp";
+ reg = <0x0 0x0c300000 0x0 0x400>;
+
+ interrupt-parent = <&ipcc>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ #clock-cells = <0>;
+ };
+
spmi: arbiter@c400000 {
compatible = "qcom,eliza-spmi-pmic-arb",
"qcom,x1e80100-spmi-pmic-arb";
--
2.48.1On 3/31/26 12:37 PM, Abel Vesa wrote:
> Describe the ADSP remoteproc node along with its dependencies, including
> the IPCC mailbox, AOSS QMP and SMP2P links used for communication.
>
> The Eliza SoC features a USB 3.1 Gen 2 controller connected to a QMP
> combo PHY and an SNPS eUSB2 PHY. Describe them.
>
> Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
> ---
[...]
> + usb_hsphy: phy@88e3000 {
> + compatible = "qcom,eliza-snps-eusb2-phy",
> + "qcom,sm8550-snps-eusb2-phy";
> + reg = <0x0 0x088e3000 0x0 0x154>;
> + #phy-cells = <0>;
> +
> + clocks = <&rpmhcc RPMH_CXO_CLK>;
This is TCSR_USB2_CLKREF_EN
> + usb: usb@a600000 {
> + compatible = "qcom,eliza-dwc3", "qcom,snps-dwc3";
Does the device suspend and resume successfully?
Konrad
On 31/03/2026 12:37, Abel Vesa wrote: > Describe the ADSP remoteproc node along with its dependencies, including > the IPCC mailbox, AOSS QMP and SMP2P links used for communication. > > The Eliza SoC features a USB 3.1 Gen 2 controller connected to a QMP > combo PHY and an SNPS eUSB2 PHY. Describe them. > > Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> > --- > arch/arm64/boot/dts/qcom/eliza.dtsi | 261 ++++++++++++++++++++++++++++++++++++ > 1 file changed, 261 insertions(+) Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Best regards, Krzysztof
© 2016 - 2026 Red Hat, Inc.