Add a field for the default current limit to the bq257xx_info structure and
use it instead of the hardcoded value in the probe function.

This prepares the driver for allowing different electrical constraints for
different chip variants.

Tested-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Alexey Charkov <alchark@flipper.net>
---
 drivers/power/supply/bq257xx_charger.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/power/supply/bq257xx_charger.c b/drivers/power/supply/bq257xx_charger.c
index 7ca4ae610902..39718223c3f9 100644
--- a/drivers/power/supply/bq257xx_charger.c
+++ b/drivers/power/supply/bq257xx_charger.c
@@ -18,6 +18,7 @@ struct bq257xx_chg;
 
 /**
  * struct bq257xx_chip_info - chip specific routines
+ * @default_iindpm_uA: default input current limit in microamps
  * @bq257xx_hw_init: init function for hw
  * @bq257xx_hw_shutdown: shutdown function for hw
  * @bq257xx_get_state: get and update state of hardware
@@ -26,6 +27,7 @@ struct bq257xx_chg;
  * @bq257xx_set_iindpm: set maximum input current (in uA)
  */
 struct bq257xx_chip_info {
+	int default_iindpm_uA;
 	int (*bq257xx_hw_init)(struct bq257xx_chg *pdata);
 	void (*bq257xx_hw_shutdown)(struct bq257xx_chg *pdata);
 	int (*bq257xx_get_state)(struct bq257xx_chg *pdata);
@@ -627,6 +629,7 @@ static const struct power_supply_desc bq257xx_power_supply_desc = {
 };
 
 static const struct bq257xx_chip_info bq25703_chip_info = {
+		.default_iindpm_uA = BQ25703_IINDPM_DEFAULT_UA,
 		.bq257xx_hw_init = &bq25703_hw_init,
 		.bq257xx_hw_shutdown = &bq25703_hw_shutdown,
 		.bq257xx_get_state = &bq25703_get_state,
@@ -675,7 +678,7 @@ static int bq257xx_parse_dt(struct bq257xx_chg *pdata,
 				       "input-current-limit-microamp",
 				       &pdata->iindpm_max);
 	if (ret)
-		pdata->iindpm_max = BQ25703_IINDPM_DEFAULT_UA;
+		pdata->iindpm_max = pdata->chip->default_iindpm_uA;
 
 	return 0;
 }

-- 
2.52.0