The field was not used anywhere in the driver, so just drop it. This helps
further slim down the platform data structure.

Acked-by: Mark Brown <broonie@kernel.org>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Alexey Charkov <alchark@flipper.net>
---
 drivers/regulator/bq257xx-regulator.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/regulator/bq257xx-regulator.c b/drivers/regulator/bq257xx-regulator.c
index 812938e565e3..674dae6109e9 100644
--- a/drivers/regulator/bq257xx-regulator.c
+++ b/drivers/regulator/bq257xx-regulator.c
@@ -15,7 +15,6 @@
 #include <linux/regulator/of_regulator.h>
 
 struct bq257xx_reg_data {
-	struct regulator_dev *bq257xx_reg;
 	struct gpio_desc *otg_en_gpio;
 	struct regulator_desc desc;
 };
@@ -139,6 +138,7 @@ static int bq257xx_regulator_probe(struct platform_device *pdev)
 	struct bq257xx_reg_data *pdata;
 	struct device_node *np = dev->of_node;
 	struct regulator_config cfg = {};
+	struct regulator_dev *rdev;
 
 	pdev->dev.of_node = pdev->dev.parent->of_node;
 	pdev->dev.of_node_reused = true;
@@ -159,9 +159,9 @@ static int bq257xx_regulator_probe(struct platform_device *pdev)
 	if (!cfg.regmap)
 		return -ENODEV;
 
-	pdata->bq257xx_reg = devm_regulator_register(dev, &pdata->desc, &cfg);
-	if (IS_ERR(pdata->bq257xx_reg)) {
-		return dev_err_probe(&pdev->dev, PTR_ERR(pdata->bq257xx_reg),
+	rdev = devm_regulator_register(dev, &pdata->desc, &cfg);
+	if (IS_ERR(rdev)) {
+		return dev_err_probe(&pdev->dev, PTR_ERR(rdev),
 				     "error registering bq257xx regulator");
 	}
 

-- 
2.52.0