Add new dai ids entries for LPASS LPI MI2S and SENARY MI2S audio lines.
Co-developed-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Signed-off-by: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
.../bindings/sound/qcom,q6dsp-lpass-ports.yaml | 5 ++++-
include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h | 12 ++++++++++++
2 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml
index 08c618e7e428..2b27d6c8f58f 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml
+++ b/Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml
@@ -126,13 +126,16 @@ patternProperties:
reg:
contains:
# MI2S DAI ID range PRIMARY_MI2S_RX - QUATERNARY_MI2S_TX and
- # QUINARY_MI2S_RX - QUINARY_MI2S_TX
+ # QUINARY_MI2S_RX - QUINARY_MI2S_TX and
+ # LPI_MI2S_RX_0 - SENARY_MI2S_TX
items:
oneOf:
- minimum: 16
maximum: 23
- minimum: 127
maximum: 128
+ - minimum: 137
+ maximum: 148
then:
required:
- qcom,sd-lines
diff --git a/include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h b/include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h
index 6d1ce7f5da51..45850f2d4342 100644
--- a/include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h
+++ b/include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h
@@ -140,6 +140,18 @@
#define DISPLAY_PORT_RX_6 134
#define DISPLAY_PORT_RX_7 135
#define USB_RX 136
+#define LPI_MI2S_RX_0 137
+#define LPI_MI2S_TX_0 138
+#define LPI_MI2S_RX_1 139
+#define LPI_MI2S_TX_1 140
+#define LPI_MI2S_RX_2 141
+#define LPI_MI2S_TX_2 142
+#define LPI_MI2S_RX_3 143
+#define LPI_MI2S_TX_3 144
+#define LPI_MI2S_RX_4 145
+#define LPI_MI2S_TX_4 146
+#define SENARY_MI2S_RX 147
+#define SENARY_MI2S_TX 148
#define LPASS_CLK_ID_PRI_MI2S_IBIT 1
#define LPASS_CLK_ID_PRI_MI2S_EBIT 2
--
2.47.3