It seems that the Armada 3700 is the only platform where the USB3 specific
PHY is defined before the USB2 specific one in the device tree:

  $ git grep -E 'phy-names[ \t]*=[ \t]*"usb3-phy"[ \t]*,' next-20260327 -- *.dts *.dtsi | tr '\t' ' '
  next-20260327:arch/arm64/boot/dts/marvell/armada-37xx.dtsi:    phy-names = "usb3-phy", "usb2-utmi-otg-phy";

In contrary to this, there are 93 other platforms/boards where 'usb2-phy'
is defined first:

  $ git grep -E 'phy-names[ \t]*=[ \t]*"usb2-phy"[ \t]*,' next-20260327 -- *.dts *.dtsi | wc -l
  93

Swap the order of the USB3 and USB2 PHYs to follow the common pattern
used on other platforms.

No functional changes intended.

Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
---
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 7470d504a41081b32bee45368028189a13ea7087..360fc24fdde2204540ac415852146d3020be87c0 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -371,8 +371,8 @@ usb3: usb@58000 {
 				reg = <0x58000 0x4000>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&sb_periph_clk 12>;
-				phys = <&comphy0 0>, <&usb2_utmi_otg_phy>;
-				phy-names = "usb3-phy", "usb2-phy";
+				phys = <&usb2_utmi_otg_phy>, <&comphy0 0>;
+				phy-names = "usb2-phy", "usb3-phy";
 				status = "disabled";
 			};
 

-- 
2.53.0