From: Ronak Raheja <ronak.raheja@oss.qualcomm.com>

Enable USB support on Kaanapali MTP variant. Enable USB controller in
device mode till glink node is added.

Signed-off-by: Ronak Raheja <ronak.raheja@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/kaanapali-mtp.dts | 27 ++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
index a603f3056d83..38269aebdf03 100644
--- a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
@@ -82,6 +82,11 @@ key-volume-up {
 		};
 	};
 
+	pmih0108_e1_eusb2_repeater {
+		vdd18-supply = <&vreg_l15b_1p8>;
+		vdd3-supply = <&vreg_l5b_3p1>;
+	};
+
 	sound {
 		compatible = "qcom,kaanapali-sndcard", "qcom,sm8450-sndcard";
 		model = "Kaanapali-MTP";
@@ -1326,3 +1331,25 @@ &ufs_mem_phy {
 
 	status = "okay";
 };
+
+&usb {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_hsphy {
+	vdd-supply = <&vreg_l4f_0p8>;
+	vdda12-supply = <&vreg_l1d_1p2>;
+
+	phys = <&pmih0108_e1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	vdda-phy-supply = <&vreg_l1d_1p2>;
+	vdda-pll-supply = <&vreg_l4f_0p8>;
+
+	status = "okay";
+};
-- 
2.34.1

On 3/29/26 7:52 PM, Krishna Kurapati wrote:
> From: Ronak Raheja <ronak.raheja@oss.qualcomm.com>
> 
> Enable USB support on Kaanapali MTP variant. Enable USB controller in
> device mode till glink node is added.
> 
> Signed-off-by: Ronak Raheja <ronak.raheja@oss.qualcomm.com>
> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/kaanapali-mtp.dts | 27 ++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
> index a603f3056d83..38269aebdf03 100644
> --- a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
> @@ -82,6 +82,11 @@ key-volume-up {
>  		};
>  	};
>  
> +	pmih0108_e1_eusb2_repeater {

Huh??

You're creating a new node here - /pmih0108_e1_eusb2_repeater{}

I believe your intent was to override it by label

Konrad