SM6125's SMMU uses 36bit VAs, which is a good indicator that we
should increase (dma-)ranges - and by extension #address- and
#size-cells to prevent things from getting lost in translation
(both literally and figuratively). Do so.
Fixes: 7bb7c90e0ac1 ("arm64: dts: qcom: Add Redmi Note 8T")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603141433.MDqfoVHn-lkp@intel.com/
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Biswapriyo Nath <nathbappai@gmail.com>
---
arch/arm64/boot/dts/qcom/sm6125.dtsi | 153 ++++++++++++++++++-----------------
1 file changed, 78 insertions(+), 75 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index c84911a98fce..a1a296f90f44 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -374,22 +374,23 @@ smem: smem {
};
soc@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x00 0x00 0x00 0xffffffff>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0 0 0 0 0x10 0>;
+ dma-ranges = <0 0 0 0 0x10 0>;
compatible = "simple-bus";
tcsr_mutex: hwlock@340000 {
compatible = "qcom,tcsr-mutex";
- reg = <0x00340000 0x20000>;
+ reg = <0x0 0x00340000 0x0 0x20000>;
#hwlock-cells = <1>;
};
tlmm: pinctrl@500000 {
compatible = "qcom,sm6125-tlmm";
- reg = <0x00500000 0x400000>,
- <0x00900000 0x400000>,
- <0x00d00000 0x400000>;
+ reg = <0x0 0x00500000 0x0 0x400000>,
+ <0x0 0x00900000 0x0 0x400000>,
+ <0x0 0x00d00000 0x0 0x400000>;
reg-names = "west", "south", "east";
interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
@@ -672,7 +673,7 @@ qup_uart4_default: qup-uart4-default-state {
gcc: clock-controller@1400000 {
compatible = "qcom,gcc-sm6125";
- reg = <0x01400000 0x1f0000>;
+ reg = <0x0 0x01400000 0x0 0x1f0000>;
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
@@ -682,7 +683,7 @@ gcc: clock-controller@1400000 {
hsusb_phy1: phy@1613000 {
compatible = "qcom,msm8996-qusb2-phy";
- reg = <0x01613000 0x180>;
+ reg = <0x0 0x01613000 0x0 0x180>;
#phy-cells = <0>;
clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
@@ -695,18 +696,18 @@ hsusb_phy1: phy@1613000 {
rng: rng@1b53000 {
compatible = "qcom,prng-ee";
- reg = <0x01b53000 0x1000>;
+ reg = <0x0 0x01b53000 0x0 0x1000>;
clocks = <&gcc GCC_PRNG_AHB_CLK>;
clock-names = "core";
};
spmi_bus: spmi@1c40000 {
compatible = "qcom,spmi-pmic-arb";
- reg = <0x01c40000 0x1100>,
- <0x01e00000 0x2000000>,
- <0x03e00000 0x100000>,
- <0x03f00000 0xa0000>,
- <0x01c0a000 0x26000>;
+ reg = <0x0 0x01c40000 0x0 0x1100>,
+ <0x0 0x01e00000 0x0 0x2000000>,
+ <0x0 0x03e00000 0x0 0x100000>,
+ <0x0 0x03f00000 0x0 0xa0000>,
+ <0x0 0x01c0a000 0x0 0x26000>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
@@ -720,12 +721,13 @@ spmi_bus: spmi@1c40000 {
rpm_msg_ram: sram@45f0000 {
compatible = "qcom,rpm-msg-ram";
- reg = <0x045f0000 0x7000>;
+ reg = <0x0 0x045f0000 0x0 0x7000>;
};
sdhc_1: mmc@4744000 {
compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
- reg = <0x04744000 0x1000>, <0x04745000 0x1000>;
+ reg = <0x0 0x04744000 0x0 0x1000>,
+ <0x0 0x04745000 0x0 0x1000>;
reg-names = "hc", "cqhci";
interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
@@ -752,7 +754,7 @@ sdhc_1: mmc@4744000 {
sdhc_2: mmc@4784000 {
compatible = "qcom,sm6125-sdhci", "qcom,sdhci-msm-v5";
- reg = <0x04784000 0x1000>;
+ reg = <0x0 0x04784000 0x0 0x1000>;
reg-names = "hc";
interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
@@ -780,7 +782,8 @@ sdhc_2: mmc@4784000 {
ufs_mem_hc: ufshc@4804000 {
compatible = "qcom,sm6125-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
- reg = <0x04804000 0x3000>, <0x04810000 0x8000>;
+ reg = <0x0 0x04804000 0x0 0x3000>,
+ <0x0 0x04810000 0x0 0x8000>;
reg-names = "std", "ice";
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
@@ -825,7 +828,7 @@ ufs_mem_hc: ufshc@4804000 {
ufs_mem_phy: phy@4807000 {
compatible = "qcom,sm6125-qmp-ufs-phy";
- reg = <0x04807000 0xdb8>;
+ reg = <0x0 0x04807000 0x0 0xdb8>;
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>,
@@ -846,7 +849,7 @@ ufs_mem_phy: phy@4807000 {
gpi_dma0: dma-controller@4a00000 {
compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma";
- reg = <0x04a00000 0x60000>;
+ reg = <0x0 0x04a00000 0x0 0x60000>;
interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
@@ -864,19 +867,19 @@ gpi_dma0: dma-controller@4a00000 {
qupv3_id_0: geniqup@4ac0000 {
compatible = "qcom,geni-se-qup";
- reg = <0x04ac0000 0x2000>;
+ reg = <0x0 0x04ac0000 0x0 0x2000>;
clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
clock-names = "m-ahb", "s-ahb";
iommus = <&apps_smmu 0x123 0x0>;
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
ranges;
status = "disabled";
i2c0: i2c@4a80000 {
compatible = "qcom,geni-i2c";
- reg = <0x04a80000 0x4000>;
+ reg = <0x0 0x04a80000 0x0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
@@ -893,7 +896,7 @@ i2c0: i2c@4a80000 {
spi0: spi@4a80000 {
compatible = "qcom,geni-spi";
- reg = <0x04a80000 0x4000>;
+ reg = <0x0 0x04a80000 0x0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
@@ -910,7 +913,7 @@ spi0: spi@4a80000 {
i2c1: i2c@4a84000 {
compatible = "qcom,geni-i2c";
- reg = <0x04a84000 0x4000>;
+ reg = <0x0 0x04a84000 0x0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
@@ -927,7 +930,7 @@ i2c1: i2c@4a84000 {
i2c2: i2c@4a88000 {
compatible = "qcom,geni-i2c";
- reg = <0x04a88000 0x4000>;
+ reg = <0x0 0x04a88000 0x0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
@@ -944,7 +947,7 @@ i2c2: i2c@4a88000 {
spi2: spi@4a88000 {
compatible = "qcom,geni-spi";
- reg = <0x04a88000 0x4000>;
+ reg = <0x0 0x04a88000 0x0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
@@ -961,7 +964,7 @@ spi2: spi@4a88000 {
i2c3: i2c@4a8c000 {
compatible = "qcom,geni-i2c";
- reg = <0x04a8c000 0x4000>;
+ reg = <0x0 0x04a8c000 0x0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
@@ -978,7 +981,7 @@ i2c3: i2c@4a8c000 {
i2c4: i2c@4a90000 {
compatible = "qcom,geni-i2c";
- reg = <0x04a90000 0x4000>;
+ reg = <0x0 0x04a90000 0x0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
@@ -995,7 +998,7 @@ i2c4: i2c@4a90000 {
uart4: serial@4a90000 {
compatible = "qcom,geni-debug-uart";
- reg = <0x04a90000 0x4000>;
+ reg = <0x0 0x04a90000 0x0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
@@ -1007,7 +1010,7 @@ uart4: serial@4a90000 {
gpi_dma1: dma-controller@4c00000 {
compatible = "qcom,sm6125-gpi-dma", "qcom,sdm845-gpi-dma";
- reg = <0x04c00000 0x60000>;
+ reg = <0x0 0x04c00000 0x0 0x60000>;
interrupts = <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
@@ -1025,19 +1028,19 @@ gpi_dma1: dma-controller@4c00000 {
qupv3_id_1: geniqup@4cc0000 {
compatible = "qcom,geni-se-qup";
- reg = <0x04cc0000 0x2000>;
+ reg = <0x0 0x04cc0000 0x0 0x2000>;
clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
<&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
clock-names = "m-ahb", "s-ahb";
iommus = <&apps_smmu 0x143 0x0>;
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
ranges;
status = "disabled";
i2c5: i2c@4c80000 {
compatible = "qcom,geni-i2c";
- reg = <0x04c80000 0x4000>;
+ reg = <0x0 0x04c80000 0x0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
@@ -1054,7 +1057,7 @@ i2c5: i2c@4c80000 {
spi5: spi@4c80000 {
compatible = "qcom,geni-spi";
- reg = <0x04c80000 0x4000>;
+ reg = <0x0 0x04c80000 0x0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
@@ -1071,7 +1074,7 @@ spi5: spi@4c80000 {
i2c6: i2c@4c84000 {
compatible = "qcom,geni-i2c";
- reg = <0x04c84000 0x4000>;
+ reg = <0x0 0x04c84000 0x0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
@@ -1088,7 +1091,7 @@ i2c6: i2c@4c84000 {
spi6: spi@4c84000 {
compatible = "qcom,geni-spi";
- reg = <0x04c84000 0x4000>;
+ reg = <0x0 0x04c84000 0x0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
@@ -1105,7 +1108,7 @@ spi6: spi@4c84000 {
i2c7: i2c@4c88000 {
compatible = "qcom,geni-i2c";
- reg = <0x04c88000 0x4000>;
+ reg = <0x0 0x04c88000 0x0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
@@ -1122,7 +1125,7 @@ i2c7: i2c@4c88000 {
i2c8: i2c@4c8c000 {
compatible = "qcom,geni-i2c";
- reg = <0x04c8c000 0x4000>;
+ reg = <0x0 0x04c8c000 0x0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
@@ -1139,7 +1142,7 @@ i2c8: i2c@4c8c000 {
spi8: spi@4c8c000 {
compatible = "qcom,geni-spi";
- reg = <0x04c8c000 0x4000>;
+ reg = <0x0 0x04c8c000 0x0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>;
@@ -1156,7 +1159,7 @@ spi8: spi@4c8c000 {
i2c9: i2c@4c90000 {
compatible = "qcom,geni-i2c";
- reg = <0x04c90000 0x4000>;
+ reg = <0x0 0x04c90000 0x0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
@@ -1173,7 +1176,7 @@ i2c9: i2c@4c90000 {
spi9: spi@4c90000 {
compatible = "qcom,geni-spi";
- reg = <0x04c90000 0x4000>;
+ reg = <0x0 0x04c90000 0x0 0x4000>;
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
clock-names = "se";
interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>;
@@ -1191,9 +1194,9 @@ spi9: spi@4c90000 {
usb3: usb@4ef8800 {
compatible = "qcom,sm6125-dwc3", "qcom,dwc3";
- reg = <0x04ef8800 0x400>;
- #address-cells = <1>;
- #size-cells = <1>;
+ reg = <0x0 0x04ef8800 0x0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
ranges;
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
@@ -1228,7 +1231,7 @@ usb3: usb@4ef8800 {
usb3_dwc3: usb@4e00000 {
compatible = "snps,dwc3";
- reg = <0x04e00000 0xcd00>;
+ reg = <0x0 0x04e00000 0x0 0xcd00>;
interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x100 0x0>;
phys = <&hsusb_phy1>;
@@ -1244,12 +1247,12 @@ usb3_dwc3: usb@4e00000 {
sram@4690000 {
compatible = "qcom,rpm-stats";
- reg = <0x04690000 0x10000>;
+ reg = <0x0 0x04690000 0x0 0x10000>;
};
mdss: display-subsystem@5e00000 {
compatible = "qcom,sm6125-mdss";
- reg = <0x05e00000 0x1000>;
+ reg = <0x0 0x05e00000 0x0 0x1000>;
reg-names = "mdss";
interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
@@ -1269,16 +1272,16 @@ mdss: display-subsystem@5e00000 {
iommus = <&apps_smmu 0x400 0x0>;
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
ranges;
status = "disabled";
mdss_mdp: display-controller@5e01000 {
compatible = "qcom,sm6125-dpu";
- reg = <0x05e01000 0x83208>,
- <0x05eb0000 0x3000>;
+ reg = <0x0 0x05e01000 0x0 0x83208>,
+ <0x0 0x05eb0000 0x0 0x3000>;
reg-names = "mdp", "vbif";
interrupt-parent = <&mdss>;
@@ -1348,7 +1351,7 @@ opp-400000000 {
mdss_dsi0: dsi@5e94000 {
compatible = "qcom,sm6125-dsi-ctrl", "qcom,mdss-dsi-ctrl";
- reg = <0x05e94000 0x400>;
+ reg = <0x0 0x05e94000 0x0 0x400>;
reg-names = "dsi_ctrl";
interrupt-parent = <&mdss>;
@@ -1417,9 +1420,9 @@ opp-187500000 {
mdss_dsi0_phy: phy@5e94400 {
compatible = "qcom,sm6125-dsi-phy-14nm";
- reg = <0x05e94400 0x100>,
- <0x05e94500 0x300>,
- <0x05e94800 0x188>;
+ reg = <0x0 0x05e94400 0x0 0x100>,
+ <0x0 0x05e94500 0x0 0x300>,
+ <0x0 0x05e94800 0x0 0x188>;
reg-names = "dsi_phy",
"dsi_phy_lane",
"dsi_pll";
@@ -1441,7 +1444,7 @@ mdss_dsi0_phy: phy@5e94400 {
dispcc: clock-controller@5f00000 {
compatible = "qcom,sm6125-dispcc";
- reg = <0x05f00000 0x20000>;
+ reg = <0x0 0x05f00000 0x0 0x20000>;
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
<&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
@@ -1470,7 +1473,7 @@ dispcc: clock-controller@5f00000 {
apps_smmu: iommu@c600000 {
compatible = "qcom,sm6125-smmu-500", "qcom,smmu-500", "arm,mmu-500";
- reg = <0x0c600000 0x80000>;
+ reg = <0x0 0x0c600000 0x0 0x80000>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
@@ -1544,74 +1547,74 @@ apps_smmu: iommu@c600000 {
apcs_glb: mailbox@f111000 {
compatible = "qcom,sm6125-apcs-hmss-global",
"qcom,msm8994-apcs-kpss-global";
- reg = <0x0f111000 0x1000>;
+ reg = <0x0 0x0f111000 0x0 0x1000>;
#mbox-cells = <1>;
};
timer@f120000 {
compatible = "arm,armv7-timer-mem";
- #address-cells = <1>;
+ #address-cells = <2>;
#size-cells = <1>;
- ranges;
- reg = <0x0f120000 0x1000>;
+ reg = <0x0 0x0f120000 0x0 0x1000>;
+ ranges = <0x0 0x0 0x0 0x0 0x20000000>;
clock-frequency = <19200000>;
frame@f121000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0f121000 0x1000>,
- <0x0f122000 0x1000>;
+ reg = <0x0 0x0f121000 0x1000>,
+ <0x0 0x0f122000 0x1000>;
};
frame@f123000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0f123000 0x1000>;
+ reg = <0x0 0x0f123000 0x1000>;
status = "disabled";
};
frame@f124000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0f124000 0x1000>;
+ reg = <0x0 0x0f124000 0x1000>;
status = "disabled";
};
frame@f125000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0f125000 0x1000>;
+ reg = <0x0 0x0f125000 0x1000>;
status = "disabled";
};
frame@f126000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0f126000 0x1000>;
+ reg = <0x0 0x0f126000 0x1000>;
status = "disabled";
};
frame@f127000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0f127000 0x1000>;
+ reg = <0x0 0x0f127000 0x1000>;
status = "disabled";
};
frame@f128000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0f128000 0x1000>;
+ reg = <0x0 0x0f128000 0x1000>;
status = "disabled";
};
};
intc: interrupt-controller@f200000 {
compatible = "arm,gic-v3";
- reg = <0x0f200000 0x20000>,
- <0x0f300000 0x100000>;
+ reg = <0x0 0x0f200000 0x0 0x20000>,
+ <0x0 0x0f300000 0x0 0x100000>;
#interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
--
2.53.0© 2016 - 2026 Red Hat, Inc.