Based on the following pages in the User Manuals, the MTU3 block does
not have a TCIU8 interrupt, only a TCIV8 interrupt, as the row where
TCIU8 should have been is marked as reserved, and the GIC SPI numbers
stop at 212.
* Page 486, Table 8.2 Interrupt mapping (7/13) in the Renesas RZ/G2UL
Rev.1.40 User Manual
* Page 363, Table 8.2 Interrupt Mapping (6/13) in the Renesas RZ/Five
Rev.1.30 User Manual
* Page 528, Table 8.2 Interrupt mapping (7/13) in the Renesas RZ/G2L
and RZ/G2LC Rev.1.50 User Manual
* Page 540, Table 8.2 Interrupt mapping (7/13) in the Renesas RZ/V2L
Rev.1.50 User Manual
Remove the TCIU8 interrupt.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
---
.../devicetree/bindings/timer/renesas,rz-mtu3.yaml | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml b/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml
index 3ad10c5b66ba..00cd5cbcf6e9 100644
--- a/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml
+++ b/Documentation/devicetree/bindings/timer/renesas,rz-mtu3.yaml
@@ -162,7 +162,6 @@ properties:
- description: MTU8.TGRC input capture/compare match
- description: MTU8.TGRD input capture/compare match
- description: MTU8.TCNT overflow
- - description: MTU8.TCNT underflow
interrupt-names:
items:
@@ -209,7 +208,6 @@ properties:
- const: tgic8
- const: tgid8
- const: tciv8
- - const: tciu8
clocks:
maxItems: 1
@@ -287,8 +285,7 @@ examples:
<GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 210 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 211 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>;
+ <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", "tciv0", "tgie0",
"tgif0",
"tgia1", "tgib1", "tciv1", "tciu1",
@@ -298,7 +295,7 @@ examples:
"tgiu5", "tgiv5", "tgiw5",
"tgia6", "tgib6", "tgic6", "tgid6", "tciv6",
"tgia7", "tgib7", "tgic7", "tgid7", "tciv7",
- "tgia8", "tgib8", "tgic8", "tgid8", "tciv8", "tciu8";
+ "tgia8", "tgib8", "tgic8", "tgid8", "tciv8";
clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>;
power-domains = <&cpg>;
resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>;
--
2.53.0