Convert Atmel High-Speed USB Device Controller (USBA) binding to DT schema.
Changes during conversion:
- Make the "clock-names" property flexible enough to accept the items
in any order as the existing in tree DTS nodes doesn't follow an order.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
---
.../bindings/usb/atmel,at91sam9rl-udc.yaml | 74 ++++++++++++++++++++++
.../devicetree/bindings/usb/atmel-usb.txt | 46 --------------
2 files changed, 74 insertions(+), 46 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/atmel,at91sam9rl-udc.yaml b/Documentation/devicetree/bindings/usb/atmel,at91sam9rl-udc.yaml
new file mode 100644
index 000000000000..cdbbd17f8036
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/atmel,at91sam9rl-udc.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/atmel,at91sam9rl-udc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel High-Speed USB Device Controller (USBA)
+
+maintainers:
+ - Nicolas Ferre <nicolas.ferre@microchip.com>
+ - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+description:
+ The Atmel High-Speed USB Device Controller (USBA) provides USB 2.0
+ high-speed gadget functionality on several Atmel and Microchip SoCs.
+ The controller requires a peripheral clock and a host clock for operation
+ and may optionally use a GPIO to detect VBUS presence.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - atmel,at91sam9rl-udc
+ - atmel,at91sam9g45-udc
+ - atmel,sama5d3-udc
+ - items:
+ - const: microchip,lan9662-udc
+ - const: atmel,sama5d3-udc
+ - const: microchip,sam9x60-udc
+
+ reg:
+ maxItems: 2
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ minItems: 2
+ maxItems: 2
+ items:
+ enum: [pclk, hclk]
+
+ atmel,vbus-gpio:
+ description: GPIO used to detect the presence of VBUS, indicating that
+ the USB cable is connected.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/clock/at91.h>
+ #include <dt-bindings/gpio/gpio.h>
+ gadget@fff78000 {
+ compatible = "atmel,at91sam9g45-udc";
+ reg = <0x00600000 0x80000
+ 0xfff78000 0x400>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+ clock-names = "pclk", "hclk";
+ atmel,vbus-gpio = <&pioC 15 GPIO_ACTIVE_HIGH>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
deleted file mode 100644
index ab353576d1de..000000000000
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Atmel SOC USB controllers
-
-Atmel High-Speed USB device controller
-
-Required properties:
- - compatible: Should be one of the following
- "atmel,at91sam9rl-udc"
- "atmel,at91sam9g45-udc"
- "atmel,sama5d3-udc"
- "microchip,sam9x60-udc"
- "microchip,lan9662-udc"
- For "microchip,lan9662-udc" the fallback "atmel,sama5d3-udc"
- is required.
- - reg: Address and length of the register set for the device
- - interrupts: Should contain usba interrupt
- - clocks: Should reference the peripheral and host clocks
- - clock-names: Should contain two strings
- "pclk" for the peripheral clock
- "hclk" for the host clock
-
-Deprecated property:
- - ep childnode: To specify the number of endpoints and their properties.
-
-Optional properties:
- - atmel,vbus-gpio: If present, specifies a gpio that allows to detect whether
- vbus is present (USB is connected).
-
-Deprecated child node properties:
- - name: Name of the endpoint.
- - reg: Num of the endpoint.
- - atmel,fifo-size: Size of the fifo.
- - atmel,nb-banks: Number of banks.
- - atmel,can-dma: Boolean to specify if the endpoint support DMA.
- - atmel,can-isoc: Boolean to specify if the endpoint support ISOC.
-
-usb2: gadget@fff78000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "atmel,at91sam9rl-udc";
- reg = <0x00600000 0x80000
- 0xfff78000 0x400>;
- interrupts = <27 4 0>;
- clocks = <&utmi>, <&udphs_clk>;
- clock-names = "hclk", "pclk";
- atmel,vbus-gpio = <&pioB 19 0>;
-};
--
2.53.0