From: Sibi Sankar <sibi.sankar@oss.qualcomm.com>

Add embedded controller node for Hamoa IOT EVK boards which adds fan
control, temperature sensors, access to EC internal state changes and
suspend entry/exit notifications to the EC.

Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
Tested-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
Co-developed-by: Anvesh Jain P <anvesh.p@oss.qualcomm.com>
Signed-off-by: Anvesh Jain P <anvesh.p@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
index 460f27dcd6f6..a0d2ccf931ec 100644
--- a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
+++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
@@ -831,6 +831,16 @@ eusb6_repeater: redriver@4f {
 		pinctrl-0 = <&eusb6_reset_n>;
 		pinctrl-names = "default";
 	};
+
+	embedded-controller@76 {
+		compatible = "qcom,hamoa-iot-evk-ec", "qcom,hamoa-crd-ec";
+		reg = <0x76>;
+
+		interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&ec_int_n_default>;
+		pinctrl-names = "default";
+	};
 };
 
 &i2c7 {
@@ -1320,6 +1330,12 @@ right_tweeter: speaker@0,1 {
 };
 
 &tlmm {
+	ec_int_n_default: ec-int-n-state {
+		pins = "gpio66";
+		function = "gpio";
+		bias-disable;
+	};
+
 	edp_reg_en: edp-reg-en-state {
 		pins = "gpio70";
 		function = "gpio";

-- 
2.34.1