The SyncE_Ref pin may operate as either an active or inactive reference
depending on board design and system configuration. Some platforms need
to disable the SyncE reference dynamically (e.g., when selecting a
different recovered clock input). The hardware supports toggling this
pin, therefore advertise the STATE_CAN_CHANGE capability.
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
---
drivers/dpll/zl3073x/prop.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/dpll/zl3073x/prop.c b/drivers/dpll/zl3073x/prop.c
index ac9d41d0f978..acd7061a741a 100644
--- a/drivers/dpll/zl3073x/prop.c
+++ b/drivers/dpll/zl3073x/prop.c
@@ -215,6 +215,15 @@ struct zl3073x_pin_props *zl3073x_pin_props_get(struct zl3073x_dev *zldev,
props->dpll_props.type = DPLL_PIN_TYPE_GNSS;
+ /*
+ * The SyncE_Ref pin supports enabling/disabling dynamically.
+ * Some platforms may choose to expose this through firmware
+ * configuration later. For now, advertise this capability
+ * universally since the hardware allows state toggling.
+ */
+ props->dpll_props.capabilities |=
+ DPLL_PIN_CAPABILITIES_STATE_CAN_CHANGE;
+
/* The output pin phase adjustment granularity equals half of
* the synth frequency count.
*/
--
2.39.3