Hopper and Blackwell GPUs use a different PCI config space mirror
address (0x088000) compared to older architectures (0x088480). Update
SetSystemInfo to accept a chipset parameter and select the correct
address based on architecture.

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
 drivers/gpu/nova-core/gsp/boot.rs        |  2 +-
 drivers/gpu/nova-core/gsp/commands.rs    |  8 +++++---
 drivers/gpu/nova-core/gsp/fw/commands.rs | 22 +++++++++++++++++++---
 3 files changed, 25 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/nova-core/gsp/boot.rs b/drivers/gpu/nova-core/gsp/boot.rs
index abb8ca7ce38b..3afee0ffc3d9 100644
--- a/drivers/gpu/nova-core/gsp/boot.rs
+++ b/drivers/gpu/nova-core/gsp/boot.rs
@@ -254,7 +254,7 @@ pub(crate) fn boot(
         let wpr_meta = Coherent::init(dev, GFP_KERNEL, GspFwWprMeta::new(&gsp_fw, &fb_layout))?;
 
         self.cmdq
-            .send_command_no_wait(bar, commands::SetSystemInfo::new(pdev))?;
+            .send_command_no_wait(bar, commands::SetSystemInfo::new(pdev, chipset))?;
         self.cmdq
             .send_command_no_wait(bar, commands::SetRegistry::new())?;
 
diff --git a/drivers/gpu/nova-core/gsp/commands.rs b/drivers/gpu/nova-core/gsp/commands.rs
index c89c7b57a751..9551a789433c 100644
--- a/drivers/gpu/nova-core/gsp/commands.rs
+++ b/drivers/gpu/nova-core/gsp/commands.rs
@@ -19,6 +19,7 @@
 
 use crate::{
     driver::Bar0,
+    gpu::Chipset,
     gsp::{
         cmdq::{
             Cmdq,
@@ -37,12 +38,13 @@
 /// The `GspSetSystemInfo` command.
 pub(crate) struct SetSystemInfo<'a> {
     pdev: &'a pci::Device<device::Bound>,
+    chipset: Chipset,
 }
 
 impl<'a> SetSystemInfo<'a> {
     /// Creates a new `GspSetSystemInfo` command using the parameters of `pdev`.
-    pub(crate) fn new(pdev: &'a pci::Device<device::Bound>) -> Self {
-        Self { pdev }
+    pub(crate) fn new(pdev: &'a pci::Device<device::Bound>, chipset: Chipset) -> Self {
+        Self { pdev, chipset }
     }
 }
 
@@ -53,7 +55,7 @@ impl<'a> CommandToGsp for SetSystemInfo<'a> {
     type InitError = Error;
 
     fn init(&self) -> impl Init<Self::Command, Self::InitError> {
-        GspSetSystemInfo::init(self.pdev)
+        GspSetSystemInfo::init(self.pdev, self.chipset)
     }
 }
 
diff --git a/drivers/gpu/nova-core/gsp/fw/commands.rs b/drivers/gpu/nova-core/gsp/fw/commands.rs
index db46276430be..c16acbb0237f 100644
--- a/drivers/gpu/nova-core/gsp/fw/commands.rs
+++ b/drivers/gpu/nova-core/gsp/fw/commands.rs
@@ -10,7 +10,13 @@
     }, //
 };
 
-use crate::gsp::GSP_PAGE_SIZE;
+use crate::{
+    gpu::{
+        Architecture,
+        Chipset, //
+    },
+    gsp::GSP_PAGE_SIZE, //
+};
 
 use super::bindings;
 
@@ -24,7 +30,10 @@ pub(crate) struct GspSetSystemInfo {
 impl GspSetSystemInfo {
     /// Returns an in-place initializer for the `GspSetSystemInfo` command.
     #[allow(non_snake_case)]
-    pub(crate) fn init<'a>(dev: &'a pci::Device<device::Bound>) -> impl Init<Self, Error> + 'a {
+    pub(crate) fn init<'a>(
+        dev: &'a pci::Device<device::Bound>,
+        chipset: Chipset,
+    ) -> impl Init<Self, Error> + 'a {
         type InnerGspSystemInfo = bindings::GspSystemInfo;
         let init_inner = try_init!(InnerGspSystemInfo {
             gpuPhysAddr: dev.resource_start(0)?,
@@ -35,7 +44,14 @@ pub(crate) fn init<'a>(dev: &'a pci::Device<device::Bound>) -> impl Init<Self, E
             // Using TASK_SIZE in r535_gsp_rpc_set_system_info() seems wrong because
             // TASK_SIZE is per-task. That's probably a design issue in GSP-RM though.
             maxUserVa: (1 << 47) - 4096,
-            pciConfigMirrorBase: 0x088000,
+            // Hopper, Blackwell, and later moved the PCI config mirror window to 0x092000.
+            // Older architectures continue to use the legacy window at 0x088000.
+            pciConfigMirrorBase: match chipset.arch() {
+                Architecture::Turing | Architecture::Ampere | Architecture::Ada => 0x088000,
+                Architecture::Hopper
+                | Architecture::BlackwellGB10x
+                | Architecture::BlackwellGB20x => 0x092000,
+            },
             pciConfigMirrorSize: 0x001000,
 
             PCIDeviceID: (u32::from(dev.device_id()) << 16) | u32::from(dev.vendor_id().as_raw()),
-- 
2.53.0