Inspiron14 has a ov02e10 sensor on CSIPHY4. Enable the list of dependencies
now.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi | 61 +++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi b/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi
index bf04a12b16bc9..e31f69fa43854 100644
--- a/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
 #include "hamoa-pmics.dtsi"
@@ -792,6 +793,66 @@ vreg_l3j_0p8: ldo3 {
 	};
 };
 
+&camss {
+	status = "okay";
+
+	ports {
+		/*
+		 * port0 => csiphy0
+		 * port1 => csiphy1
+		 * port2 => csiphy2
+		 * port3 => csiphy4
+		 */
+		port@3 {
+			camss_csiphy4_inep0: endpoint@0 {
+				clock-lanes = <7>;
+				data-lanes = <0 1>;
+				remote-endpoint = <&ov02e10_ep>;
+			};
+		};
+	};
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c1 {
+	camera@10 {
+		compatible = "ovti,ov02e10";
+		reg = <0x10>;
+
+		reset-gpios = <&tlmm 237 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cam_rgb_default>;
+
+		clocks = <&camcc CAM_CC_MCLK4_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK4_CLK>;
+		assigned-clock-rates = <19200000>;
+
+		orientation = <0>; /* front facing */
+
+		avdd-supply = <&vreg_l7b_2p8>;
+		dvdd-supply = <&vreg_l7b_2p8>;
+		dovdd-supply = <&vreg_cam_1p8>;
+
+		port {
+			ov02e10_ep: endpoint {
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <360000000>;
+				remote-endpoint = <&camss_csiphy4_inep0>;
+			};
+		};
+	};
+};
+
+&csiphy4 {
+	vdda-0p9-supply = <&vreg_l2c_0p8>;
+	vdda-1p2-supply = <&vreg_l1c_1p2>;
+
+	status = "okay";
+};
+
 &i2c0 {
 	clock-frequency = <400000>;
 

-- 
2.52.0