The logic is not complex but might be reused to cleanup a bit the
section by moving it to a dedicated helper.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/spi/winbond.c | 31 +++++++++++++++++--------------
 1 file changed, 17 insertions(+), 14 deletions(-)

diff --git a/drivers/mtd/nand/spi/winbond.c b/drivers/mtd/nand/spi/winbond.c
index b30a343a6672..ffbcd25b0366 100644
--- a/drivers/mtd/nand/spi/winbond.c
+++ b/drivers/mtd/nand/spi/winbond.c
@@ -421,30 +421,33 @@ static int w25n0xjw_set_sr4_hs(struct spinand_device *spinand, bool enable)
 	return spinand_write_reg_op(spinand, W25N0XJW_SR4, sr4);
 }
 
+/*
+ * SDR dual and quad I/O operations over 104MHz require the HS bit to
+ * enable a few more dummy cycles.
+ */
+static bool w25n0xjw_op_needs_hs(const struct spi_mem_op *op)
+{
+	if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr)
+		return false;
+	else if (op->cmd.buswidth != 1 || op->addr.buswidth == 1)
+		return false;
+	else if (op->max_freq && op->max_freq <= 104 * HZ_PER_MHZ)
+		return false;
+
+	return true;
+}
+
 static int w25n0xjw_hs_cfg(struct spinand_device *spinand,
 			   enum spinand_bus_interface iface)
 {
 	const struct spi_mem_op *op;
-	bool hs;
 
 	if (iface != SSDR)
 		return -EOPNOTSUPP;
 
-	/*
-	 * SDR dual and quad I/O operations over 104MHz require the HS bit to
-	 * enable a few more dummy cycles.
-	 */
 	op = spinand->op_templates->read_cache;
-	if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr)
-		hs = false;
-	else if (op->cmd.buswidth != 1 || op->addr.buswidth == 1)
-		hs = false;
-	else if (op->max_freq && op->max_freq <= 104 * HZ_PER_MHZ)
-		hs = false;
-	else
-		hs = true;
 
-	return w25n0xjw_set_sr4_hs(spinand, hs);
+	return w25n0xjw_set_sr4_hs(spinand, w25n0xjw_op_needs_hs(op));
 }
 
 static int w35n0xjw_write_vcr(struct spinand_device *spinand, u8 reg, u8 val)

-- 
2.51.1