From: Peng Fan <peng.fan@nxp.com>
PMIC_nINT is low level triggered, but the current PAD settings is
PE=0,PUE=0,FSEL_1_FAST_SLEW_RATE=1,SION=1. So PAD needs to be configured
as PULL UP with PULL Enable, no need SION. Correct it.
Fixes: 8d6712695bc8e ("arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK2")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index f8303b7e2bd22b9529d5f3063894d1cdd5556d59..0a6a60670f762f1400653d1e7d0f4c0fcaf6bcd4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -989,7 +989,7 @@ MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x22
pinctrl_pmic: dhcom-pmic-grp {
fsl,pins = <
/* PMIC_nINT */
- MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x40000090
+ MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x1c0
>;
};
--
2.37.1