From: Francesco Dolcini <francesco.dolcini@toradex.com>
Add Zinnia Carrier Board mated with Verdin AM62.
It features 1 x RS232, 1 x RS485, 1 x CAN, 3 x isolated digital I/O,
2 x 1GBit/s Ethernet, a mini PCIe slot with USB / SIM card connector
for a modem, USB and SD card interfaces.
Link: https://www.toradex.com/products/carrier-board/zinnia-carrier-board
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
---
arch/arm64/boot/dts/ti/Makefile | 2 +
.../boot/dts/ti/k3-am62-verdin-zinnia.dtsi | 493 ++++++++++++++++++
.../dts/ti/k3-am625-verdin-nonwifi-zinnia.dts | 22 +
.../dts/ti/k3-am625-verdin-wifi-zinnia.dts | 22 +
4 files changed, 539 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am62-verdin-zinnia.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-zinnia.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-zinnia.dts
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 260e211ca277..08f325451038 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -19,11 +19,13 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-dev.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-ivy.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-mallow.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-yavia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-nonwifi-zinnia.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-ivy.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-mallow.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-zinnia.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am62x-phyboard-lyra-gpio-fan.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk-nand.dtbo
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-zinnia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-zinnia.dtsi
new file mode 100644
index 000000000000..0ce8357797ed
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-zinnia.dtsi
@@ -0,0 +1,493 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * Common dtsi for Verdin AM62 SoM on Zinnia carrier board
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/zinnia-carrier-board
+ */
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_zinnia_leds>;
+
+ /* LED1 Red - SODIMM 48 - LED1_R */
+ led-0 {
+ color = <LED_COLOR_ID_RED>;
+ default-state = "off";
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <1>;
+ gpios = <&main_gpio0 33 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* LED1 Blue - SODIMM 46 - LED1_B */
+ led-1 {
+ color = <LED_COLOR_ID_BLUE>;
+ default-state = "off";
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <1>;
+ gpios = <&main_gpio0 34 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* LED3 Red - SODIMM 44 - LED3_R */
+ led-2 {
+ color = <LED_COLOR_ID_RED>;
+ default-state = "off";
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <3>;
+ gpios = <&main_gpio0 37 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* LED3 Green - SODIMM 54 - LED3_G */
+ led-3 {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <3>;
+ gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* LED3 Blue - SODIMM 36 - LED3_B */
+ led-4 {
+ color = <LED_COLOR_ID_BLUE>;
+ default-state = "off";
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <3>;
+ gpios = <&main_gpio1 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* LED4 Red - SODIMM 34 - LED4_R */
+ led-5 {
+ color = <LED_COLOR_ID_RED>;
+ default-state = "off";
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <4>;
+ gpios = <&main_gpio1 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* LED4 Green - SODIMM 32 - LED4_G */
+ led-6 {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <4>;
+ gpios = <&main_gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* LED4 Blue - SODIMM 30 - LED4_B */
+ led-7 {
+ color = <LED_COLOR_ID_BLUE>;
+ default-state = "off";
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <4>;
+ gpios = <&main_gpio1 11 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ zinnia-1v8-voltage {
+ compatible = "voltage-divider";
+ /* Verdin ADC_4 */
+ io-channels = <&verdin_som_adc 4>;
+ full-ohms = <39000>; /* 12K + 27K */
+ output-ohms = <27000>;
+ };
+
+ zinnia-3v3-voltage {
+ compatible = "voltage-divider";
+ /* Verdin ADC_3 */
+ io-channels = <&verdin_som_adc 5>;
+ full-ohms = <54000>; /* 27K + 27K */
+ output-ohms = <27000>;
+ };
+
+ zinnia-5v-voltage {
+ compatible = "voltage-divider";
+ /* Verdin ADC_2 */
+ io-channels = <&verdin_som_adc 6>;
+ full-ohms = <39000>; /* 27K + 12K */
+ output-ohms = <12000>;
+ };
+
+ /* Zinnia Power Supply Input Voltage */
+ zinnia-input-voltage {
+ compatible = "voltage-divider";
+ /* Verdin ADC_1 */
+ io-channels = <&verdin_som_adc 7>;
+ full-ohms = <204700>; /* 200K + 4.7K */
+ output-ohms = <4700>;
+ };
+};
+
+&main_pmx0 {
+ pinctrl_zinnia_leds: zinnia-leds-default-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x019c, PIN_INPUT, 7) /* (B18) MCASP0_AXR1.GPIO1_9 */ /* SODIMM 36 */
+ AM62X_IOPAD(0x01a0, PIN_INPUT, 7) /* (B20) MCASP0_AXR0.GPIO1_10 */ /* SODIMM 34 */
+ AM62X_IOPAD(0x01a4, PIN_INPUT, 7) /* (A19) MCASP0_ACLKX.GPIO1_11 */ /* SODIMM 30 */
+ AM62X_IOPAD(0x01a8, PIN_INPUT, 7) /* (A20) MCASP0_AFSX.GPIO1_12 */ /* SODIMM 32 */
+ AM62X_IOPAD(0x0088, PIN_INPUT, 7) /* (L17) GPMC0_OEn_REn.GPIO0_33 */ /* SODIMM 48 */
+ AM62X_IOPAD(0x0098, PIN_INPUT, 7) /* (R18) GPMC0_WAIT0.GPIO0_37 */ /* SODIMM 44 */
+ AM62X_IOPAD(0x008c, PIN_INPUT, 7) /* (L25) GPMC0_WEn.GPIO0_34 */ /* SODIMM 46 */
+ AM62X_IOPAD(0x002c, PIN_INPUT, 7) /* (F23) OSPI0_CSn0.GPIO0_11 */ /* SODIMM 54 */
+ >;
+ };
+};
+
+&mcu_pmx0 {
+ pinctrl_zinnia_spi1_cs0_gpio: mcu-gpio0-11-default-pins {
+ pinctrl-single,pins = <
+ AM62X_MCU_IOPAD(0x002c, PIN_INPUT, 7) /* (C6) WKUP_UART0_CTSn.GPIO0_11 */ /* SODIMM 143 */
+ >;
+ };
+};
+
+/* Verdin ETH */
+&cpsw3g {
+ status = "okay";
+};
+
+/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
+&cpsw3g_mdio {
+ status = "okay";
+
+ cpsw3g_phy1: ethernet-phy@2 {
+ reg = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eth2_rgmii_int>;
+ interrupt-parent = <&main_gpio0>;
+ interrupts = <38 IRQ_TYPE_EDGE_FALLING>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+ };
+};
+
+/* Verdin ETH_1 */
+&cpsw_port1 {
+ status = "okay";
+};
+
+/* Verdin ETH_2_RGMII */
+&cpsw_port2 {
+ phy-handle = <&cpsw3g_phy1>;
+ phy-mode = "rgmii-id";
+
+ status = "okay";
+};
+
+&main_gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ctrl_sleep_moci>,
+ <&pinctrl_gpio_5>,
+ <&pinctrl_gpio_6>,
+ <&pinctrl_gpio_7>,
+ <&pinctrl_gpio_8>,
+ <&pinctrl_qspi1_io0_gpio>;
+ gpio-line-names =
+ "", /* 0 */
+ "",
+ "",
+ "DI3_RB", /* SODIMM 56 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 10 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 20 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 30 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "DI2_EN", /* SODIMM 218 */
+ "",
+ "",
+ "",
+ "DI2_RB", /* SODIMM 216 */ /* 40 */
+ "DO3_EN", /* SODIMM 220 */
+ "DI3_EN", /* SODIMM 222 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 50 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 60 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 70 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 80 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "";
+};
+
+&main_gpio1 {
+ gpio-line-names =
+ "", /* 0 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 10 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 20 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 30 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 40 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 50 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 60 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 70 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "", /* 80 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "";
+};
+
+/* Verdin I2C_1 */
+&main_i2c1 {
+ status = "okay";
+
+ temperature-sensor@4f {
+ compatible = "ti,tmp1075";
+ reg = <0x4f>;
+ };
+
+ eeprom@57 {
+ compatible = "st,24c02", "atmel,24c02";
+ reg = <0x57>;
+ pagesize = <16>;
+ };
+};
+
+/* Verdin CAN_1 */
+&main_mcan0 {
+ status = "okay";
+};
+
+/* Verdin SPI_1 */
+&main_spi1 {
+ pinctrl-0 = <&pinctrl_spi1>,
+ <&pinctrl_zinnia_spi1_cs0_gpio>,
+ <&pinctrl_spi1_cs_gpio>;
+ cs-gpios = <&mcu_gpio0 11 GPIO_ACTIVE_LOW>,
+ <&main_gpio0 7 GPIO_ACTIVE_LOW>;
+
+ status = "okay";
+
+ tpm@1 {
+ compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+ reg = <1>;
+ spi-max-frequency = <18500000>;
+ };
+};
+
+/* Verdin UART_3 */
+&main_uart0 {
+ status = "okay";
+};
+
+/* Verdin UART_1 */
+&main_uart1 {
+ status = "okay";
+};
+
+&mcu_gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_1>,
+ <&pinctrl_gpio_2>,
+ <&pinctrl_gpio_3>,
+ <&pinctrl_gpio_4>,
+ <&pinctrl_pcie_1_reset>;
+ gpio-line-names =
+ "",
+ "DO1_EN", /* SODIMM 206 */
+ "DI1_EN", /* SODIMM 208 */
+ "DI1_RB", /* SODIMM 210 */
+ "DO2_EN", /* SODIMM 212 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "";
+};
+
+/* Verdin SD_1 */
+&sdhci1 {
+ status = "okay";
+};
+
+/* Verdin USB_1 */
+&usb0 {
+ status = "okay";
+};
+
+/* Verdin USB_2 */
+&usb1 {
+ status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbss0 {
+ status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbss1 {
+ status = "okay";
+};
+
+/* Verdin PCIE_1_RESET# */
+&verdin_pcie_1_reset_hog {
+ status = "okay";
+};
+
+/* Verdin UART_2 */
+&wkup_uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wkup_uart0>, <&pinctrl_wkup_uart0_rts>;
+ rs485-rts-active-low;
+ rs485-rx-during-tx;
+ linux,rs485-enabled-at-boot-time;
+
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-zinnia.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-zinnia.dts
new file mode 100644
index 000000000000..eba8d7a5b1bf
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-nonwifi-zinnia.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/zinnia-carrier-board
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-nonwifi.dtsi"
+#include "k3-am62-verdin-zinnia.dtsi"
+
+/ {
+ model = "Toradex Verdin AM62 on Zinnia Board";
+ compatible = "toradex,verdin-am62-nonwifi-zinnia",
+ "toradex,verdin-am62-nonwifi",
+ "toradex,verdin-am62",
+ "ti,am625";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-zinnia.dts b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-zinnia.dts
new file mode 100644
index 000000000000..6f3f8eb42ed6
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-verdin-wifi-zinnia.dts
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) Toradex
+ *
+ * https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62
+ * https://www.toradex.com/products/carrier-board/zinnia-carrier-board
+ */
+
+/dts-v1/;
+
+#include "k3-am625.dtsi"
+#include "k3-am62-verdin.dtsi"
+#include "k3-am62-verdin-wifi.dtsi"
+#include "k3-am62-verdin-zinnia.dtsi"
+
+/ {
+ model = "Toradex Verdin AM62 WB on Zinnia Board";
+ compatible = "toradex,verdin-am62-wifi-zinnia",
+ "toradex,verdin-am62-wifi",
+ "toradex,verdin-am62",
+ "ti,am625";
+};
--
2.47.3© 2016 - 2026 Red Hat, Inc.