We keep a reference to our the struct device in the socfpga_dwmac priv
structure, but now it's only ever used to produce logs in the
.set_phy_mode() ops, that are specific to this driver.
When we call that ops, we always have a ref to the struct device around,
so let's pass it to .set_phy_mode(). We can now discard that reference
from struct socfpga_dwmac.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
.../net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index ae40de2ed8eb..1d7f0a57d288 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -53,14 +53,14 @@
struct socfpga_dwmac;
struct socfpga_dwmac_ops {
- int (*set_phy_mode)(struct socfpga_dwmac *dwmac_priv);
+ int (*set_phy_mode)(struct socfpga_dwmac *dwmac_priv,
+ struct device *dev);
void (*setup_plat_dat)(struct socfpga_dwmac *dwmac_priv);
};
struct socfpga_dwmac {
u32 reg_offset;
u32 reg_shift;
- struct device *dev;
struct plat_stmmacenet_data *plat_dat;
struct regmap *sys_mgr_base_addr;
struct reset_control *stmmac_rst;
@@ -243,7 +243,6 @@ static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *
dwmac->reg_offset = reg_offset;
dwmac->reg_shift = reg_shift;
dwmac->sys_mgr_base_addr = sys_mgr_base_addr;
- dwmac->dev = dev;
of_node_put(np_sgmii_adapter);
return 0;
@@ -382,7 +381,8 @@ static int smtg_crosststamp(ktime_t *device, struct system_counterval_t *system,
return 0;
}
-static int socfpga_gen5_set_phy_mode(struct socfpga_dwmac *dwmac)
+static int socfpga_gen5_set_phy_mode(struct socfpga_dwmac *dwmac,
+ struct device *dev)
{
struct regmap *sys_mgr_base_addr = dwmac->sys_mgr_base_addr;
phy_interface_t phymode = socfpga_get_plat_phymode(dwmac);
@@ -391,7 +391,7 @@ static int socfpga_gen5_set_phy_mode(struct socfpga_dwmac *dwmac)
u32 ctrl, val, module;
if (socfpga_set_phy_mode_common(phymode, &val)) {
- dev_err(dwmac->dev, "bad phy mode %d\n", phymode);
+ dev_err(dev, "bad phy mode %d\n", phymode);
return -EINVAL;
}
@@ -440,7 +440,8 @@ static int socfpga_gen5_set_phy_mode(struct socfpga_dwmac *dwmac)
return 0;
}
-static int socfpga_gen10_set_phy_mode(struct socfpga_dwmac *dwmac)
+static int socfpga_gen10_set_phy_mode(struct socfpga_dwmac *dwmac,
+ struct device *dev)
{
struct regmap *sys_mgr_base_addr = dwmac->sys_mgr_base_addr;
phy_interface_t phymode = socfpga_get_plat_phymode(dwmac);
@@ -552,7 +553,7 @@ static int socfpga_dwmac_init(struct device *dev, void *bsp_priv)
{
struct socfpga_dwmac *dwmac = bsp_priv;
- return dwmac->ops->set_phy_mode(dwmac);
+ return dwmac->ops->set_phy_mode(dwmac, dev);
}
static void socfpga_gen5_setup_plat_dat(struct socfpga_dwmac *dwmac)
--
2.49.0
On Tue, Mar 24, 2026 at 10:21:00AM +0100, Maxime Chevallier wrote:
> We keep a reference to our the struct device in the socfpga_dwmac priv
> structure, but now it's only ever used to produce logs in the
> .set_phy_mode() ops, that are specific to this driver.
>
> When we call that ops, we always have a ref to the struct device around,
> so let's pass it to .set_phy_mode(). We can now discard that reference
> from struct socfpga_dwmac.
>
> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> ---
> .../net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 15 ++++++++-------
> 1 file changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
> index ae40de2ed8eb..1d7f0a57d288 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
> @@ -53,14 +53,14 @@
>
> struct socfpga_dwmac;
> struct socfpga_dwmac_ops {
> - int (*set_phy_mode)(struct socfpga_dwmac *dwmac_priv);
> + int (*set_phy_mode)(struct socfpga_dwmac *dwmac_priv,
> + struct device *dev);
As you're changing the signature of this method, would it be more
sensible to put "struct device *dev" as the first arg, rather than
swapping the order below:
> @@ -552,7 +553,7 @@ static int socfpga_dwmac_init(struct device *dev, void *bsp_priv)
> {
> struct socfpga_dwmac *dwmac = bsp_priv;
>
> - return dwmac->ops->set_phy_mode(dwmac);
> + return dwmac->ops->set_phy_mode(dwmac, dev);
?
In either case:
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Thanks!
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
© 2016 - 2026 Red Hat, Inc.