The QCS615 Ride board has a SPI-NOR flash connected to the QSPI controller
on CS0. Enable the QSPI controller and add the corresponding SPI-NOR flash
node to allow the system to access it.

Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/qcs615-ride.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
index 5a24c19c415e..b096d96ab220 100644
--- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
@@ -516,6 +516,18 @@ &pon_resin {
 	status = "okay";
 };
 
+&qspi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };

-- 
2.34.1

On Tue, Mar 24, 2026 at 06:43:21PM +0530, Viken Dadhaniya wrote:
> The QCS615 Ride board has a SPI-NOR flash connected to the QSPI controller
> on CS0. Enable the QSPI controller and add the corresponding SPI-NOR flash
> node to allow the system to access it.
> 
> Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/qcs615-ride.dts | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>


-- 
With best wishes
Dmitry