Add fw_search.sh, a new selftest that validates the firmware_class.search=
module parameter using the existing test_firmware module's sysfs trigger
interface.

The test covers:
  - Firmware found in first/second/third search directory
  - Firmware not found in any search path
  - path= takes priority over search=
  - Empty search= does not break firmware loading
  - Sysfs readback matches what was written
  - Escaped colon (\:) in directory name
  - Escaped backslash (\\) in directory name
  - Escaped colon combined with multiple search paths

Signed-off-by: Jeff Layton <jlayton@kernel.org>
---
 tools/testing/selftests/firmware/Makefile     |   2 +-
 tools/testing/selftests/firmware/fw_search.sh | 222 ++++++++++++++++++++++++++
 2 files changed, 223 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/firmware/Makefile b/tools/testing/selftests/firmware/Makefile
index 7992969deaa2737ff2a033ffe60136b84ea2f3f0..42e5bd72886b3cd8f62ae42d53c1554e8a1b331c 100644
--- a/tools/testing/selftests/firmware/Makefile
+++ b/tools/testing/selftests/firmware/Makefile
@@ -3,7 +3,7 @@
 CFLAGS = -Wall \
          -O2
 
-TEST_PROGS := fw_run_tests.sh
+TEST_PROGS := fw_run_tests.sh fw_search.sh
 TEST_FILES := fw_fallback.sh fw_filesystem.sh fw_upload.sh fw_lib.sh
 TEST_GEN_FILES := fw_namespace
 
diff --git a/tools/testing/selftests/firmware/fw_search.sh b/tools/testing/selftests/firmware/fw_search.sh
new file mode 100755
index 0000000000000000000000000000000000000000..ec6873e54a4cc381771311be11203083b2531bf6
--- /dev/null
+++ b/tools/testing/selftests/firmware/fw_search.sh
@@ -0,0 +1,222 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test the firmware_class.search= module parameter, which allows
+# specifying multiple colon-separated firmware search directories.
+
+set -e
+
+TEST_REQS_FW_SYSFS_FALLBACK="no"
+TEST_REQS_FW_SET_CUSTOM_PATH="no"
+TEST_DIR=$(dirname $0)
+source $TEST_DIR/fw_lib.sh
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+SEARCH_SYSFS="/sys/module/firmware_class/parameters/search"
+PATH_SYSFS="/sys/module/firmware_class/parameters/path"
+
+check_mods
+check_setup
+verify_reqs
+
+if [ ! -f "$SEARCH_SYSFS" ]; then
+	echo "$0: search= parameter not available, skipping"
+	exit $ksft_skip
+fi
+
+# Save original values
+OLD_SEARCH="$(cat $SEARCH_SYSFS)"
+OLD_PATH="$(cat $PATH_SYSFS)"
+
+# Create temp directories for firmware
+FWDIR1=$(mktemp -d)
+FWDIR2=$(mktemp -d)
+FWDIR3=$(mktemp -d)
+
+FW_NAME="test-search-fw.bin"
+FW_CONTENT1="SEARCH_PATH_1"
+FW_CONTENT2="SEARCH_PATH_2"
+FW_CONTENT3="SEARCH_PATH_3"
+
+DIR=/sys/devices/virtual/misc/test_firmware
+
+cleanup()
+{
+	# Restore original values
+	if [ "$OLD_PATH" = "" ]; then
+		printf '\000' >$PATH_SYSFS
+	else
+		echo -n "$OLD_PATH" >$PATH_SYSFS
+	fi
+	if [ "$OLD_SEARCH" = "" ]; then
+		printf '\000' >$SEARCH_SYSFS
+	else
+		echo -n "$OLD_SEARCH" >$SEARCH_SYSFS
+	fi
+	rm -rf "$FWDIR1" "$FWDIR2" "$FWDIR3"
+}
+trap cleanup EXIT
+
+# Clear path= so search= is consulted
+printf '\000' >$PATH_SYSFS
+
+# Test 1: firmware found in first search path
+echo -n "$FW_CONTENT1" >"$FWDIR1/$FW_NAME"
+echo -n "$FWDIR1:$FWDIR2" >$SEARCH_SYSFS
+
+if ! echo -n "$FW_NAME" >$DIR/trigger_request; then
+	echo "$0: FAIL - could not trigger request for test 1" >&2
+	exit 1
+fi
+if ! diff -q "$FWDIR1/$FW_NAME" /dev/test_firmware >/dev/null; then
+	echo "$0: FAIL - firmware content mismatch in test 1" >&2
+	exit 1
+fi
+echo "$0: search path - first directory: OK"
+
+# Test 2: firmware found in second search path (not in first)
+rm -f "$FWDIR1/$FW_NAME"
+echo -n "$FW_CONTENT2" >"$FWDIR2/$FW_NAME"
+echo -n "$FWDIR1:$FWDIR2" >$SEARCH_SYSFS
+
+if ! echo -n "$FW_NAME" >$DIR/trigger_request; then
+	echo "$0: FAIL - could not trigger request for test 2" >&2
+	exit 1
+fi
+if ! diff -q "$FWDIR2/$FW_NAME" /dev/test_firmware >/dev/null; then
+	echo "$0: FAIL - firmware content mismatch in test 2" >&2
+	exit 1
+fi
+echo "$0: search path - second directory: OK"
+
+# Test 3: firmware not found in any search path
+rm -f "$FWDIR2/$FW_NAME"
+echo -n "$FWDIR1:$FWDIR2" >$SEARCH_SYSFS
+
+if echo -n "nonexistent-$FW_NAME" >$DIR/trigger_request 2>/dev/null; then
+	echo "$0: FAIL - firmware should not have been found in test 3" >&2
+	exit 1
+fi
+echo "$0: search path - not found: OK"
+
+# Test 4: path= takes priority over search=
+echo -n "$FW_CONTENT1" >"$FWDIR1/$FW_NAME"
+echo -n "$FW_CONTENT2" >"$FWDIR2/$FW_NAME"
+echo -n "$FWDIR1" >$PATH_SYSFS
+echo -n "$FWDIR2" >$SEARCH_SYSFS
+
+if ! echo -n "$FW_NAME" >$DIR/trigger_request; then
+	echo "$0: FAIL - could not trigger request for test 4" >&2
+	exit 1
+fi
+if ! diff -q "$FWDIR1/$FW_NAME" /dev/test_firmware >/dev/null; then
+	echo "$0: FAIL - path= should take priority over search= in test 4" >&2
+	exit 1
+fi
+echo "$0: search path - path= priority over search=: OK"
+
+# Clear path= again for remaining tests
+printf '\000' >$PATH_SYSFS
+
+# Test 5: three search paths, firmware in third
+rm -f "$FWDIR1/$FW_NAME" "$FWDIR2/$FW_NAME"
+echo -n "$FW_CONTENT3" >"$FWDIR3/$FW_NAME"
+echo -n "$FWDIR1:$FWDIR2:$FWDIR3" >$SEARCH_SYSFS
+
+if ! echo -n "$FW_NAME" >$DIR/trigger_request; then
+	echo "$0: FAIL - could not trigger request for test 5" >&2
+	exit 1
+fi
+if ! diff -q "$FWDIR3/$FW_NAME" /dev/test_firmware >/dev/null; then
+	echo "$0: FAIL - firmware content mismatch in test 5" >&2
+	exit 1
+fi
+echo "$0: search path - third directory: OK"
+
+# Test 6: empty search= should not break anything
+rm -f "$FWDIR3/$FW_NAME"
+printf '\000' >$SEARCH_SYSFS
+
+if echo -n "nonexistent-$FW_NAME" >$DIR/trigger_request 2>/dev/null; then
+	echo "$0: FAIL - empty search= should not find firmware" >&2
+	exit 1
+fi
+echo "$0: search path - empty search=: OK"
+
+# Test 7: verify sysfs readback matches what was written
+echo -n "$FWDIR1:$FWDIR2:$FWDIR3" >$SEARCH_SYSFS
+READBACK="$(cat $SEARCH_SYSFS)"
+EXPECTED="$FWDIR1:$FWDIR2:$FWDIR3"
+if [ "$READBACK" != "$EXPECTED" ]; then
+	echo "$0: FAIL - sysfs readback mismatch: '$READBACK' != '$EXPECTED'" >&2
+	exit 1
+fi
+echo "$0: search path - sysfs readback: OK"
+
+# Test 8: escaped colon in directory name (\: -> literal ':')
+FWDIR_COLON=$(mktemp -d)/fw:dir
+mkdir -p "$FWDIR_COLON"
+echo -n "$FW_CONTENT1" >"$FWDIR_COLON/$FW_NAME"
+# Write the path with the colon escaped as \:
+ESCAPED_COLON="${FWDIR_COLON//:/\\:}"
+echo -n "$ESCAPED_COLON" >$SEARCH_SYSFS
+
+if ! echo -n "$FW_NAME" >$DIR/trigger_request; then
+	echo "$0: FAIL - could not trigger request for test 8" >&2
+	rm -rf "$(dirname "$FWDIR_COLON")"
+	exit 1
+fi
+if ! diff -q "$FWDIR_COLON/$FW_NAME" /dev/test_firmware >/dev/null; then
+	echo "$0: FAIL - firmware content mismatch in test 8" >&2
+	rm -rf "$(dirname "$FWDIR_COLON")"
+	exit 1
+fi
+rm -rf "$(dirname "$FWDIR_COLON")"
+echo "$0: search path - escaped colon in directory: OK"
+
+# Test 9: escaped backslash in directory name (\\ -> literal '\')
+FWDIR_BS=$(mktemp -d)/fw\\dir
+mkdir -p "$FWDIR_BS"
+echo -n "$FW_CONTENT2" >"$FWDIR_BS/$FW_NAME"
+# Write the path with backslashes escaped as \\
+ESCAPED_BS="${FWDIR_BS//\\/\\\\}"
+echo -n "$ESCAPED_BS" >$SEARCH_SYSFS
+
+if ! echo -n "$FW_NAME" >$DIR/trigger_request; then
+	echo "$0: FAIL - could not trigger request for test 9" >&2
+	rm -rf "$(dirname "$FWDIR_BS")"
+	exit 1
+fi
+if ! diff -q "$FWDIR_BS/$FW_NAME" /dev/test_firmware >/dev/null; then
+	echo "$0: FAIL - firmware content mismatch in test 9" >&2
+	rm -rf "$(dirname "$FWDIR_BS")"
+	exit 1
+fi
+rm -rf "$(dirname "$FWDIR_BS")"
+echo "$0: search path - escaped backslash in directory: OK"
+
+# Test 10: escaped colon with multiple search paths
+FWDIR_COLON2=$(mktemp -d)/has:colon
+mkdir -p "$FWDIR_COLON2"
+echo -n "$FW_CONTENT3" >"$FWDIR_COLON2/$FW_NAME"
+ESCAPED_COLON2="${FWDIR_COLON2//:/\\:}"
+# First path is normal (no firmware), second has escaped colon (has firmware)
+echo -n "$FWDIR1:$ESCAPED_COLON2" >$SEARCH_SYSFS
+
+if ! echo -n "$FW_NAME" >$DIR/trigger_request; then
+	echo "$0: FAIL - could not trigger request for test 10" >&2
+	rm -rf "$(dirname "$FWDIR_COLON2")"
+	exit 1
+fi
+if ! diff -q "$FWDIR_COLON2/$FW_NAME" /dev/test_firmware >/dev/null; then
+	echo "$0: FAIL - firmware content mismatch in test 10" >&2
+	rm -rf "$(dirname "$FWDIR_COLON2")"
+	exit 1
+fi
+rm -rf "$(dirname "$FWDIR_COLON2")"
+echo "$0: search path - escaped colon with multiple paths: OK"
+
+echo "$0: all search path tests passed"
+exit 0

-- 
2.53.0