Add voltage regulator nodes describing the VIM4 power tree,
required by peripheral nodes such as the SD card controller.

Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
---
 .../dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts  | 90 ++++++++++++++++++++++
 1 file changed, 90 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
index fffdab96b12eb..2450084d37642 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7-a311d2-khadas-vim4.dts
@@ -6,6 +6,8 @@
 /dts-v1/;
 
 #include "amlogic-t7.dtsi"
+#include <dt-bindings/gpio/amlogic,t7-periphs-pinctrl.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Khadas vim4";
@@ -45,6 +47,94 @@ xtal: xtal-clk {
 		#clock-cells = <0>;
 	};
 
+	dc_in: regulator-dc-in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	sd_3v3: regulator-sdcard-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "SD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOD_11 GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+		enable-active-low;
+		regulator-always-on;
+	};
+
+	vcc5v: regulator-vcc-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+
+		gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc5v0_usb: regulator-vcc-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V0_USB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v>;
+
+		gpio = <&gpio GPIOY_5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vddao_1v8: regulator-vddao-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	vddio_1v8: regulator-vddio-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddio_3v3>;
+		regulator-always-on;
+	};
+
+	vddio_3v3: regulator-vddio-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddio_c: regulator-gpio-c {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_C";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddio_3v3>;
+		gpios = <&gpio GPIOD_9 GPIO_ACTIVE_HIGH>;
+		states = <1800000 1
+			  3300000 0>;
+	};
 };
 
 &uart_a {

-- 
2.49.0