From: Teguh Sobirin <teguh@sobir.in>
The AYN Odin 2 Portal is a high-performance Android-based handheld gaming
console powered by the Qualcomm Snapdragon 8 Gen 2 processor featuring a
7-inch OLED touchscreen.
Signed-off-by: Teguh Sobirin <teguh@sobir.in>
Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/qcs8550-ayntec-odin2portal.dts | 84 ++++++++++++++++++++++
2 files changed, 85 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index b42b7ef0a670b76234c063fa1aaf14a4691dba61..10e0506a52bdbfefbed2f06899cbe2f5a1894f63 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -164,6 +164,7 @@ qcs8300-ride-el2-dtbs := qcs8300-ride.dtb monaco-el2.dtbo
dtb-$(CONFIG_ARCH_QCOM) += qcs8300-ride-el2.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs8550-ayntec-odin2mini.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcs8550-ayntec-odin2portal.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride-r3.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-ayntec-odin2portal.dts b/arch/arm64/boot/dts/qcom/qcs8550-ayntec-odin2portal.dts
new file mode 100644
index 0000000000000000000000000000000000000000..bd6ba0ab941d3325f76f53e7ed65478c67b9d028
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8550-ayntec-odin2portal.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Teguh Sobirin.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "qcs8550-ayntec-common.dtsi"
+
+&{/} {
+ model = "AYN Odin 2 Portal";
+ compatible = "ayntec,odin2portal", "qcom,qcs8550", "qcom,sm8550";
+
+ vdd_bl_5v0: vdd-bl-5v0-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_bl_5v0";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vdd_disp_2v8: vdd-disp-2v8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_disp_2v8";
+
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ gpio = <&tlmm 142 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@38 {
+ compatible = "focaltech,ft5426";
+ reg = <0x38>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+
+ reset-gpios = <&tlmm 24 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l14b_3p2>;
+ iovcc-supply = <&vreg_l12b_1p8>;
+
+ pinctrl-0 = <&ts_p_rst_default &ts_p_int_default>;
+ pinctrl-1 = <&ts_p_rst_sleep &ts_p_int_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ touchscreen-size-x = <1080>;
+ touchscreen-size-y = <1920>;
+ touchscreen-swapped-x-y;
+ touchscreen-inverted-y;
+ };
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sm8550/ayntec/odin2portal/adsp.mbn",
+ "qcom/sm8550/ayntec/odin2portal/adsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&spk_amp_l {
+ firmware-name = "qcom/sm8550/ayntec/odin2portal/aw883xx_acf.bin";
+};
+
+&spk_amp_r {
+ firmware-name = "qcom/sm8550/ayntec/odin2portal/aw883xx_acf.bin";
+};
+
--
2.53.0