hp_wmi_get_fan_count_userdefine_trigger() can fail, but its return
value was silently discarded in the PWM_MODE_MAX and PWM_MODE_AUTO
cases of hp_wmi_apply_fan_settings(). The same function's return value
is already checked in hp_wmi_fan_speed_set(). Propagate errors
consistently.

hp_wmi_apply_fan_settings() itself returned an error code in all
paths, but its callers hp_wmi_hwmon_keep_alive_handler() and
hp_wmi_hwmon_init() both discarded the return value. Log failures via
pr_warn_ratelimited() in the keep-alive handler (rate-limited because
it fires every 90 seconds) and dev_warn() in init (non-fatal: the
hwmon device is already registered).

Also remove the unreachable "return 0" after the switch statement in
hp_wmi_apply_fan_settings(): every case branch already returns
explicitly.

Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
---
 drivers/platform/x86/hp/hp-wmi.c | 23 ++++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/platform/x86/hp/hp-wmi.c b/drivers/platform/x86/hp/hp-wmi.c
index 68ede7e5757a..0cb2a2b31998 100644
--- a/drivers/platform/x86/hp/hp-wmi.c
+++ b/drivers/platform/x86/hp/hp-wmi.c
@@ -2334,8 +2334,11 @@ static int hp_wmi_apply_fan_settings(struct hp_wmi_hwmon_priv *priv)
 
 	switch (priv->mode) {
 	case PWM_MODE_MAX:
-		if (is_victus_s_thermal_profile())
-			hp_wmi_get_fan_count_userdefine_trigger();
+		if (is_victus_s_thermal_profile()) {
+			ret = hp_wmi_get_fan_count_userdefine_trigger();
+			if (ret < 0)
+				return ret;
+		}
 		ret = hp_wmi_fan_speed_max_set(1);
 		if (ret < 0)
 			return ret;
@@ -2353,7 +2356,9 @@ static int hp_wmi_apply_fan_settings(struct hp_wmi_hwmon_priv *priv)
 		return 0;
 	case PWM_MODE_AUTO:
 		if (is_victus_s_thermal_profile()) {
-			hp_wmi_get_fan_count_userdefine_trigger();
+			ret = hp_wmi_get_fan_count_userdefine_trigger();
+			if (ret < 0)
+				return ret;
 			ret = hp_wmi_fan_speed_max_reset(priv);
 		} else {
 			ret = hp_wmi_fan_speed_max_set(0);
@@ -2366,8 +2371,6 @@ static int hp_wmi_apply_fan_settings(struct hp_wmi_hwmon_priv *priv)
 		/* shouldn't happen */
 		return -EINVAL;
 	}
-
-	return 0;
 }
 
 static umode_t hp_wmi_hwmon_is_visible(const void *data,
@@ -2509,6 +2512,7 @@ static void hp_wmi_hwmon_keep_alive_handler(struct work_struct *work)
 {
 	struct delayed_work *dwork;
 	struct hp_wmi_hwmon_priv *priv;
+	int ret;
 
 	dwork = to_delayed_work(work);
 	priv = container_of(dwork, struct hp_wmi_hwmon_priv, keep_alive_dwork);
@@ -2516,7 +2520,10 @@ static void hp_wmi_hwmon_keep_alive_handler(struct work_struct *work)
 	 * Re-apply the current hwmon context settings.
 	 * NOTE: hp_wmi_apply_fan_settings will handle the re-scheduling.
 	 */
-	hp_wmi_apply_fan_settings(priv);
+	ret = hp_wmi_apply_fan_settings(priv);
+	if (ret)
+		pr_warn_ratelimited("keep-alive failed to refresh fan settings: %d\n",
+				    ret);
 }
 
 static int hp_wmi_setup_fan_settings(struct hp_wmi_hwmon_priv *priv)
@@ -2578,7 +2585,9 @@ static int hp_wmi_hwmon_init(void)
 
 	INIT_DELAYED_WORK(&priv->keep_alive_dwork, hp_wmi_hwmon_keep_alive_handler);
 	platform_set_drvdata(hp_wmi_platform_dev, priv);
-	hp_wmi_apply_fan_settings(priv);
+	ret = hp_wmi_apply_fan_settings(priv);
+	if (ret)
+		dev_warn(dev, "Failed to apply initial fan settings: %d\n", ret);
 
 	return 0;
 }
-- 
2.53.0