Fix commit message formatting for the previous patch.

Signed-off-by: Aadarsh Mandal <aadarshmandal9354@gmail.com>
---
v4:
 - Remove extra space insertion.
 - Delete remaining commented-out code.
v3:
 - Add the extra space that count as insertion.
 - Remove unwanted addition.
v2:
 - Restore braces for standalone code blocks {}.
 - Delete reindented commented-out code and extra space.
v1:
 - Reindented commented-out code;extra space remained.

 drivers/staging/rtl8723bs/hal/sdio_halinit.c | 17 -----------------
 1 file changed, 17 deletions(-)

diff --git a/drivers/staging/rtl8723bs/hal/sdio_halinit.c b/drivers/staging/rtl8723bs/hal/sdio_halinit.c
index 063a0737933e..96a0c8e304da 100644
--- a/drivers/staging/rtl8723bs/hal/sdio_halinit.c
+++ b/drivers/staging/rtl8723bs/hal/sdio_halinit.c
@@ -481,9 +481,6 @@ static void _initSdioAggregationSetting(struct adapter *padapter)
 {
	struct hal_com_data	*pHalData = GET_HAL_DATA(padapter);

-	/*  Tx aggregation setting */
-/*	sdio_AggSettingTxUpdate(padapter); */
-
	/*  Rx aggregation setting */
	HalRxAggr8723BSdio(padapter);

@@ -635,9 +632,6 @@ u32 rtl8723bs_hal_init(struct adapter *padapter)
		return _SUCCESS;
	}

-	/*  Disable Interrupt first. */
-/*	rtw_hal_disable_interrupt(padapter); */
-
	ret = _InitPowerOn_8723BS(padapter);
	if (ret == _FAIL)
		return _FAIL;
@@ -656,8 +650,6 @@ u32 rtl8723bs_hal_init(struct adapter *padapter)

	rtl8723b_InitializeFirmwareVars(padapter);

-/*	SIC_Init(padapter); */
-
	if (pwrctrlpriv->reg_rfoff)
		pwrctrlpriv->rf_pwrstate = rf_off;

@@ -740,11 +732,6 @@ u32 rtl8723bs_hal_init(struct adapter *padapter)
	rtw_hal_set_chnl_bw(padapter, padapter->registrypriv.channel,
		CHANNEL_WIDTH_20, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HAL_PRIME_CHNL_OFFSET_DONT_CARE);

-	/*  Record original value for template. This is arough data, we can only use the data */
-	/*  for power adjust. The value can not be adjustde according to different power!!! */
-/*	pHalData->OriginalCckTxPwrIdx = pHalData->CurrentCckTxPwrIdx; */
-/*	pHalData->OriginalOfdm24GTxPwrIdx = pHalData->CurrentOfdm24GTxPwrIdx; */
-
	rtl8723b_InitAntenna_Selection(padapter);

	/*  */
@@ -786,8 +773,6 @@ u32 rtl8723bs_hal_init(struct adapter *padapter)
	/* ack for xmit mgmt frames. */
	rtw_write32(padapter, REG_FWHW_TXQ_CTRL, rtw_read32(padapter, REG_FWHW_TXQ_CTRL) | BIT(12));

-/*	pHalData->PreRpwmVal = SdioLocalCmd52Read1Byte(padapter, SDIO_REG_HRPWM1) & 0x80; */
-
	{
		pwrctrlpriv->rf_pwrstate = rf_on;

@@ -1075,8 +1060,6 @@ static void _ReadPROMContent(struct adapter *padapter)
	pEEPROM->EepromOrEfuse = (eeValue & BOOT_FROM_EEPROM) ? true : false;
	pEEPROM->bautoload_fail_flag = (eeValue & EEPROM_EN) ? false : true;

-/*	pHalData->EEType = IS_BOOT_FROM_EEPROM(Adapter) ? EEPROM_93C46 : EEPROM_BOOT_EFUSE; */
-
	_ReadEfuseInfo8723BS(padapter);
 }

--
2.43.0

On March 20, 2026 3:46:52 PM GMT+01:00, Aadarsh Mandal <aadarshmandal9354@gmail.com> wrote:
>Fix commit message formatting for the previous patch.
>
>Signed-off-by: Aadarsh Mandal <aadarshmandal9354@gmail.com>
>---
>v4:
> - Remove extra space insertion.
> - Delete remaining commented-out code.
>v3:
> - Add the extra space that count as insertion.
> - Remove unwanted addition.
>v2:
> - Restore braces for standalone code blocks {}.
> - Delete reindented commented-out code and extra space.
>v1:
> - Reindented commented-out code;extra space remained.
>
> drivers/staging/rtl8723bs/hal/sdio_halinit.c | 17 -----------------
> 1 file changed, 17 deletions(-)
>
>diff --git a/drivers/staging/rtl8723bs/hal/sdio_halinit.c b/drivers/staging/rtl8723bs/hal/sdio_halinit.c
>index 063a0737933e..96a0c8e304da 100644
>--- a/drivers/staging/rtl8723bs/hal/sdio_halinit.c
>+++ b/drivers/staging/rtl8723bs/hal/sdio_halinit.c
>@@ -481,9 +481,6 @@ static void _initSdioAggregationSetting(struct adapter *padapter)
> {
>	struct hal_com_data	*pHalData = GET_HAL_DATA(padapter);
>
>-	/*  Tx aggregation setting */
>-/*	sdio_AggSettingTxUpdate(padapter); */
>-
>	/*  Rx aggregation setting */
>	HalRxAggr8723BSdio(padapter);
>
>@@ -635,9 +632,6 @@ u32 rtl8723bs_hal_init(struct adapter *padapter)
>		return _SUCCESS;
>	}
>
>-	/*  Disable Interrupt first. */
>-/*	rtw_hal_disable_interrupt(padapter); */
>-
>	ret = _InitPowerOn_8723BS(padapter);
>	if (ret == _FAIL)
>		return _FAIL;
>@@ -656,8 +650,6 @@ u32 rtl8723bs_hal_init(struct adapter *padapter)
>
>	rtl8723b_InitializeFirmwareVars(padapter);
>
>-/*	SIC_Init(padapter); */
>-
>	if (pwrctrlpriv->reg_rfoff)
>		pwrctrlpriv->rf_pwrstate = rf_off;
>
>@@ -740,11 +732,6 @@ u32 rtl8723bs_hal_init(struct adapter *padapter)
>	rtw_hal_set_chnl_bw(padapter, padapter->registrypriv.channel,
>		CHANNEL_WIDTH_20, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HAL_PRIME_CHNL_OFFSET_DONT_CARE);
>
>-	/*  Record original value for template. This is arough data, we can only use the data */
>-	/*  for power adjust. The value can not be adjustde according to different power!!! */
>-/*	pHalData->OriginalCckTxPwrIdx = pHalData->CurrentCckTxPwrIdx; */
>-/*	pHalData->OriginalOfdm24GTxPwrIdx = pHalData->CurrentOfdm24GTxPwrIdx; */
>-
>	rtl8723b_InitAntenna_Selection(padapter);
>
>	/*  */
>@@ -786,8 +773,6 @@ u32 rtl8723bs_hal_init(struct adapter *padapter)
>	/* ack for xmit mgmt frames. */
>	rtw_write32(padapter, REG_FWHW_TXQ_CTRL, rtw_read32(padapter, REG_FWHW_TXQ_CTRL) | BIT(12));
>
>-/*	pHalData->PreRpwmVal = SdioLocalCmd52Read1Byte(padapter, SDIO_REG_HRPWM1) & 0x80; */
>-
>	{
>		pwrctrlpriv->rf_pwrstate = rf_on;
>
>@@ -1075,8 +1060,6 @@ static void _ReadPROMContent(struct adapter *padapter)
>	pEEPROM->EepromOrEfuse = (eeValue & BOOT_FROM_EEPROM) ? true : false;
>	pEEPROM->bautoload_fail_flag = (eeValue & EEPROM_EN) ? false : true;
>
>-/*	pHalData->EEType = IS_BOOT_FROM_EEPROM(Adapter) ? EEPROM_93C46 : EEPROM_BOOT_EFUSE; */
>-
>	_ReadEfuseInfo8723BS(padapter);
> }
>
>--
>2.43.0

Your commit message can't be: "Fix commit message formatting 
for the previous patch." Instead, it should be something like 
"Removed code that is not used anywhere in the driver."
Sincerely,
Luka Gejak