From: Abel Vesa <abel.vesa@linaro.org>
The MDSS (Mobile Display SubSystem) on Glymur provides four DisplayPort
controllers. Describe them together with the display controller and eDP
PHY. Also add the combo PHY link and vco_div clocks to the display clock
controller, and connect the PHYs and DP endpoints in the graph.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/glymur.dtsi | 466 ++++++++++++++++++++++++++++++++++-
1 file changed, 458 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
index 641707ba1e78..7679e32008bf 100644
--- a/arch/arm64/boot/dts/qcom/glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
@@ -2367,6 +2367,28 @@ usb_mp_qmpphy1: phy@fa5000 {
status = "disabled";
};
+ mdss_dp3_phy: phy@faac00 {
+ compatible = "qcom,glymur-dp-phy";
+ reg = <0x0 0x00faac00 0x0 0x1d0>,
+ <0x0 0x00faa400 0x0 0x128>,
+ <0x0 0x00faa800 0x0 0x128>,
+ <0x0 0x00faa000 0x0 0x358>;
+
+ clocks = <&dispcc DISP_CC_MDSS_DPTX3_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&tcsr TCSR_EDP_CLKREF_EN>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref";
+
+ power-domains = <&rpmhpd RPMHPD_MX>;
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
usb_0_hsphy: phy@fd3000 {
compatible = "qcom,glymur-m31-eusb2-phy",
"qcom,sm8750-m31-eusb2-phy";
@@ -2434,6 +2456,7 @@ port@2 {
reg = <2>;
usb_dp_qmpphy_dp_in: endpoint {
+ remote-endpoint = <&mdss_dp0_out>;
};
};
};
@@ -2507,6 +2530,7 @@ port@2 {
reg = <2>;
usb_1_qmpphy_dp_in: endpoint {
+ remote-endpoint = <&mdss_dp1_out>;
};
};
};
@@ -3683,6 +3707,7 @@ port@2 {
reg = <2>;
usb_2_qmpphy_dp_in: endpoint {
+ remote-endpoint = <&mdss_dp2_out>;
};
};
};
@@ -4047,20 +4072,445 @@ usb_mp: usb@a400000 {
status = "disabled";
};
+ mdss: display-subsystem@ae00000 {
+ compatible = "qcom,glymur-mdss";
+ reg = <0x0 0x0ae00000 0x0 0x1000>;
+ reg-names = "mdss";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+ resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+ interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "mdp0-mem",
+ "cpu-cfg";
+
+ power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
+
+ iommus = <&apps_smmu 0x1de0 0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ mdss_mdp: display-controller@ae01000 {
+ compatible = "qcom,glymur-dpu";
+ reg = <0x0 0x0ae01000 0x0 0x93000>,
+ <0x0 0x0aeb0000 0x0 0x3000>;
+ reg-names = "mdp",
+ "vbif";
+
+ interrupts-extended = <&mdss 0>;
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ operating-points-v2 = <&mdp_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&mdss_dp0_in>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+
+ mdss_intf4_out: endpoint {
+ remote-endpoint = <&mdss_dp1_in>;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+
+ mdss_intf5_out: endpoint {
+ remote-endpoint = <&mdss_dp3_in>;
+ };
+ };
+
+ port@6 {
+ reg = <6>;
+
+ mdss_intf6_out: endpoint {
+ remote-endpoint = <&mdss_dp2_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-156000000 {
+ opp-hz = /bits/ 64 <156000000>;
+ required-opps = <&rpmhpd_opp_low_svs_d1>;
+ };
+
+ opp-205000000 {
+ opp-hz = /bits/ 64 <205000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-337000000 {
+ opp-hz = /bits/ 64 <337000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-417000000 {
+ opp-hz = /bits/ 64 <417000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-532000000 {
+ opp-hz = /bits/ 64 <532000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ required-opps = <&rpmhpd_opp_nom_l1>;
+ };
+
+ opp-660000000 {
+ opp-hz = /bits/ 64 <660000000>;
+ required-opps = <&rpmhpd_opp_turbo>;
+ };
+
+ opp-717000000 {
+ opp-hz = /bits/ 64 <717000000>;
+ required-opps = <&rpmhpd_opp_turbo_l1>;
+ };
+ };
+ };
+
+ mdss_dp0: displayport-controller@af54000 {
+ compatible = "qcom,glymur-dp";
+ reg = <0x0 0xaf54000 0x0 0x200>,
+ <0x0 0xaf54200 0x0 0x200>,
+ <0x0 0xaf55000 0x0 0xc00>,
+ <0x0 0xaf56000 0x0 0x400>,
+ <0x0 0xaf57000 0x0 0x400>,
+ <0x0 0xaf58000 0x0 0x400>,
+ <0x0 0xaf59000 0x0 0x400>,
+ <0x0 0xaf5a000 0x0 0x600>,
+ <0x0 0xaf5b000 0x0 0x600>;
+
+ interrupts-extended = <&mdss 12>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel",
+ "stream_1_pixel";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
+ assigned-clock-parents = <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+ <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+ operating-points-v2 = <&mdss_dp0_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&usb_0_qmpphy QMP_USB43DP_DP_PHY>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dp0_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dp0_out: endpoint {
+ remote-endpoint = <&usb_dp_qmpphy_dp_in>;
+ };
+ };
+ };
+
+ mdss_dp0_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-675000000 {
+ opp-hz = /bits/ 64 <675000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss_dp1: displayport-controller@af5c000 {
+ compatible = "qcom,glymur-dp";
+ reg = <0x0 0xaf5c000 0x0 0x200>,
+ <0x0 0xaf5c200 0x0 0x200>,
+ <0x0 0xaf5d000 0x0 0xc00>,
+ <0x0 0xaf5e000 0x0 0x400>,
+ <0x0 0xaf5f000 0x0 0x400>,
+ <0x0 0xaf60000 0x0 0x400>,
+ <0x0 0xaf61000 0x0 0x400>,
+ <0x0 0xaf62000 0x0 0x600>,
+ <0x0 0xaf63000 0x0 0x600>;
+
+ interrupts-extended = <&mdss 13>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX1_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX1_PIXEL1_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel",
+ "stream_1_pixel";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>;
+ assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+ <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+ operating-points-v2 = <&mdss_dp0_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dp1_in: endpoint {
+ remote-endpoint = <&mdss_intf4_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dp1_out: endpoint {
+ remote-endpoint = <&usb_1_qmpphy_dp_in>;
+ };
+ };
+ };
+ };
+
+ mdss_dp2: displayport-controller@af64000 {
+ compatible = "qcom,glymur-dp";
+ reg = <0x0 0x0af64000 0x0 0x200>,
+ <0x0 0x0af64200 0x0 0x200>,
+ <0x0 0x0af65000 0x0 0xc00>,
+ <0x0 0x0af66000 0x0 0x400>,
+ <0x0 0x0af67000 0x0 0x400>,
+ <0x0 0x0af68000 0x0 0x400>,
+ <0x0 0x0af69000 0x0 0x400>,
+ <0x0 0x0af6a000 0x0 0x600>,
+ <0x0 0x0af6b000 0x0 0x600>;
+
+ interrupts-extended = <&mdss 14>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX2_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX2_PIXEL1_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel",
+ "stream_1_pixel";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DPTX2_PIXEL1_CLK_SRC>;
+ assigned-clock-parents = <&usb_2_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+ <&usb_2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+ operating-points-v2 = <&mdss_dp0_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&usb_2_qmpphy QMP_USB43DP_DP_PHY>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dp2_in: endpoint {
+ remote-endpoint = <&mdss_intf6_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dp2_out: endpoint {
+ remote-endpoint = <&usb_2_qmpphy_dp_in>;
+ };
+ };
+ };
+ };
+
+ mdss_dp3: displayport-controller@af6c000 {
+ compatible = "qcom,glymur-dp";
+ reg = <0x0 0x0af6c000 0x0 0x200>,
+ <0x0 0x0af6c200 0x0 0x200>,
+ <0x0 0x0af6d000 0x0 0xc00>,
+ <0x0 0x0af6e000 0x0 0x400>,
+ <0x0 0x0af6f000 0x0 0x400>,
+ <0x0 0x0af70000 0x0 0x400>,
+ <0x0 0x0af71000 0x0 0x400>,
+ <0x0 0x0af72000 0x0 0x600>,
+ <0x0 0x0af73000 0x0 0x600>;
+
+ interrupts-extended = <&mdss 15>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX3_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX3_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX3_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DPTX3_PIXEL0_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX3_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DPTX3_PIXEL0_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dp3_phy 0>,
+ <&mdss_dp3_phy 1>;
+
+ operating-points-v2 = <&mdss_dp0_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+ phys = <&mdss_dp3_phy>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dp3_in: endpoint {
+ remote-endpoint = <&mdss_intf5_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dp3_out: endpoint {
+ };
+ };
+ };
+ };
+ };
dispcc: clock-controller@af00000 {
compatible = "qcom,glymur-dispcc";
reg = <0x0 0x0af00000 0x0 0x20000>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&sleep_clk>,
- <0>, /* dp0 */
- <0>,
- <0>, /* dp1 */
- <0>,
- <0>, /* dp2 */
- <0>,
- <0>, /* dp3 */
- <0>,
+ <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp0 */
+ <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+ <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp1 */
+ <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+ <&usb_2_qmpphy QMP_USB43DP_DP_LINK_CLK>, /* dp2 */
+ <&usb_2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
+ <&mdss_dp3_phy 0>, /* dp3 */
+ <&mdss_dp3_phy 1>,
<0>, /* dsi0 */
<0>,
<0>, /* dsi1 */
--
2.48.1© 2016 - 2026 Red Hat, Inc.