dw-hdmi can operate in two different modes, depending on the platform data
as set by the driver:
A. hdmi->plat_data->output_port = 0:
the HDMI output (port@1) in device tree is not used
B. hdmi->plat_data->output_port = 1:
the HDMI output (port@1) is parsed to find the next bridge
Only case B is supported when the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag is
passed to the attach callback. Emit a warning when this is violated. Also
return -EINVAL which would be returned by drm_bridge_attach() right after
anyway.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
---
Note: Returning when teh warning triggers does not change the functional
behaviour of this function. It is not strictly necessary in this patch but
it will have to be done anyway in the following patch.
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index ee88c0e793b0..a668d66aeece 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2910,6 +2910,10 @@ static int dw_hdmi_bridge_attach(struct drm_bridge *bridge,
{
struct dw_hdmi *hdmi = bridge->driver_private;
+ /* DRM_BRIDGE_ATTACH_NO_CONNECTOR requires a remote-endpoint to the next bridge */
+ if (WARN_ON((flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) && !hdmi->plat_data->output_port))
+ return -EINVAL;
+
if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)
return drm_bridge_attach(encoder, hdmi->bridge.next_bridge,
bridge, flags);
--
2.53.0