Add bindings for Wacom W9002 and two Wacom W9007 variants which can be
found in tablets.

Co-developed-by: Ferass El Hafidi <funderscore@postmarketos.org>
Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
Signed-off-by: Hendrik Noack <hendrik-noack@gmx.de>
---
 .../input/touchscreen/wacom,w9007a-lt03.yaml  | 73 +++++++++++++++++++
 1 file changed, 73 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/wacom,w9007a-lt03.yaml

diff --git a/Documentation/devicetree/bindings/input/touchscreen/wacom,w9007a-lt03.yaml b/Documentation/devicetree/bindings/input/touchscreen/wacom,w9007a-lt03.yaml
new file mode 100644
index 000000000000..6d1da6a435d3
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/wacom,w9007a-lt03.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/wacom,w9007a-lt03.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Wacom W9000-series penabled I2C touchscreen
+
+maintainers:
+  - Hendrik Noack <hendrik-noack@gmx.de>
+
+description: |
+  The W9000-series are penabled touchscreen controllers by Wacom.
+
+  The firmware of controllers in different devices may differ. This can also
+  affect the controller's behavior.
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - wacom,w9002
+      - wacom,w9007a-lt03
+      - wacom,w9007a-v1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vdd-supply: true
+
+  flash-mode-gpios:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        digitizer@56 {
+            compatible = "wacom,w9007a-lt03";
+            reg = <0x56>;
+            interrupt-parent = <&gpd1>;
+            interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+
+            vdd-supply = <&stylus_reg>;
+
+            flash-mode-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
+
+            touchscreen-x-mm = <216>;
+            touchscreen-y-mm = <135>;
+            touchscreen-inverted-x;
+        };
+    };
-- 
2.43.0

On Thu, Mar 19, 2026 at 10:53:02AM +0100, Hendrik Noack wrote:
> Add bindings for Wacom W9002 and two Wacom W9007 variants which can be
> found in tablets.
> 
> Co-developed-by: Ferass El Hafidi <funderscore@postmarketos.org>
> Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
> Signed-off-by: Hendrik Noack <hendrik-noack@gmx.de>
> ---
>  .../input/touchscreen/wacom,w9007a-lt03.yaml  | 73 +++++++++++++++++++
>  1 file changed, 73 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/touchscreen/wacom,w9007a-lt03.yaml
> 
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/wacom,w9007a-lt03.yaml b/Documentation/devicetree/bindings/input/touchscreen/wacom,w9007a-lt03.yaml
> new file mode 100644
> index 000000000000..6d1da6a435d3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/wacom,w9007a-lt03.yaml
> @@ -0,0 +1,73 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/touchscreen/wacom,w9007a-lt03.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Wacom W9000-series penabled I2C touchscreen
> +
> +maintainers:
> +  - Hendrik Noack <hendrik-noack@gmx.de>
> +
> +description: |
> +  The W9000-series are penabled touchscreen controllers by Wacom.
> +
> +  The firmware of controllers in different devices may differ. This can also
> +  affect the controller's behavior.
> +
> +allOf:
> +  - $ref: touchscreen.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - wacom,w9002
> +      - wacom,w9007a-lt03
> +      - wacom,w9007a-v1

Please provide information in your commit message as to why these
devices are not compatible with one another.
With that,
Acked-by: Conor Dooley <conor.dooley@microchip.com>
pw-bot: changes-requested

Cheers,
Conor.


> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  vdd-supply: true
> +
> +  flash-mode-gpios:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        digitizer@56 {
> +            compatible = "wacom,w9007a-lt03";
> +            reg = <0x56>;
> +            interrupt-parent = <&gpd1>;
> +            interrupts = <1 IRQ_TYPE_EDGE_RISING>;
> +
> +            vdd-supply = <&stylus_reg>;
> +
> +            flash-mode-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>;
> +            reset-gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
> +
> +            touchscreen-x-mm = <216>;
> +            touchscreen-y-mm = <135>;
> +            touchscreen-inverted-x;
> +        };
> +    };
> -- 
> 2.43.0
>