From: Hermes Wu <Hermes.wu@ite.com.tw>
Add device tree binding documentation for the ITE IT6162 MIPI DSI to
HDMI 2.0 bridge chip. The IT6162 is an I2C-controlled bridge that
supports the following configurations:
- Single MIPI DSI input: up to 4K @ 30Hz
- Dual MIPI DSI input (combined): up to 4K @ 60Hz
The chip also supports up to 8-channel audio output via 4 I2S data
channels.
Signed-off-by: Hermes Wu <Hermes.wu@ite.com.tw>
---
Changes in v4:
- Drop ite,support-hdcp
- Drop endpoint properties already in video-interfaces.yaml
- Fix data-lanes in example with <0 1 2 3>
- Add blanking line in example before endpoint subnode starts
- Add reset-gpio and power controls to required
Changes in v3:
- Fix lane-polarities: remove $ref redefinition, allow via video-interfaces.yaml
- Improve ite,support-hdcp description to clarify FW-based HDCP behavior
- Remove descriptions repeating schema constraints
- Remove stray comment in ports required section
- Fix data-lanes spacing in example: <1 2 3 4>
- Add missing newline at end of file
- Add missing change log that Reviewed-by tag was drop in V2.
Changes in V2:
- Drop Reviewed-by tag due to DT bindings changed.
- Add property "ite,spport-hdcp" to enable HDCP
- Add property "lane-polarities" and "clock-noncontinuous" for DSI
setting
---
.../bindings/display/bridge/ite,it6162.yaml | 169 +++++++++++++++++++++
1 file changed, 169 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6162.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6162.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..d1d8a92825d253ecfa67cb1e793d372e4011b4d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it6162.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/ite,it6162.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ITE IT6162 MIPI DSI to HDMI 2.0 Bridge
+
+maintainers:
+ - Hermes Wu <Hermes.Wu@ite.com.tw>
+
+description: |
+ The ITE IT6162 is a high-performance, low-power HDMI bridge that converts
+ 2 MIPI DSI signals to 1 HDMI 2.0 output. It supports dual MIPI D-PHY 2.0
+ links up to 10 Gbps each (20 Gbps total), compatible with DSI-2 v2.0.
+
+ The HDMI transmitter supports resolutions up to 4Kx2K@60Hz and is compliant
+ with HDMI 2.0 specifications.
+
+ For audio, it supports up to 8-channel LPCM via I2S (multi-line or TDM mode),
+ with optional S/PDIF or DSD (for SACD). Audio sampling rates up to 192 kHz
+ are supported.
+
+allOf:
+ - $ref: /schemas/sound/dai-common.yaml#
+
+properties:
+ compatible:
+ const: ite,it6162
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+
+ ivdd-supply:
+ description: Core voltage supply
+
+ ovdd-supply:
+ description: I/O voltage supply
+
+ ovdd1833-supply:
+ description: Flexible I/O voltage supply (1.8V domain)
+
+ "#sound-dai-cells":
+ const: 0
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: Input port for MIPI DSI-0
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+ required:
+ - data-lanes
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description: Input port for MIPI DSI-1
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+ required:
+ - data-lanes
+
+ port@2:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: Audio input port
+
+ port@3:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: HDMI output port
+
+ required:
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - reset-gpios
+ - ivdd-supply
+ - ovdd-supply
+ - ovdd1833-supply
+ - ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@58 {
+ compatible = "ite,it6162";
+ reg = <0x58>;
+
+ #sound-dai-cells = <0>;
+
+ interrupt-parent = <&pio>;
+ interrupts = <128 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&it6162_pins>;
+
+ reset-gpios = <&pio 127 GPIO_ACTIVE_LOW>;
+
+ ivdd-supply = <&pp1000_hdmi_x>;
+ ovdd-supply = <&pp3300_vio28_x>;
+ ovdd1833-supply = <&pp1800_vcamio_x>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ it6162_dsi0: endpoint {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&dsi_0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ it6162_dsi1: endpoint {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&dsi_1_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ it6162_audio_in: endpoint {
+ remote-endpoint = <&i2s0_out>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ it6162_hdmi_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+ };
--
2.34.1On Thu, Mar 19, 2026 at 02:37:11PM +0800, Hermes Wu wrote: > Add device tree binding documentation for the ITE IT6162 MIPI DSI to > HDMI 2.0 bridge chip. The IT6162 is an I2C-controlled bridge that > supports the following configurations: > > - Single MIPI DSI input: up to 4K @ 30Hz > - Dual MIPI DSI input (combined): up to 4K @ 60Hz > > The chip also supports up to 8-channel audio output via 4 I2S data > channels. > > Signed-off-by: Hermes Wu <Hermes.wu@ite.com.tw> > --- > Changes in v4: > - Drop ite,support-hdcp > - Drop endpoint properties already in video-interfaces.yaml > - Fix data-lanes in example with <0 1 2 3> > - Add blanking line in example before endpoint subnode starts > - Add reset-gpio and power controls to required Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Best regards, Krzysztof
Hi >On Thu, Mar 19, 2026 at 02:37:11PM +0800, Hermes Wu wrote: >> Add device tree binding documentation for the ITE IT6162 MIPI DSI to >> HDMI 2.0 bridge chip. The IT6162 is an I2C-controlled bridge that >> supports the following configurations: >> >> - Single MIPI DSI input: up to 4K @ 30Hz >> - Dual MIPI DSI input (combined): up to 4K @ 60Hz >> >> The chip also supports up to 8-channel audio output via 4 I2S data >> channels. >> >> Signed-off-by: Hermes Wu <Hermes.wu@ite.com.tw> >> --- >> Changes in v4: >> - Drop ite,support-hdcp >> - Drop endpoint properties already in video-interfaces.yaml >> - Fix data-lanes in example with <0 1 2 3> >> - Add blanking line in example before endpoint subnode starts >> - Add reset-gpio and power controls to required > >Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> > Thank you for reviewing >Best regards, >Krzysztof > > BR, Hermes
© 2016 - 2026 Red Hat, Inc.