The Ayaneo Pocket S2 is a gaming console based on the Qualcomm
Snapdragon 8 Gen 3. It has an internal UFS storage, WiFi,
Bluetooth, gaming buttons, SDCard, 2K display and USB-C
connector.
Product Page [1].
The Initial linux port was done by KancyJoe (Sunflower2333)
at [2].
The UPD720201 binding patch has been sent separately in [3]
and is ready to be merged. The pci/pwrctrl changes were merged
in the pci tree.
[1] https://www.ayaneo.com/goods/9344082149621
[2] https://github.com/sunflower2333/linux/tree/master
[3] https://lore.kernel.org/all/20260319-topic-sm8650-ayaneo-pocket-s2-upd-bindings-v1-1-84e4ef564022@linaro.org/
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
Changes in v6:
- Added the review tags
- Dropped all the pci/pwrctrl applied patches
- Sent the UPD720201 bindings in a separate patch
- Link to v5: https://patch.msgid.link/20260220-topic-sm8650-ayaneo-pocket-s2-base-v5-0-1ad79caa1efa@linaro.org
Changes in v5:
- Rebased on -next
- Collected tags
- Rebased/renamed slot to generic based on changes from Bjorn
- Link to v4: https://patch.msgid.link/20260216-topic-sm8650-ayaneo-pocket-s2-base-v4-0-802c82795431@linaro.org
Changes in v4:
- Renamed slot to generic, in the code as well, fixed Kconfig & commit message
- Switched the UPD72020x bindings additionalProperties to true to allow devices subnodes
- Collected acks
- Link to v3: https://patch.msgid.link/20260206-topic-sm8650-ayaneo-pocket-s2-base-v3-0-5b79c5d61a03@linaro.org
Changes in v3:
- Made renesas,upd720201-pci bindings supplies required
- Fixed description and example of renesas,upd720201-pci bindings
- Renamed slot to generic, added renesas,upd720201-pci entry
- Used PMIC_GPIO_STRENGTH_LOW instead of numbers
- Removed all output-low in pinconf
- Link to v2: https://patch.msgid.link/20260127-topic-sm8650-ayaneo-pocket-s2-base-v2-0-c55ec1b5d8bf@linaro.org
Changes in v2:
- Add proper regulators for the USB controller, with bindings & power ctrl
- Add proper regulators for FAN
- Dropped support for headset over USB-C, audio is connected to a jack port
- Cleaned up Audio routing and fixed the DP endpoint index
- Added i2c clk frequencies
- Renamed fan node and used interrupts-extended
- Dropped the usb-c self-powered
- Reordered nodes alphabetically
- Renamed pcieport1 to pcie1_port0
- Link to v1: https://patch.msgid.link/20260121-topic-sm8650-ayaneo-pocket-s2-base-v1-0-bb3f95f1c085@linaro.org
---
KancyJoe (1):
arm64: dts: qcom: add basic devicetree for Ayaneo Pocket S2 gaming console
Neil Armstrong (4):
arm64: defconfig: enable pci-pwrctrl-generic as module
dt-binding: vendor-prefixes: document the Ayaneo brand
dt-bindings: arm: qcom: document the Ayaneo Pocket S2
arm64: dts: qcom: sm8650: Add sound DAI prefix for DP
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/sm8650-ayaneo-pocket-s2.dts | 1551 ++++++++++++++++++++
arch/arm64/boot/dts/qcom/sm8650.dtsi | 47 +-
arch/arm64/configs/defconfig | 1 +
6 files changed, 1580 insertions(+), 23 deletions(-)
---
base-commit: 8e42d2514a7e8eb8d740d0ba82339dd6c0b6463f
change-id: 20260121-topic-sm8650-ayaneo-pocket-s2-base-05c348efd86d
Best regards,
--
Neil Armstrong <neil.armstrong@linaro.org>