Configure and enable the nodes for UFS, so that we can access the
internal storage.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
index 89ba09f48491..bba327cc7a38 100644
--- a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
+++ b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
@@ -838,6 +838,24 @@ &uart5 {
 	status = "okay";
 };
 
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 167 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l12b>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l5f>;
+	vccq-max-microamp = <750000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l2b>;
+	vdda-pll-supply = <&vreg_l4b>;
+
+	status = "okay";
+};
+
 &usb_1 {
 	dr_mode = "otg";
 

-- 
2.53.0