Devices using SETAASA for address assignment are not required to have
a 48-bit PID according to the I3C specification. Allow such devices to
register and use the static address where PID was required.

Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
---
 drivers/i3c/master.c | 51 ++++++++++++++++++++++++++++++++++----------
 1 file changed, 40 insertions(+), 11 deletions(-)

diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index 40a3bb734234..0cce75bb05b0 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -1835,8 +1835,17 @@ i3c_master_register_new_i3c_devs(struct i3c_master_controller *master)
 		desc->dev->dev.type = &i3c_device_type;
 		desc->dev->dev.bus = &i3c_bus_type;
 		desc->dev->dev.release = i3c_device_release;
-		dev_set_name(&desc->dev->dev, "%d-%llx", master->bus.id,
-			     desc->info.pid);
+
+		/*
+		 * For devices without PID (e.g., SETAASA devices), use
+		 * static address for naming instead.
+		 */
+		if (desc->info.pid)
+			dev_set_name(&desc->dev->dev, "%d-%llx", master->bus.id,
+				     desc->info.pid);
+		else
+			dev_set_name(&desc->dev->dev, "%d-static_addr-%02x", master->bus.id,
+				     desc->info.static_addr);
 
 		if (desc->boardinfo)
 			device_set_node(&desc->dev->dev, desc->boardinfo->fwnode);
@@ -2281,8 +2290,18 @@ static void i3c_master_attach_boardinfo(struct i3c_dev_desc *i3cdev)
 	struct i3c_dev_boardinfo *i3cboardinfo;
 
 	list_for_each_entry(i3cboardinfo, &master->boardinfo.i3c, node) {
-		if (i3cdev->info.pid != i3cboardinfo->pid)
-			continue;
+		/*
+		 * For devices without PID (e.g., SETAASA devices), match by
+		 * static address. For devices with PID, match by PID.
+		 */
+		if (i3cboardinfo->pid) {
+			if (i3cdev->info.pid != i3cboardinfo->pid)
+				continue;
+		} else {
+			if (!i3cboardinfo->static_addr ||
+			    i3cdev->info.static_addr != i3cboardinfo->static_addr)
+				continue;
+		}
 
 		i3cdev->boardinfo = i3cboardinfo;
 		i3cdev->info.static_addr = i3cboardinfo->static_addr;
@@ -2296,8 +2315,12 @@ i3c_master_search_i3c_dev_duplicate(struct i3c_dev_desc *refdev)
 	struct i3c_master_controller *master = i3c_dev_get_master(refdev);
 	struct i3c_dev_desc *i3cdev;
 
+	if (!refdev->info.pid)
+		return NULL;
+
 	i3c_bus_for_each_i3cdev(&master->bus, i3cdev) {
-		if (i3cdev != refdev && i3cdev->info.pid == refdev->info.pid)
+		if (i3cdev != refdev && i3cdev->info.pid &&
+		    i3cdev->info.pid == refdev->info.pid)
 			return i3cdev;
 	}
 
@@ -2582,9 +2605,15 @@ i3c_master_add_i3c_boardinfo(struct i3c_master_controller *master,
 
 	boardinfo->pid = ((u64)reg[1] << 32) | reg[2];
 
-	if ((boardinfo->pid & GENMASK_ULL(63, 48)) ||
-	    I3C_PID_RND_LOWER_32BITS(boardinfo->pid))
-		return -EINVAL;
+	/* For SETAASA devices, validate the static address instead of PID */
+	if (boardinfo->static_addr_method & I3C_ADDR_METHOD_SETAASA) {
+		if (!boardinfo->static_addr)
+			return -EINVAL;
+	} else {
+		if ((boardinfo->pid & GENMASK_ULL(63, 48)) ||
+		    I3C_PID_RND_LOWER_32BITS(boardinfo->pid))
+			return -EINVAL;
+	}
 
 	boardinfo->init_dyn_addr = init_dyn_addr;
 	boardinfo->fwnode = fwnode_handle_get(fwnode);
@@ -2607,10 +2636,10 @@ static int i3c_master_add_of_dev(struct i3c_master_controller *master,
 		return ret;
 
 	/*
-	 * The manufacturer ID can't be 0. If reg[1] == 0 that means we're
-	 * dealing with an I2C device.
+	 * I3C device should have either the manufacturer ID specified or the
+	 * address discovery method specified. Else treat it as an I2C device.
 	 */
-	if (!reg[1])
+	if (!reg[1] && !fwnode_property_present(fwnode, "mipi-i3c-static-method"))
 		ret = i3c_master_add_i2c_boardinfo(master, fwnode, reg);
 	else
 		ret = i3c_master_add_i3c_boardinfo(master, fwnode, reg);
-- 
2.50.1