Replace all OF-specific functions with unified device property functions
as a prerequisite to support both ACPI and device tree.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
---
drivers/i3c/master.c | 91 ++++++++++++++++++++++----------------
include/linux/i3c/master.h | 5 ++-
2 files changed, 55 insertions(+), 41 deletions(-)
diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index c32847bc4d0d..2c479fecbfdf 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -5,16 +5,19 @@
* Author: Boris Brezillon <boris.brezillon@bootlin.com>
*/
+#include <linux/acpi.h>
#include <linux/atomic.h>
#include <linux/bug.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/export.h>
+#include <linux/i2c.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/of.h>
#include <linux/pm_runtime.h>
+#include <linux/property.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
@@ -497,7 +500,7 @@ static void i3c_bus_cleanup(struct i3c_bus *i3cbus)
mutex_unlock(&i3c_core_lock);
}
-static int i3c_bus_init(struct i3c_bus *i3cbus, struct device_node *np)
+static int i3c_bus_init(struct i3c_bus *i3cbus, struct fwnode_handle *fwnode)
{
int ret, start, end, id = -1;
@@ -507,8 +510,8 @@ static int i3c_bus_init(struct i3c_bus *i3cbus, struct device_node *np)
i3c_bus_init_addrslots(i3cbus);
i3cbus->mode = I3C_BUS_MODE_PURE;
- if (np)
- id = of_alias_get_id(np, "i3c");
+ if (fwnode && is_of_node(fwnode))
+ id = of_alias_get_id(to_of_node(fwnode), "i3c");
mutex_lock(&i3c_core_lock);
if (id >= 0) {
@@ -811,7 +814,7 @@ static void i3c_masterdev_release(struct device *dev)
WARN_ON(!list_empty(&bus->devs.i2c) || !list_empty(&bus->devs.i3c));
i3c_bus_cleanup(bus);
- of_node_put(dev->of_node);
+ fwnode_handle_put(dev->fwnode);
}
static const struct device_type i3c_masterdev_type = {
@@ -995,7 +998,7 @@ static void i3c_device_release(struct device *dev)
WARN_ON(i3cdev->desc);
- of_node_put(i3cdev->dev.of_node);
+ fwnode_handle_put(dev->fwnode);
kfree(i3cdev);
}
@@ -1783,7 +1786,7 @@ i3c_master_register_new_i3c_devs(struct i3c_master_controller *master)
desc->info.pid);
if (desc->boardinfo)
- desc->dev->dev.of_node = desc->boardinfo->of_node;
+ device_set_node(&desc->dev->dev, desc->boardinfo->fwnode);
ret = device_register(&desc->dev->dev);
if (ret) {
@@ -2402,8 +2405,8 @@ EXPORT_SYMBOL_GPL(i3c_master_add_i3c_dev_locked);
#define OF_I3C_REG1_IS_I2C_DEV BIT(31)
static int
-of_i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master,
- struct device_node *node, u32 *reg)
+i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master,
+ struct fwnode_handle *fwnode, u32 *reg)
{
struct i2c_dev_boardinfo *boardinfo;
struct device *dev = &master->dev;
@@ -2413,9 +2416,13 @@ of_i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master,
if (!boardinfo)
return -ENOMEM;
- ret = of_i2c_get_board_info(dev, node, &boardinfo->base);
- if (ret)
- return ret;
+ if (is_of_node(fwnode)) {
+ ret = of_i2c_get_board_info(dev, to_of_node(fwnode), &boardinfo->base);
+ if (ret)
+ return ret;
+ } else {
+ return -EINVAL;
+ }
/*
* The I3C Specification does not clearly say I2C devices with 10-bit
@@ -2431,14 +2438,14 @@ of_i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master,
boardinfo->lvr = reg[2];
list_add_tail(&boardinfo->node, &master->boardinfo.i2c);
- of_node_get(node);
+ fwnode_handle_get(fwnode);
return 0;
}
static int
-of_i3c_master_add_i3c_boardinfo(struct i3c_master_controller *master,
- struct device_node *node, u32 *reg)
+i3c_master_add_i3c_boardinfo(struct i3c_master_controller *master,
+ struct fwnode_handle *fwnode, u32 *reg)
{
struct i3c_dev_boardinfo *boardinfo;
struct device *dev = &master->dev;
@@ -2461,7 +2468,7 @@ of_i3c_master_add_i3c_boardinfo(struct i3c_master_controller *master,
boardinfo->static_addr = reg[0];
- if (!of_property_read_u32(node, "assigned-address", &init_dyn_addr)) {
+ if (!fwnode_property_read_u32(fwnode, "assigned-address", &init_dyn_addr)) {
if (init_dyn_addr > I3C_MAX_ADDR)
return -EINVAL;
@@ -2478,14 +2485,14 @@ of_i3c_master_add_i3c_boardinfo(struct i3c_master_controller *master,
return -EINVAL;
boardinfo->init_dyn_addr = init_dyn_addr;
- boardinfo->of_node = of_node_get(node);
+ boardinfo->fwnode = fwnode_handle_get(fwnode);
list_add_tail(&boardinfo->node, &master->boardinfo.i3c);
return 0;
}
-static int of_i3c_master_add_dev(struct i3c_master_controller *master,
- struct device_node *node)
+static int i3c_master_add_dev(struct i3c_master_controller *master,
+ struct fwnode_handle *fwnode)
{
u32 reg[3];
int ret;
@@ -2493,7 +2500,7 @@ static int of_i3c_master_add_dev(struct i3c_master_controller *master,
if (!master)
return -EINVAL;
- ret = of_property_read_u32_array(node, "reg", reg, ARRAY_SIZE(reg));
+ ret = fwnode_property_read_u32_array(fwnode, "reg", reg, ARRAY_SIZE(reg));
if (ret)
return ret;
@@ -2502,25 +2509,25 @@ static int of_i3c_master_add_dev(struct i3c_master_controller *master,
* dealing with an I2C device.
*/
if (!reg[1])
- ret = of_i3c_master_add_i2c_boardinfo(master, node, reg);
+ ret = i3c_master_add_i2c_boardinfo(master, fwnode, reg);
else
- ret = of_i3c_master_add_i3c_boardinfo(master, node, reg);
+ ret = i3c_master_add_i3c_boardinfo(master, fwnode, reg);
return ret;
}
-static int of_populate_i3c_bus(struct i3c_master_controller *master)
+static int fwnode_populate_i3c_bus(struct i3c_master_controller *master)
{
struct device *dev = &master->dev;
- struct device_node *i3cbus_np = dev->of_node;
+ struct fwnode_handle *fwnode = dev_fwnode(dev);
int ret;
u32 val;
- if (!i3cbus_np)
+ if (!fwnode)
return 0;
- for_each_available_child_of_node_scoped(i3cbus_np, node) {
- ret = of_i3c_master_add_dev(master, node);
+ fwnode_for_each_available_child_node_scoped(fwnode, child) {
+ ret = i3c_master_add_dev(master, child);
if (ret)
return ret;
}
@@ -2530,10 +2537,10 @@ static int of_populate_i3c_bus(struct i3c_master_controller *master)
* on the bus are not supporting typical rates, or if the bus topology
* prevents it from using max possible rate.
*/
- if (!of_property_read_u32(i3cbus_np, "i2c-scl-hz", &val))
+ if (!device_property_read_u32(dev, "i2c-scl-hz", &val))
master->bus.scl_rate.i2c = val;
- if (!of_property_read_u32(i3cbus_np, "i3c-scl-hz", &val))
+ if (!device_property_read_u32(dev, "i3c-scl-hz", &val))
master->bus.scl_rate.i3c = val;
return 0;
@@ -2588,7 +2595,7 @@ static u8 i3c_master_i2c_get_lvr(struct i2c_client *client)
u8 lvr = I3C_LVR_I2C_INDEX(2) | I3C_LVR_I2C_FM_MODE;
u32 reg[3];
- if (!of_property_read_u32_array(client->dev.of_node, "reg", reg, ARRAY_SIZE(reg)))
+ if (!fwnode_property_read_u32_array(client->dev.fwnode, "reg", reg, ARRAY_SIZE(reg)))
lvr = reg[2];
return lvr;
@@ -2707,7 +2714,8 @@ static int i3c_master_i2c_adapter_init(struct i3c_master_controller *master)
struct i2c_adapter *adap = i3c_master_to_i2c_adapter(master);
struct i2c_dev_desc *i2cdev;
struct i2c_dev_boardinfo *i2cboardinfo;
- int ret, id;
+ struct fwnode_handle *fwnode = dev_fwnode(&master->dev);
+ int ret, id = -1;
adap->dev.parent = master->dev.parent;
adap->owner = master->dev.parent->driver->owner;
@@ -2716,7 +2724,9 @@ static int i3c_master_i2c_adapter_init(struct i3c_master_controller *master)
adap->timeout = HZ;
adap->retries = 3;
- id = of_alias_get_id(master->dev.of_node, "i2c");
+ if (fwnode && is_of_node(fwnode))
+ id = of_alias_get_id(to_of_node(fwnode), "i2c");
+
if (id >= 0) {
adap->nr = id;
ret = i2c_add_numbered_adapter(adap);
@@ -3017,7 +3027,7 @@ int i3c_master_register(struct i3c_master_controller *master,
return ret;
master->dev.parent = parent;
- master->dev.of_node = of_node_get(parent->of_node);
+ device_set_node(&master->dev, fwnode_handle_get(dev_fwnode(parent)));
master->dev.bus = &i3c_bus_type;
master->dev.type = &i3c_masterdev_type;
master->dev.release = i3c_masterdev_release;
@@ -3036,13 +3046,13 @@ int i3c_master_register(struct i3c_master_controller *master,
master->dev.coherent_dma_mask = parent->coherent_dma_mask;
master->dev.dma_parms = parent->dma_parms;
- ret = i3c_bus_init(i3cbus, master->dev.of_node);
+ ret = i3c_bus_init(i3cbus, dev_fwnode(&master->dev));
if (ret)
goto err_put_dev;
dev_set_name(&master->dev, "i3c-%d", i3cbus->id);
- ret = of_populate_i3c_bus(master);
+ ret = fwnode_populate_i3c_bus(master);
if (ret)
goto err_put_dev;
@@ -3300,11 +3310,14 @@ static int __init i3c_init(void)
{
int res;
- res = of_alias_get_highest_id("i3c");
- if (res >= 0) {
- mutex_lock(&i3c_core_lock);
- __i3c_first_dynamic_bus_num = res + 1;
- mutex_unlock(&i3c_core_lock);
+ /* of_alias_get_highest_id is DT-specific, only call for DT systems */
+ if (IS_ENABLED(CONFIG_OF)) {
+ res = of_alias_get_highest_id("i3c");
+ if (res >= 0) {
+ mutex_lock(&i3c_core_lock);
+ __i3c_first_dynamic_bus_num = res + 1;
+ mutex_unlock(&i3c_core_lock);
+ }
}
res = bus_register_notifier(&i2c_bus_type, &i2cdev_notifier);
diff --git a/include/linux/i3c/master.h b/include/linux/i3c/master.h
index 592b646f6134..6b03a3ce574c 100644
--- a/include/linux/i3c/master.h
+++ b/include/linux/i3c/master.h
@@ -177,7 +177,8 @@ struct i3c_device_ibi_info {
* @pid: I3C Provisioned ID exposed by the device. This is a unique identifier
* that may be used to attach boardinfo to i3c_dev_desc when the device
* does not have a static address
- * @of_node: optional DT node in case the device has been described in the DT
+ * @fwnode: Firmware node (DT or ACPI) in case the device has been
+ * described in firmware
*
* This structure is used to attach board-level information to an I3C device.
* Not all I3C devices connected on the bus will have a boardinfo. It's only
@@ -189,7 +190,7 @@ struct i3c_dev_boardinfo {
u8 init_dyn_addr;
u8 static_addr;
u64 pid;
- struct device_node *of_node;
+ struct fwnode_handle *fwnode;
};
/**
--
2.50.1On Wed, Mar 18, 2026 at 10:57:16PM +0530, Akhil R wrote:
> Replace all OF-specific functions with unified device property functions
> as a prerequisite to support both ACPI and device tree.
>
> Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
> ---
> drivers/i3c/master.c | 91 ++++++++++++++++++++++----------------
> include/linux/i3c/master.h | 5 ++-
> 2 files changed, 55 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
> index c32847bc4d0d..2c479fecbfdf 100644
> --- a/drivers/i3c/master.c
> +++ b/drivers/i3c/master.c
[...]
> @@ -3300,11 +3310,14 @@ static int __init i3c_init(void)
> {
> int res;
>
> - res = of_alias_get_highest_id("i3c");
> - if (res >= 0) {
> - mutex_lock(&i3c_core_lock);
> - __i3c_first_dynamic_bus_num = res + 1;
> - mutex_unlock(&i3c_core_lock);
> + /* of_alias_get_highest_id is DT-specific, only call for DT systems */
> + if (IS_ENABLED(CONFIG_OF)) {
BTW, CONFIG_OF is *always* enabled on arm64.
> + res = of_alias_get_highest_id("i3c");
This will just return an error if not booting with DT or if CONFIG_OF is
disabled.
> + if (res >= 0) {
> + mutex_lock(&i3c_core_lock);
> + __i3c_first_dynamic_bus_num = res + 1;
> + mutex_unlock(&i3c_core_lock);
> + }
> }
>
> res = bus_register_notifier(&i2c_bus_type, &i2cdev_notifier);
On Wed, Mar 18, 2026 at 10:57:16PM +0530, Akhil R wrote:
> Replace all OF-specific functions with unified device property functions
> as a prerequisite to support both ACPI and device tree.
>
> Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> ---
> drivers/i3c/master.c | 91 ++++++++++++++++++++++----------------
> include/linux/i3c/master.h | 5 ++-
> 2 files changed, 55 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
> index c32847bc4d0d..2c479fecbfdf 100644
> --- a/drivers/i3c/master.c
> +++ b/drivers/i3c/master.c
> @@ -5,16 +5,19 @@
> * Author: Boris Brezillon <boris.brezillon@bootlin.com>
> */
>
> +#include <linux/acpi.h>
> #include <linux/atomic.h>
> #include <linux/bug.h>
> #include <linux/device.h>
> #include <linux/dma-mapping.h>
> #include <linux/err.h>
> #include <linux/export.h>
> +#include <linux/i2c.h>
> #include <linux/kernel.h>
> #include <linux/list.h>
> #include <linux/of.h>
> #include <linux/pm_runtime.h>
> +#include <linux/property.h>
> #include <linux/slab.h>
> #include <linux/spinlock.h>
> #include <linux/workqueue.h>
> @@ -497,7 +500,7 @@ static void i3c_bus_cleanup(struct i3c_bus *i3cbus)
> mutex_unlock(&i3c_core_lock);
> }
>
> -static int i3c_bus_init(struct i3c_bus *i3cbus, struct device_node *np)
> +static int i3c_bus_init(struct i3c_bus *i3cbus, struct fwnode_handle *fwnode)
> {
> int ret, start, end, id = -1;
>
> @@ -507,8 +510,8 @@ static int i3c_bus_init(struct i3c_bus *i3cbus, struct device_node *np)
> i3c_bus_init_addrslots(i3cbus);
> i3cbus->mode = I3C_BUS_MODE_PURE;
>
> - if (np)
> - id = of_alias_get_id(np, "i3c");
> + if (fwnode && is_of_node(fwnode))
> + id = of_alias_get_id(to_of_node(fwnode), "i3c");
>
> mutex_lock(&i3c_core_lock);
> if (id >= 0) {
> @@ -811,7 +814,7 @@ static void i3c_masterdev_release(struct device *dev)
> WARN_ON(!list_empty(&bus->devs.i2c) || !list_empty(&bus->devs.i3c));
> i3c_bus_cleanup(bus);
>
> - of_node_put(dev->of_node);
> + fwnode_handle_put(dev->fwnode);
> }
>
> static const struct device_type i3c_masterdev_type = {
> @@ -995,7 +998,7 @@ static void i3c_device_release(struct device *dev)
>
> WARN_ON(i3cdev->desc);
>
> - of_node_put(i3cdev->dev.of_node);
> + fwnode_handle_put(dev->fwnode);
> kfree(i3cdev);
> }
>
> @@ -1783,7 +1786,7 @@ i3c_master_register_new_i3c_devs(struct i3c_master_controller *master)
> desc->info.pid);
>
> if (desc->boardinfo)
> - desc->dev->dev.of_node = desc->boardinfo->of_node;
> + device_set_node(&desc->dev->dev, desc->boardinfo->fwnode);
>
> ret = device_register(&desc->dev->dev);
> if (ret) {
> @@ -2402,8 +2405,8 @@ EXPORT_SYMBOL_GPL(i3c_master_add_i3c_dev_locked);
> #define OF_I3C_REG1_IS_I2C_DEV BIT(31)
>
> static int
> -of_i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master,
> - struct device_node *node, u32 *reg)
> +i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master,
> + struct fwnode_handle *fwnode, u32 *reg)
> {
> struct i2c_dev_boardinfo *boardinfo;
> struct device *dev = &master->dev;
> @@ -2413,9 +2416,13 @@ of_i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master,
> if (!boardinfo)
> return -ENOMEM;
>
> - ret = of_i2c_get_board_info(dev, node, &boardinfo->base);
> - if (ret)
> - return ret;
> + if (is_of_node(fwnode)) {
> + ret = of_i2c_get_board_info(dev, to_of_node(fwnode), &boardinfo->base);
> + if (ret)
> + return ret;
> + } else {
> + return -EINVAL;
> + }
>
> /*
> * The I3C Specification does not clearly say I2C devices with 10-bit
> @@ -2431,14 +2438,14 @@ of_i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master,
> boardinfo->lvr = reg[2];
>
> list_add_tail(&boardinfo->node, &master->boardinfo.i2c);
> - of_node_get(node);
> + fwnode_handle_get(fwnode);
>
> return 0;
> }
>
> static int
> -of_i3c_master_add_i3c_boardinfo(struct i3c_master_controller *master,
> - struct device_node *node, u32 *reg)
> +i3c_master_add_i3c_boardinfo(struct i3c_master_controller *master,
> + struct fwnode_handle *fwnode, u32 *reg)
> {
> struct i3c_dev_boardinfo *boardinfo;
> struct device *dev = &master->dev;
> @@ -2461,7 +2468,7 @@ of_i3c_master_add_i3c_boardinfo(struct i3c_master_controller *master,
>
> boardinfo->static_addr = reg[0];
>
> - if (!of_property_read_u32(node, "assigned-address", &init_dyn_addr)) {
> + if (!fwnode_property_read_u32(fwnode, "assigned-address", &init_dyn_addr)) {
> if (init_dyn_addr > I3C_MAX_ADDR)
> return -EINVAL;
>
> @@ -2478,14 +2485,14 @@ of_i3c_master_add_i3c_boardinfo(struct i3c_master_controller *master,
> return -EINVAL;
>
> boardinfo->init_dyn_addr = init_dyn_addr;
> - boardinfo->of_node = of_node_get(node);
> + boardinfo->fwnode = fwnode_handle_get(fwnode);
> list_add_tail(&boardinfo->node, &master->boardinfo.i3c);
>
> return 0;
> }
>
> -static int of_i3c_master_add_dev(struct i3c_master_controller *master,
> - struct device_node *node)
> +static int i3c_master_add_dev(struct i3c_master_controller *master,
> + struct fwnode_handle *fwnode)
> {
> u32 reg[3];
> int ret;
> @@ -2493,7 +2500,7 @@ static int of_i3c_master_add_dev(struct i3c_master_controller *master,
> if (!master)
> return -EINVAL;
>
> - ret = of_property_read_u32_array(node, "reg", reg, ARRAY_SIZE(reg));
> + ret = fwnode_property_read_u32_array(fwnode, "reg", reg, ARRAY_SIZE(reg));
> if (ret)
> return ret;
>
> @@ -2502,25 +2509,25 @@ static int of_i3c_master_add_dev(struct i3c_master_controller *master,
> * dealing with an I2C device.
> */
> if (!reg[1])
> - ret = of_i3c_master_add_i2c_boardinfo(master, node, reg);
> + ret = i3c_master_add_i2c_boardinfo(master, fwnode, reg);
> else
> - ret = of_i3c_master_add_i3c_boardinfo(master, node, reg);
> + ret = i3c_master_add_i3c_boardinfo(master, fwnode, reg);
>
> return ret;
> }
>
> -static int of_populate_i3c_bus(struct i3c_master_controller *master)
> +static int fwnode_populate_i3c_bus(struct i3c_master_controller *master)
> {
> struct device *dev = &master->dev;
> - struct device_node *i3cbus_np = dev->of_node;
> + struct fwnode_handle *fwnode = dev_fwnode(dev);
> int ret;
> u32 val;
>
> - if (!i3cbus_np)
> + if (!fwnode)
> return 0;
>
> - for_each_available_child_of_node_scoped(i3cbus_np, node) {
> - ret = of_i3c_master_add_dev(master, node);
> + fwnode_for_each_available_child_node_scoped(fwnode, child) {
> + ret = i3c_master_add_dev(master, child);
> if (ret)
> return ret;
> }
> @@ -2530,10 +2537,10 @@ static int of_populate_i3c_bus(struct i3c_master_controller *master)
> * on the bus are not supporting typical rates, or if the bus topology
> * prevents it from using max possible rate.
> */
> - if (!of_property_read_u32(i3cbus_np, "i2c-scl-hz", &val))
> + if (!device_property_read_u32(dev, "i2c-scl-hz", &val))
> master->bus.scl_rate.i2c = val;
>
> - if (!of_property_read_u32(i3cbus_np, "i3c-scl-hz", &val))
> + if (!device_property_read_u32(dev, "i3c-scl-hz", &val))
> master->bus.scl_rate.i3c = val;
>
> return 0;
> @@ -2588,7 +2595,7 @@ static u8 i3c_master_i2c_get_lvr(struct i2c_client *client)
> u8 lvr = I3C_LVR_I2C_INDEX(2) | I3C_LVR_I2C_FM_MODE;
> u32 reg[3];
>
> - if (!of_property_read_u32_array(client->dev.of_node, "reg", reg, ARRAY_SIZE(reg)))
> + if (!fwnode_property_read_u32_array(client->dev.fwnode, "reg", reg, ARRAY_SIZE(reg)))
> lvr = reg[2];
>
> return lvr;
> @@ -2707,7 +2714,8 @@ static int i3c_master_i2c_adapter_init(struct i3c_master_controller *master)
> struct i2c_adapter *adap = i3c_master_to_i2c_adapter(master);
> struct i2c_dev_desc *i2cdev;
> struct i2c_dev_boardinfo *i2cboardinfo;
> - int ret, id;
> + struct fwnode_handle *fwnode = dev_fwnode(&master->dev);
> + int ret, id = -1;
>
> adap->dev.parent = master->dev.parent;
> adap->owner = master->dev.parent->driver->owner;
> @@ -2716,7 +2724,9 @@ static int i3c_master_i2c_adapter_init(struct i3c_master_controller *master)
> adap->timeout = HZ;
> adap->retries = 3;
>
> - id = of_alias_get_id(master->dev.of_node, "i2c");
> + if (fwnode && is_of_node(fwnode))
> + id = of_alias_get_id(to_of_node(fwnode), "i2c");
> +
> if (id >= 0) {
> adap->nr = id;
> ret = i2c_add_numbered_adapter(adap);
> @@ -3017,7 +3027,7 @@ int i3c_master_register(struct i3c_master_controller *master,
> return ret;
>
> master->dev.parent = parent;
> - master->dev.of_node = of_node_get(parent->of_node);
> + device_set_node(&master->dev, fwnode_handle_get(dev_fwnode(parent)));
> master->dev.bus = &i3c_bus_type;
> master->dev.type = &i3c_masterdev_type;
> master->dev.release = i3c_masterdev_release;
> @@ -3036,13 +3046,13 @@ int i3c_master_register(struct i3c_master_controller *master,
> master->dev.coherent_dma_mask = parent->coherent_dma_mask;
> master->dev.dma_parms = parent->dma_parms;
>
> - ret = i3c_bus_init(i3cbus, master->dev.of_node);
> + ret = i3c_bus_init(i3cbus, dev_fwnode(&master->dev));
> if (ret)
> goto err_put_dev;
>
> dev_set_name(&master->dev, "i3c-%d", i3cbus->id);
>
> - ret = of_populate_i3c_bus(master);
> + ret = fwnode_populate_i3c_bus(master);
> if (ret)
> goto err_put_dev;
>
> @@ -3300,11 +3310,14 @@ static int __init i3c_init(void)
> {
> int res;
>
> - res = of_alias_get_highest_id("i3c");
> - if (res >= 0) {
> - mutex_lock(&i3c_core_lock);
> - __i3c_first_dynamic_bus_num = res + 1;
> - mutex_unlock(&i3c_core_lock);
> + /* of_alias_get_highest_id is DT-specific, only call for DT systems */
> + if (IS_ENABLED(CONFIG_OF)) {
> + res = of_alias_get_highest_id("i3c");
> + if (res >= 0) {
> + mutex_lock(&i3c_core_lock);
> + __i3c_first_dynamic_bus_num = res + 1;
> + mutex_unlock(&i3c_core_lock);
> + }
> }
>
> res = bus_register_notifier(&i2c_bus_type, &i2cdev_notifier);
> diff --git a/include/linux/i3c/master.h b/include/linux/i3c/master.h
> index 592b646f6134..6b03a3ce574c 100644
> --- a/include/linux/i3c/master.h
> +++ b/include/linux/i3c/master.h
> @@ -177,7 +177,8 @@ struct i3c_device_ibi_info {
> * @pid: I3C Provisioned ID exposed by the device. This is a unique identifier
> * that may be used to attach boardinfo to i3c_dev_desc when the device
> * does not have a static address
> - * @of_node: optional DT node in case the device has been described in the DT
> + * @fwnode: Firmware node (DT or ACPI) in case the device has been
> + * described in firmware
> *
> * This structure is used to attach board-level information to an I3C device.
> * Not all I3C devices connected on the bus will have a boardinfo. It's only
> @@ -189,7 +190,7 @@ struct i3c_dev_boardinfo {
> u8 init_dyn_addr;
> u8 static_addr;
> u64 pid;
> - struct device_node *of_node;
> + struct fwnode_handle *fwnode;
> };
>
> /**
> --
> 2.50.1
>
© 2016 - 2026 Red Hat, Inc.