The MTP is a one of the boards that comes with the Eliza SoC.
So add dedicated board dts for it.
The initial support enables:
- UART debug console
- Ob-board UFS storage
- Qualcomm RPMh regulators (PMIC) and VPH_PWR
- board specific clocks & reserved GPIO ranges
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/eliza-mtp.dts | 407 +++++++++++++++++++++++++++++++++
2 files changed, 408 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 02921a495b2c..e4dc0aab3bf6 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -14,6 +14,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096sg-db820c.dtb
dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
+dtb-$(CONFIG_ARCH_QCOM) += eliza-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += glymur-crd.dtb
dtb-$(CONFIG_ARCH_QCOM) += hamoa-iot-evk.dtb
diff --git a/arch/arm64/boot/dts/qcom/eliza-mtp.dts b/arch/arm64/boot/dts/qcom/eliza-mtp.dts
new file mode 100644
index 000000000000..90f629800cb0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/eliza-mtp.dts
@@ -0,0 +1,407 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "eliza.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. Eliza MTP";
+ compatible = "qcom,eliza-mtp", "qcom,eliza";
+ chassis-type = "handset";
+
+ aliases {
+ serial0 = &uart14;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ clock-frequency = <76800000>;
+ #clock-cells = <0>;
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32764>;
+ #clock-cells = <0>;
+ };
+
+ bi_tcxo_div2: bi-tcxo-div2-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+
+ bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+
+ clocks = <&rpmhcc RPMH_CXO_CLK_A>;
+ clock-mult = <1>;
+ clock-div = <2>;
+ };
+ };
+
+ vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm7550-rpmh-regulators";
+
+ vdd-l1-supply = <&vreg_s3b>;
+ vdd-l2-l3-supply = <&vreg_s3b>;
+ vdd-l4-l5-supply = <&vreg_s2b>;
+ vdd-l6-supply = <&vreg_s2b>;
+ vdd-l7-supply = <&vreg_s1b>;
+ vdd-l8-supply = <&vreg_s1b>;
+ vdd-l9-l10-supply = <&vreg_s1b>;
+ vdd-l11-supply = <&vreg_s1b>;
+ vdd-l12-l14-supply = <&vreg_bob>;
+ vdd-l13-l16-supply = <&vreg_bob>;
+ vdd-l15-l17-l18-l19-l20-l21-l22-l23-supply = <&vreg_bob>;
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+
+ vdd-bob-supply = <&vph_pwr>;
+
+ qcom,pmic-id = "b";
+
+ vreg_s1b: smps1 {
+ regulator-name = "vreg_s1b";
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <2040000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2b: smps2 {
+ regulator-name = "vreg_s2b";
+ regulator-min-microvolt = <375000>;
+ regulator-max-microvolt = <2744000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s3b: smps3 {
+ regulator-name = "vreg_s3b";
+ regulator-min-microvolt = <375000>;
+ regulator-max-microvolt = <2744000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s4b: smps4 {
+ regulator-name = "vreg_s4b";
+ regulator-min-microvolt = <2156000>;
+ regulator-max-microvolt = <2400000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b: ldo2 {
+ regulator-name = "vreg_l2b";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3b: ldo3 {
+ regulator-name = "vreg_l3b";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4b: ldo4 {
+ regulator-name = "vreg_l4b";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b: ldo6 {
+ regulator-name = "vreg_l6b";
+ regulator-min-microvolt = <866000>;
+ regulator-max-microvolt = <958000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b: ldo7 {
+ regulator-name = "vreg_l7b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b: ldo8 {
+ regulator-name = "vreg_l8b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b: ldo9 {
+ regulator-name = "vreg_l9b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10b: ldo10 {
+ regulator-name = "vreg_l10b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11b: ldo11 {
+ regulator-name = "vreg_l11b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b: ldo12 {
+ regulator-name = "vreg_l12b";
+ /* Voltage range for UFS 3.x and above */
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b: ldo13 {
+ regulator-name = "vreg_l13b";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b: ldo14 {
+ regulator-name = "vreg_l14b";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b: ldo15 {
+ regulator-name = "vreg_l15b";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b: ldo16 {
+ regulator-name = "vreg_l16b";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b: ldo17 {
+ regulator-name = "vreg_l17b";
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18b: ldo18 {
+ regulator-name = "vreg_l18b";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l19b: ldo19 {
+ regulator-name = "vreg_l19b";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l20b: ldo20 {
+ regulator-name = "vreg_l20b";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l21b: ldo21 {
+ regulator-name = "vreg_l21b";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l22b: ldo22 {
+ regulator-name = "vreg_l22b";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l23b: ldo23 {
+ regulator-name = "vreg_l23b";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob: bob {
+ regulator-name = "vreg_bob";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+
+ vdd-l1-supply = <&vreg_s2b>;
+
+ qcom,pmic-id = "d";
+
+ vreg_l1d: ldo1 {
+ regulator-name = "vreg_l1d";
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1260000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+
+ vdd-l1-supply = <&vreg_s2b>;
+ vdd-l3-supply = <&vreg_s2b>;
+
+ qcom,pmic-id = "g";
+
+ vreg_l1g: ldo1 {
+ regulator-name = "vreg_l1g";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1260000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3g: ldo3 {
+ regulator-name = "vreg_l3g";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1260000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ };
+
+ regulators-3 {
+ compatible = "qcom,pmr735d-rpmh-regulators";
+
+ vdd-l1-l2-l5-supply = <&vreg_s3b>;
+ vdd-l3-l4-supply = <&vreg_s2b>;
+ vdd-l6-supply = <&vreg_s1b>;
+ vdd-l7-supply = <&vreg_s3b>;
+
+ qcom,pmic-id = "k";
+
+ vreg_l1k: ldo1 {
+ regulator-name = "vreg_l1k";
+ regulator-min-microvolt = <488000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2k: ldo2 {
+ regulator-name = "vreg_l2k";
+ regulator-min-microvolt = <920000>;
+ regulator-max-microvolt = <969000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3k: ldo3 {
+ regulator-name = "vreg_l3k";
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4k: ldo4 {
+ regulator-name = "vreg_l4k";
+ regulator-min-microvolt = <960000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5k: ldo5 {
+ regulator-name = "vreg_l5k";
+ regulator-min-microvolt = <866000>;
+ regulator-max-microvolt = <931000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6k: ldo6 {
+ regulator-name = "vreg_l6k";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7k: ldo7 {
+ regulator-name = "vreg_l7k";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <958000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <20 4>, /* NFC SPI */
+ <111 2>, /* WCN UART1 */
+ <118 1>; /* NFC Secure I/O */
+};
+
+&uart14 {
+ compatible = "qcom,geni-debug-uart";
+
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l12b>;
+ vcc-max-microamp = <1300000>;
+ vccq-supply = <&vreg_l1d>;
+ vccq-max-microamp = <1200000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l6b>;
+ vdda-pll-supply = <&vreg_l4b>;
+
+ status = "okay";
+};
--
2.48.1On 3/18/26 11:19 AM, Abel Vesa wrote: > The MTP is a one of the boards that comes with the Eliza SoC. > So add dedicated board dts for it. > > The initial support enables: > - UART debug console > - Ob-board UFS storage > - Qualcomm RPMh regulators (PMIC) and VPH_PWR > - board specific clocks & reserved GPIO ranges > > Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> > Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Konrad
On 18/03/2026 11:19, Abel Vesa wrote: > The MTP is a one of the boards that comes with the Eliza SoC. > So add dedicated board dts for it. > > The initial support enables: > - UART debug console > - Ob-board UFS storage > - Qualcomm RPMh regulators (PMIC) and VPH_PWR > - board specific clocks & reserved GPIO ranges > > Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> > Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> > --- Parts of this is my code, so it feels odd to provide review for own pieces, nevertheless I still believe they are correct thus reviewer's statement of oversight applies: Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Best regards, Krzysztof
On Wed, Mar 18, 2026 at 12:19:34PM +0200, Abel Vesa wrote: > The MTP is a one of the boards that comes with the Eliza SoC. > So add dedicated board dts for it. > > The initial support enables: > - UART debug console > - Ob-board UFS storage > - Qualcomm RPMh regulators (PMIC) and VPH_PWR > - board specific clocks & reserved GPIO ranges > > Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> > Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > arch/arm64/boot/dts/qcom/eliza-mtp.dts | 407 +++++++++++++++++++++++++++++++++ > 2 files changed, 408 insertions(+) > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> -- With best wishes Dmitry
© 2016 - 2026 Red Hat, Inc.