Redmi 5A was made by wingtech like Redmi 4A (rolex) and Redmi GO (tiare).
They are very similar, make a common base from riva for avoid
unnecessary code duplications.
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
---
arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts | 308 +-------------------
.../boot/dts/qcom/msm8917-xiaomi-wingtech.dtsi | 315 +++++++++++++++++++++
2 files changed, 318 insertions(+), 305 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts
index 1bfb16f90ddd..4ea4fbdb5ce7 100644
--- a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts
+++ b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts
@@ -5,29 +5,14 @@
/dts-v1/;
-#include <dt-bindings/arm/qcom,ids.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "msm8917.dtsi"
-#include "pm8937.dtsi"
-
-/delete-node/ &qseecom_mem;
+#include "msm8917-xiaomi-wingtech.dtsi"
/ {
model = "Xiaomi Redmi 5A (riva)";
compatible = "xiaomi,riva", "qcom,msm8917";
- chassis-type = "handset";
- qcom,msm-id = <QCOM_ID_MSM8917 0>;
qcom,board-id = <0x1000b 1>, <0x1000b 2>;
- pwm_backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pm8937_pwm 0 100000>;
- brightness-levels = <0 255>;
- num-interpolated-steps = <255>;
- default-brightness-level = <128>;
- };
-
battery: battery {
compatible = "simple-battery";
charge-full-design-microamp-hours = <3000000>;
@@ -38,96 +23,18 @@ battery: battery {
charge-term-current-microamp = <60000>;
voltage-min-design-microvolt = <3400000>;
};
-
- chosen {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- stdout-path = "framebuffer0";
-
- framebuffer0: framebuffer@90001000 {
- compatible = "simple-framebuffer";
- reg = <0x0 0x90001000 0x0 (720 * 1280 * 3)>;
- width = <720>;
- height = <1280>;
- stride = <(720 * 3)>;
- format = "r8g8b8";
-
- clocks = <&gcc GCC_MDSS_AHB_CLK>,
- <&gcc GCC_MDSS_AXI_CLK>,
- <&gcc GCC_MDSS_VSYNC_CLK>,
- <&gcc GCC_MDSS_MDP_CLK>,
- <&gcc GCC_MDSS_BYTE0_CLK>,
- <&gcc GCC_MDSS_PCLK0_CLK>,
- <&gcc GCC_MDSS_ESC0_CLK>;
- power-domains = <&gcc MDSS_GDSC>;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-0 = <&gpio_keys_default>;
- pinctrl-names = "default";
-
- key-volup {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
- debounce-interval = <15>;
- };
- };
-
- vph_pwr: regulator-vph-pwr {
- compatible = "regulator-fixed";
- regulator-name = "vph_pwr";
- regulator-min-microvolt = <3700000>;
- regulator-max-microvolt = <3700000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- reserved-memory {
- qseecom_mem: qseecom@84a00000 {
- reg = <0x0 0x84a00000 0x0 0x1900000>;
- no-map;
- };
-
- framebuffer_mem: memory@90001000 {
- reg = <0x0 0x90001000 0x0 (720 * 1280 * 3)>;
- no-map;
- };
- };
-};
-
-&blsp1_i2c3 {
- status = "okay";
-
- touchscreen@38 {
- compatible = "edt,edt-ft5306";
- reg = <0x38>;
- interrupts-extended = <&tlmm 65 IRQ_TYPE_LEVEL_LOW>;
- reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
- pinctrl-0 = <&tsp_int_rst_default>;
- pinctrl-names = "default";
- vcc-supply = <&pm8937_l10>;
- iovcc-supply = <&pm8937_l5>;
- touchscreen-size-x = <720>;
- touchscreen-size-y = <1280>;
- };
};
&blsp2_i2c1 {
status = "okay";
- bq27426@55 {
+ power-monitor@55 {
compatible = "ti,bq27426";
reg = <0x55>;
monitored-battery = <&battery>;
};
- bq25601@6b {
+ charger@6b {
compatible = "ti,bq25601";
reg = <0x6b>;
interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
@@ -139,172 +46,6 @@ bq25601@6b {
};
};
-&pm8937_gpios {
- pwm_enable_default: pwm-enable-default-state {
- pins = "gpio8";
- function = "dtest2";
- output-low;
- bias-disable;
- qcom,drive-strength = <2>;
- };
-};
-
-&pm8937_pwm {
- pinctrl-0 = <&pwm_enable_default>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&pm8937_resin {
- linux,code = <KEY_VOLUMEDOWN>;
-
- status = "okay";
-};
-
-&rpm_requests {
- regulators-0 {
- compatible = "qcom,rpm-pm8937-regulators";
-
- vdd_s1-supply = <&vph_pwr>;
- vdd_s2-supply = <&vph_pwr>;
- vdd_s3-supply = <&vph_pwr>;
- vdd_s4-supply = <&vph_pwr>;
-
- vdd_l1_l19-supply = <&pm8937_s3>;
- vdd_l2_l23-supply = <&pm8937_s3>;
- vdd_l3-supply = <&pm8937_s3>;
- vdd_l4_l5_l6_l7_l16-supply = <&pm8937_s4>;
- vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
- vdd_l9_l10_l13_l14_l15_l18-supply = <&vph_pwr>;
-
- pm8937_s1: s1 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1225000>;
- };
-
- pm8937_s3: s3 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- };
-
- pm8937_s4: s4 {
- regulator-min-microvolt = <2050000>;
- regulator-max-microvolt = <2050000>;
- };
-
- pm8937_l2: l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- pm8937_l5: l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pm8937_l6: l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pm8937_l7: l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pm8937_l8: l8 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2900000>;
- };
-
- pm8937_l9: l9 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3300000>;
- };
-
- pm8937_l10: l10 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <3000000>;
- };
-
- pm8937_l11: l11 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- regulator-allow-set-load;
- regulator-system-load = <200000>;
- };
-
- pm8937_l12: l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- pm8937_l13: l13 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
- };
-
- pm8937_l14: l14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- pm8937_l15: l15 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- pm8937_l16: l16 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pm8937_l17: l17 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2900000>;
- };
-
- pm8937_l19: l19 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1350000>;
- };
-
- pm8937_l22: l22 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- pm8937_l23: l23 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
- };
-
-};
-
-&sdhc_1 {
- vmmc-supply = <&pm8937_l8>;
- vqmmc-supply = <&pm8937_l5>;
-
- status = "okay";
-};
-
-&sdhc_2 {
- cd-gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&pm8937_l11>;
- vqmmc-supply = <&pm8937_l12>;
- pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
- pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
- pinctrl-names = "default", "sleep";
-
- status = "okay";
-};
-
-&sleep_clk {
- clock-frequency = <32768>;
-};
-
&tlmm {
bq25601_int_default: bq25601-int-default-state {
pins = "gpio61";
@@ -312,47 +53,4 @@ bq25601_int_default: bq25601-int-default-state {
drive-strength = <2>;
bias-pull-up;
};
-
- gpio_keys_default: gpio-keys-default-state {
- pins = "gpio91";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- sdc2_cd_default: sdc2-cd-default-state {
- pins = "gpio67";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- tsp_int_rst_default: tsp-int-rst-default-state {
- pins = "gpio64", "gpio65";
- function = "gpio";
- drive-strength = <8>;
- bias-pull-up;
- };
-};
-
-&wcnss {
- vddpx-supply = <&pm8937_l5>;
-
- status = "okay";
-};
-
-&wcnss_iris {
- compatible = "qcom,wcn3620";
- vddxo-supply = <&pm8937_l7>;
- vddrfa-supply = <&pm8937_l19>;
- vddpa-supply = <&pm8937_l9>;
- vdddig-supply = <&pm8937_l5>;
-};
-
-&wcnss_mem {
- status = "okay";
-};
-
-&xo_board {
- clock-frequency = <19200000>;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8917-xiaomi-wingtech.dtsi b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-wingtech.dtsi
new file mode 100644
index 000000000000..714e75de014b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8917-xiaomi-wingtech.dtsi
@@ -0,0 +1,315 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2023, Barnabas Czeman
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "msm8917.dtsi"
+#include "pm8937.dtsi"
+
+/delete-node/ &qseecom_mem;
+
+/ {
+ chassis-type = "handset";
+
+ qcom,msm-id = <QCOM_ID_MSM8917 0>;
+
+ pwm_backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pm8937_pwm 0 100000>;
+ brightness-levels = <0 255>;
+ num-interpolated-steps = <255>;
+ default-brightness-level = <128>;
+ };
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer {
+ compatible = "simple-framebuffer";
+ memory-region = <&framebuffer_mem>;
+ width = <720>;
+ height = <1280>;
+ stride = <(720 * 3)>;
+ format = "r8g8b8";
+
+ clocks = <&gcc GCC_MDSS_AHB_CLK>,
+ <&gcc GCC_MDSS_AXI_CLK>,
+ <&gcc GCC_MDSS_VSYNC_CLK>,
+ <&gcc GCC_MDSS_MDP_CLK>,
+ <&gcc GCC_MDSS_BYTE0_CLK>,
+ <&gcc GCC_MDSS_PCLK0_CLK>,
+ <&gcc GCC_MDSS_ESC0_CLK>;
+ power-domains = <&gcc MDSS_GDSC>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+
+ key-volup {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ };
+ };
+
+ vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reserved-memory {
+ qseecom_mem: qseecom@84a00000 {
+ reg = <0x0 0x84a00000 0x0 0x1900000>;
+ no-map;
+ };
+
+ framebuffer_mem: memory@90001000 {
+ reg = <0x0 0x90001000 0x0 (720 * 1280 * 3)>;
+ no-map;
+ };
+ };
+};
+
+&blsp1_i2c3 {
+ status = "okay";
+
+ edt_ft5306: touchscreen@38 {
+ compatible = "edt,edt-ft5306";
+ reg = <0x38>;
+ interrupts-extended = <&tlmm 65 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&tsp_int_rst_default>;
+ pinctrl-names = "default";
+ vcc-supply = <&pm8937_l10>;
+ iovcc-supply = <&pm8937_l5>;
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
+
+ status = "disabled";
+ };
+};
+
+&pm8937_gpios {
+ pwm_enable_default: pwm-enable-default-state {
+ pins = "gpio8";
+ function = "dtest2";
+ output-low;
+ bias-disable;
+ qcom,drive-strength = <2>;
+ };
+};
+
+&pm8937_pwm {
+ pinctrl-0 = <&pwm_enable_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pm8937_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators-0 {
+ compatible = "qcom,rpm-pm8937-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+
+ vdd_l1_l19-supply = <&pm8937_s3>;
+ vdd_l2_l23-supply = <&pm8937_s3>;
+ vdd_l3-supply = <&pm8937_s3>;
+ vdd_l4_l5_l6_l7_l16-supply = <&pm8937_s4>;
+ vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
+ vdd_l9_l10_l13_l14_l15_l18-supply = <&vph_pwr>;
+
+ pm8937_s1: s1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8937_s3: s3 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8937_s4: s4 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8937_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8937_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8937_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8937_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8937_l8: l8 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ pm8937_l9: l9 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8937_l10: l10 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8937_l11: l11 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ regulator-system-load = <200000>;
+ };
+
+ pm8937_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8937_l13: l13 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pm8937_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8937_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8937_l16: l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8937_l17: l17 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ pm8937_l19: l19 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8937_l22: l22 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8937_l23: l23 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8937_l8>;
+ vqmmc-supply = <&pm8937_l5>;
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ cd-gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&pm8937_l11>;
+ vqmmc-supply = <&pm8937_l12>;
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32768>;
+};
+
+&tlmm {
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio91";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ sdc2_cd_default: sdc2-cd-default-state {
+ pins = "gpio67";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tsp_int_rst_default: tsp-int-rst-default-state {
+ pins = "gpio64", "gpio65";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
+
+&wcnss {
+ vddpx-supply = <&pm8937_l5>;
+
+ status = "okay";
+};
+
+&wcnss_iris {
+ compatible = "qcom,wcn3620";
+ vddxo-supply = <&pm8937_l7>;
+ vddrfa-supply = <&pm8937_l19>;
+ vddpa-supply = <&pm8937_l9>;
+ vdddig-supply = <&pm8937_l5>;
+};
+
+&wcnss_mem {
+ status = "okay";
+};
+
+&xo_board {
+ clock-frequency = <19200000>;
+};
--
2.53.0
On 3/15/26 5:26 PM, Barnabás Czémán wrote: > Redmi 5A was made by wingtech like Redmi 4A (rolex) and Redmi GO (tiare). > They are very similar, make a common base from riva for avoid > unnecessary code duplications. > > Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Konrad
On Sun, Mar 15, 2026 at 05:26:20PM +0100, Barnabás Czémán wrote: > Redmi 5A was made by wingtech like Redmi 4A (rolex) and Redmi GO (tiare). > They are very similar, make a common base from riva for avoid > unnecessary code duplications. > > Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> > --- > arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts | 308 +------------------- > .../boot/dts/qcom/msm8917-xiaomi-wingtech.dtsi | 315 +++++++++++++++++++++ > 2 files changed, 318 insertions(+), 305 deletions(-) > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> -- With best wishes Dmitry
© 2016 - 2026 Red Hat, Inc.